***Help Rear indicator full of water***

[nizmokid]

Hi guys I need some help in how to remove the rear tail light on a R33 skyline, I undid all the bolts ( I think) and I was trying to remove the plastic facere on the front but cant remove it.

As I have undid all the bolts the rear light should just full out right???

or do I have to remove the rear bumperand there might be some bolt under there to remove the taillight.

all this to drain out some water.........

HELP

[nizmokid]

bump......anyone!

[bless_you]

i share your problem niz,

i am going to have a go on the w/end...

will keep you posted... im also looking for other threads on the subject.

Nate

[Turbo Tits]

had same prob... the assembly is sealed on with that black sealant. just need to use constant pressure, and lots of it, dont bang it. drain the water, remove the old sealant and replace it with fresh stuff. dont use stuff like "no more gaps" or "all clear" or any of those products coz you might want to get the lights out another day use a proper removable automotive sealant for the job. hope that helps.

[streamer]

dudes....

this is what i heard.

*i will not be held responsible on how u mess up or how this messes yr car up if u give it a go*

sometimes not only does the light fill with water, it also condenses.

one way is to get yr drill.. get the smallest one and drill a tiny hole at the bottom of the light.

water drains out and no more misting up or any fogging of any kind

lata