Jump to content
SAU Community

Recommended Posts

hey guys, pretty new here

anyway got a rb20det manual cefiro just finishd conversion.

i trying to start car and there is no fireing at all.

i checked for the constant 12v on center pin on coils it has that but i pulled coils out and put screwdriver down them earthed and tryed to fire unfortunitly no spark there either.

i have changed the relays next to ecu no change.

have tryed numerous amounts of ignitors.same problem.

can any body help me out am going to test for power off ignitor loom later today will post how i go need help asap. also car is getting fuel so no problem there.

Link to comment
https://www.sau.com.au/forums/topic/228950-help-please-no-spark/
Share on other sites

ok i changedd all grounds etc an now we have spark,fuel but its just cranking and not firing at all im stumped .

ive tryed different ignitors upped fuel pressure ,pulled cas sensor out turnd and injectors clikt etc so thats fine.

i done a diagnostic check and it came up with 21 ignition signal.

can some one please help i need to get this thing going so i can go show some form to the ladies down the street hahaha

alright!! good news i put a bolt in the return and blokt it she fired up straight away so we know i have low fuel pressure even the its getting gas.i have replaced standard rb20de pump(car was originally rb20de auto) i replaced it with a twin turbo subaru fuel pump.why is this not giving enough pressure if the pump is biggrer and pumps more than the standard one?

i have a sard fuel reg.gas feeds threw bottem out the side and is in the hose that comes off fuel filter.
It's supposed to be on the return line off the end of the fuel rail. I should probably feed into the side and out the bottom. It's designed to maintain a given pressure in the fuel rail (it's not the actual pump that causes the fuel pressure).

What pressure is it set to maintain?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I believe mine is helical and not clutch type. During drifting one wheel was spining as if it was open diff so bought kazz 1.5 way and has sat on my shelf for the past 5 years as I want to learn shiming process and do it myself   in meantime thought I change the diff oil hence post here. So any 75-90?   i am pretty sure r34 are helical not clutch lsd as standard . That is gtt ones
    • Throw between gears are so much that is getting annoying. I have pro short shifter on my mx5 and e36 and love it . Skyline is getting unbearable    would syncro issues and short shifter is no no? Anyone mind explaining a little on why before i buy cube
    • No. Well, some people "seem to use redline shockproof in the diff". Most do not. I would only contemplate it if you have badly worn CW&P gears. And no. No-one in their right mind has ever put ATF into a diff. Any normal diff/gear oil of the right viscosity will do. Whatever takes your fancy. Castrol, Nulon, Penrite, Redline MT range. Whatever. It's just gears. 75W-90 or 80W-90 is typical. I think that GL-5 is hard to avoid these days, although I think that a GL-4 is probably preferred, given the vintage of the equipment. At least Redline offer a number of GL-4 oils. If you have a clutch type LSD instead of the VLSD, then of course you need a proper LSD oil. Anything from any of the same names above. If you have a helical LSD, then it does not require LSD oil, and the recco is the same as for the VLSD. You don't want the LSD friction modifiers in the oil for a non-clutch type LSD if you can avoid it.  
    • You may want to list it up for a little higher - This price is much lower than you may realize. Here you're pretty much selling to people who most likely already have these things on their own rigs. S chassis people eat this stuff up like you'd not believe.
    • I had my car for over 10 years and done around few thousand miles but never changed the oil. thinking of changing it.   what brand and viscocity would you put in ? people seem to use redline shockproof in the diff   on  contraty seen others using atf dexron 2 or 3 so wanted to check. is it 1 liter?
×
×
  • Create New...