Help Please No Spark

[jmpnho.CEF]

hey guys, pretty new here

anyway got a rb20det manual cefiro just finishd conversion.

i trying to start car and there is no fireing at all.

i checked for the constant 12v on center pin on coils it has that but i pulled coils out and put screwdriver down them earthed and tryed to fire unfortunitly no spark there either.

i have changed the relays next to ecu no change.

have tryed numerous amounts of ignitors.same problem.

can any body help me out am going to test for power off ignitor loom later today will post how i go need help asap. also car is getting fuel so no problem there.

[Shakiel]

Cam angle sensor

[jmpnho.CEF]

ok i changedd all grounds etc an now we have spark,fuel but its just cranking and not firing at all im stumped .

ive tryed different ignitors upped fuel pressure ,pulled cas sensor out turnd and injectors clikt etc so thats fine.

i done a diagnostic check and it came up with 21 ignition signal.

can some one please help i need to get this thing going so i can go show some form to the ladies down the street hahaha

[Shakiel]

Is the ecu and injectors standard or aftermarket?

[abu]

check the fuel lines are on the right way

[GeeTR]

Search the Maintenance section, there was a Swedish dood with the same code 21 - Primary Ignition Signal.

Not a solution, but could give you some idea's, here and here

[jmpnho.CEF]

ecu has been chipped. injectors standard red top .

the feedback is amazing cheers guys

[jmpnho.CEF]

i have a sard fuel reg.gas feeds threw bottem out the side and is in the hose that comes off fuel filter.

[jmpnho.CEF]

alright!! good news i put a bolt in the return and blokt it she fired up straight away so we know i have low fuel pressure even the its getting gas.i have replaced standard rb20de pump(car was originally rb20de auto) i replaced it with a twin turbo subaru fuel pump.why is this not giving enough pressure if the pump is biggrer and pumps more than the standard one?

[QWK32]

what pressure is the sard reg set to? and is the reg on the return line?

did you put in a new fuel filter?

Edited July 23, 2008 by QWK32

[blind_elk]

i have a sard fuel reg.gas feeds threw bottem out the side and is in the hose that comes off fuel filter.

It's supposed to be on the return line off the end of the fuel rail. I should probably feed into the side and out the bottom. It's designed to maintain a given pressure in the fuel rail (it's not the actual pump that causes the fuel pressure).

What pressure is it set to maintain?

[jmpnho.CEF]

ok guys i have just thought about this and you guys made me click the sard regs pressure all over it just jumps around i just relised i need it on return thats why it has no pressure!!