Jump to content
SAU Community

Recommended Posts

Hey guys,

Up for sale is my 180sx. i brought this car stock standered and started my project. i built this car to be a reliable street weapon. which it deffintaly has proven its self there. Ive owned this car for a year now, everything has been done within this time. all work was done by my mechanic "MW performance" no one else touches this car but him. and tunned by matt at PITTS. I have built this car without jumping any steps.

Anyway its time for me to move on. Im selling due to buying a house. im willing to trade plus cash. wouldnt mind a 32 gtr. but would rather cash. EVERYTHING you see on the car has done less than 7000kms. any questions please ask.

Nissan 180sx

-1993 nissan 180sx

-Redtop sr20det

-Manual

-Custom Gunmetal grey

-Black roof

-Sunroof

-145kms

Engine modifications-

-JE 20 thou pistons

-JE total seal rings

-Eagle H-beam rods

-King main bearings

-King big end bearings

-Arp rod bolts

-Arp main bolts

-Fully engine balance

-Arp head bolts

-Port job in/ex sides

-New head service

-Nismo low temp thermostat

-Light weight pullys

-Blue radiator hose and vaccum lines

-Bosch 040 fuel pump

-OS gekin twin plate clutch (rebuilt)

-Freshly rebuilt gearbox

-40mm aloy radiator

-Engine damper

-Greddy 1.2m headgasket

-Garret GT3071

-ALL quailty braided lines

-Garret internal gate

-Custom intercooler piping

-600x300x75 intercooler

-Custom hard intake pipe

-Greddy Sump

-Greddy sandwich plate

-Greddy oilcap

-Greddy watertemp sensor holder thingy

-3inch front back custom exhaust

-Nismo 740cc injectors

-HKS valve springs

-HKS step 2 cam in 272 12mm lift

-HKS step 2 cam ex 272 11.5mm lift

-HKS adjustable cam gears

-HKS rocker arm stoppers

-Apexi power fc

-Apexi pod to suit z32

-Z32 afm

-Oil catch can

-Splitfire coilpacks

-2xBlitz radiator caps

-GFB plumb back bov

Suspension mods-

-Cusco zero1 full adjustable coilovers

-Cusco front sway bar

-Cusco rear sway bar

-Cusco caster rods

-Cusco front struct brace

-Ebay rear struct brace

-R32 calipers and roters

-S15 5 stud setup

Interior mods-

-Cs short shifter

-Tust gearknob

-Ponner splits

-Ponner headunit

-Cadence sub and box

-Eay style 2500wat amp

-Floor matts

-MOMO steering wheel

Electronic mods-

-HKS turbo timer type 1

-Blitz DSBC spec R

-Odyseey pc925 battery

-Power fc hand set

-Defi boost, oil temp, water temp

oil pressure guage

-Defi control unit 2

Exterior mods-

-Vertex kit

-Custom gungrey with black roof

-17inch enkei racing wheels

-window tinting

Im willing to strip some parts to make this car cheaper. I would really rather sell it as a whole package as its perfect as it is. The car made 360rwhp with a dyno sheet to prove on matts dyno. been to 2 other dynos and made 384 and 386rwhp with same boost.

Im after 24.000. If you think this is to much work it out your self. i know you dont get wat you spend on cars as ive gone through this before but to build a car like this u will be spending more than that just on modifications.

P.S i also have a GENUINE trust/greddy t67 turbo kit which includes manifold wastegate piping exhaust etc) greddy plenum, massive greedy intercooler kit and 850cc sard injectors which im willing to sell with the car cheap if there is a quick sale... NOTE ALL THIS STUF IS BRAND NEW NO 2nd hand shit here.

If you are interested pm me for more pics and contact info

post-36892-1216608218_thumb.jpg

post-36892-1216608242_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/228979-highly-modified-180sx-no-more-to-do/
Share on other sites

hey mate,

i got pics but onl willing to email those interested more pics. so send me ur email if ur interestd.

qaurter mile i have no idea but it deffintaly wuld be in the 11s.

here is a pic of the kit i got. more of its down stairs. couldbnt be stuffed carting it all up for a pic.

Also the os gekin twinplate clutch was rebuilt by jim berry (it was his monty clutch builds)

Edited by Sr PWR

IM WILLING TO SELL THE TURBO KIT SEPERATE

GENUINE trust/greddy t67 turbo kit which includes manifold wastegate piping exhaust etc) greddy plenum, massive greedy intercooler kit and 850cc sard injectors, Apexi rsm

Edited by Sr PWR

Have see nthis car in the flesh, is a beautiful example of a 180sx. All good quality parts bulit by Marty from MW performance who own's a 400+rwkw 180sx, woudln't trust my car being bulit on the coast by anyone but MW Performance. Good luck with the sale adam, you really are selling that car for an absolute steal... you should just keep it! :banana:

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Late to this party but here is your go to shop in perth - https://www.facebook.com/gsautoworksau GTSBOY is on the money cost wise, drive in and out will cost you 15-30k or more.    Some items that will save you money  - plug in link ecu g4x is much cheaper than haltech.   -Pulsar turbo, seem to be "OK" now, never used one myself You really don't have to build the motor, E85, headgasket, studs and a good RB26 will live for ever.    Swapping over the twins won't save much as you still need ecu, tune, fuel system etc.          
    • Welcome back to the scene! Godzilla Motorsports were well regarded back in the day.  My GT-R had work done there prior to my ownership.   SRS (Street Race Solutions) in Toowoomba worth a look.  They've built some pretty wild Skylines. Their YouTube channel is comedic to watch!  I'm sure they're all on the glass BBQ but they get shit done! 🤣
    • Hard to say what the extra connector is, it looks a bit like a coax type connector, so possibly a separate radio/GPS antenna, or even another camera input?  The V37 series (including the Q50), did go through a model refresh in 2020, since Australia didn't get any Q50s newer than 2019, we didn't get any of the refreshed models, so there could also be other unexpected problems to overcome to swap an older Q50 head unit into a new model V37. There probably aren't too many people around that have made these sorts of changes to a Q50/V37, so you might end up being the first if you do decide to go ahead. ACP is Apple Car Play and AA is Android Auto, they are roughly the same thing for the 2 major phone operating systems (Apple's iOS and Android), it allows you to connect your phone and access a number of your phone applications on your car system.  With Nav apps included, so you could use google maps/Waze or whatever your favourite navigation app is, instead of using the built in navi system.  I think this would be a better solution if it is only Navigation that you are looking as swapping the head unit for. GPS signals are the same around the globe as the GPS satellites continuously circle the globe, but it is the head unit that doesn't allow you to load Australian maps, or at least no-one had made an Australian map that will load up on the JDM head unit. Regarding the TV standards, I assume you are referring to the AV inputs?  I haven't ever tried to use them, Japan used a slightly modified version of the US NTSC system, and Australia uses PAL for composite video, that said, I wouldn't be surprised if a video input could work with either system.  That is mostly irrelevant here though, unless you plan to use those inputs for something?
    • If you've got bucket loads of $. Go single. If not, just upgrade the twins, Garrett -9's or whatever the current equivalent is for a healthy 350awkw and leave it at that. Will probably still cost you 10k to do in this day and age.
    • When you looking to buy injectors?? I could possibly sell you my 1d1700s for decent price. Done little work I just need bigger again 😫 
×
×
  • Create New...