Jump to content
SAU Community

Turbo Change

niran

By niran,
in Engines & Forced Induction

 Share

Recommended Posts

niran Proficient

niran

Posted
Posted

hey guys.

Currently i have a stock r32 gts-t that is running the standard turbo. However its nearly on its way out and it is screaming, i was told that the vg30 was a good upgrade (the ball bearing one). Just wanted to know if anyone else on sky aus has used this before in this car and if so what does it perform like and is it any good? Also after i buy the turbo i will also install a front mount to go with it.

any advice or help appreciated

thanks niran

Link to comment
https://www.sau.com.au/forums/topic/229046-turbo-change/
Share on other sites
niran Proficient

niran

Posted
  • Author
Posted

hey guys. yer i might try the rb25 turbo. but is there anything good about the vg30 ? is it bigger and is it any better?? and um thanks mate but i was thinking of getting a bigger one and getting rid the rb20 one.

thanks niran

Link to comment
https://www.sau.com.au/forums/topic/229046-turbo-change/#findComment-4027817
Share on other sites
skylinecouple Experienced

skylinecouple

Posted
Posted

First up you need to tell us if you mind a little lag. If you don't then go for the vg housing with RB25 turbo. If you find one the owner will probably ask too much for it so your better off looking for a 2532hks or similar. For the money I'd go hks. Without knowing your goals how can we advise ? How much do you want to spend ?

Link to comment
https://www.sau.com.au/forums/topic/229046-turbo-change/#findComment-4028233
Share on other sites
niran Proficient

niran

Posted
  • Author
Posted

ok hey guys. yer true i could try that one. ok by lag how much lag would i be expecting?.. and um the price for the turbo he is a friend of mine, so he said he will sell it for $350.00 for the ball bearing one with the steal shafts. is that worth it?, it has no shaft play ither.

thanks for all the help guys let us know what you think

niran

Link to comment
https://www.sau.com.au/forums/topic/229046-turbo-change/#findComment-4028467
Share on other sites
niran Proficient

niran

Posted
  • Author
Posted
Im running a VG30/RB25 turbo on my 33.

Its a VG30 rear housing and wheel on an RB25 turbz, I find it is pretty responsive still, and it comes on boost harder than the stocker.

oh realy. i might look around for that see if any one has that for sale. thanks for that

Link to comment
https://www.sau.com.au/forums/topic/229046-turbo-change/#findComment-4028567
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • jez NF
      The Evolution Of "night Fury"

      By jez NF · Posted

      Waaay ahead of ya....(evil laugh!!) Will show the fitment and spec details later when it isnt as rainy !
    • wizlb
      Flex Fuel Kit Workshop

      By wizlb · Posted

      Thanks Dose.....    I appreciate it!!
    • Dose Pipe Sutututu
      Dose's Sometimes DIY and Pay Someone Home & Boat Improvement Thread

      By Dose Pipe Sutututu · Posted

      I'll probably be putting the shit box back on the dyno again soon, I want to dial in the closed loop boost control properly. I'll have a camera facing the car/motor for fun too. Just note, there are essentially 3x 10AN inlets going into the catch can and 1x going back to the intake pipe. Most of the time the catch can "return" to the sump actually is the crank case breather, pushing air out.
    • Piggaz
      Ogura orc1000f vs Osg tr2cd vs Osg r3c experiences, max torque/max hp?

      By Piggaz · Posted

      I have the R3C with a Nismo slave and by no means does it behave like a stocker, it ain’t THAT bad. On take off just give a bit more throttle than you would say a coppermix and it’s fine. It will not slip though.   
    • uchoa
      Yet another RB Neo misfiring thread after reading all the others.

      By uchoa · Posted

      Okay. Final round of testing done. Got a friend to hook up a fancy scanner to the car and we also ran some compression and leakdown tests, she is healthy.  The MAF was definitely the culprit. So for future reference anyone with similar issues that find this thread. I suggest the following steps, in order of affordability:   Check your spark plugs for any fouling, replace plugs if they are bad or re adjust the gaps making it narrower (0.8mm would be good). Check every coil's resistance with a multimeter. It can be done by probing the IB and G pins on the coil pack. Resistance should be around 1.4 (+/- 0.1) Ohms Check the MAF. If you have Nissan connect or a good scanner with the 14 adapter it should allow you to see the voltage on the MAF reading should be around 1.1 - 1.2V when car is idling. But if you don't, buy a new MAF from Amazon and test, then return it. (For instance, I got a Chinese one for $40 that was reporting 1.3v on idle). If you still have scanner, you can run tests on the injectors to see if they are working, just remember to unplug the fuel pump fuse/relay and have no pressure on the line. Then listen for the noises that the injectors make. Clean/replace injectors as needed. Once you find the issue and fix, order thousands of dollars worth of OEM parts to refresh unrelated things (Optional)   PS: Thanks to the absolute legends of this forum for the responses and help to someone that went a bit over their head. (me)
×
×
  • Create New...