Jump to content
SAU Community

Recommended Posts

Location: Moorabbin (Melb)

Contact: Sam

Number: 0417 958 454

**Pickup Only**

ALL ENQUIRIES, PLEASE PHONE ME, I AM NOT CONTACTABLE ON THESE FORUMS

Item: Apexi Power FC

Price: $1000

Condition: Used for 5000km approx. Tuned for S2 R33, full exhaust, FMIC, Bosch 044 fuel pump, std injectors with adjustable fuel pressure reg, High flow turbo running 18psi - 220kw, standard motor.

Item: Z32 AFM with plug

Price: $220

Condition: Used for 5000km approx

Item: R33 5spd gearbox with almost worn 5 puck ceramic exceedy clutch, and tail shaft(R33)

Price: $1500 ono

Condition: Done 108,000km, excellent condition

Item: R33 S2 motor, Does NOT come with turbo, fuel rail, injectors or coil packs. Does include head (perfect condition) with adjustable exhaust cam gear. Includes flywheel.

Price: $350 ono

Condition: Block has slight damage near water pump(as seen in pics), sump is bent, otherwise in excelent condition.

Item: R33 s2 diff

Price: $300

Condition: excelent

Item: R33 brakes (calipers, rotors, entire assembly) front+rear

Price: $500

Condition: excelent

Item: White R33 rear boot lid with drift style rear spoiler including hinges and struts

Price: $350

Condition: Perfect condition

Item: White original R33 S2 rear wing

Price: $50

Condition: excellent

Item: R33 tail lights

Price: $100 each

Condition: perfect, working condition

Item: R33 GT-R rear sway bar

Price: $50

Condition: excellent condition

Item: R33 S2 interior (front seats, rear seats, rear trims, scuff plates)

Price: $350

Condition: perfect, no marks, no holes, as new

Item: R33 floor mats

Price: $100

Condition: excellent

Item: R33 split dump and front pipe (1pce) - stainless

Price: $130

Condition: Slight damage on wastegate pipe - can be repaired

Item: Drivers door - white (not including mirror). Includes glass, hinges electric window motor etc.

Price: $250

Condition: very small damage to door trim. Paintwork very good condition.

Item: Passenger door - white (not including mirror) otherwise complete

Price: $300

Condition: Excellent to perfect condition

Item: mirrors

Price: $100 each

Condition: Excellent condition

Item: Rear insert (goes between lights / under bootlid - reads skyline), white S2

Price: $50

Condition: Excellent

Item: White R33 fuel cap

Price: $50

Condition: Excellent

Item: Electric antenna

Price: $50

Condition: excellent

Item: R33 white rear bar (custom modified to make number plate area neater for aus plates)

Price: $200

Condition: Very good

Item: Inlet pipe with factory blow off valve fitted

Price: $50

Condition: excellent

Item: Automer guage (boost with cup and mounting bracket)

Price: $50 ono

Condition: excellent

Item: Automer guage (oil pressure)

Price: $30 ono

Condition: new in box

Item: drift Catch can

Price: $20

Condition: scratched, but perfect working order

Item: Blitz pod filter

Price: $150

Condition: very good condition

more pics to follow

post-53724-1216640113_thumb.jpg

post-53724-1216640122_thumb.jpg

post-53724-1216640136_thumb.jpg

post-53724-1216640145_thumb.jpg

post-53724-1216640154_thumb.jpg

post-53724-1216640164_thumb.jpg

post-53724-1216640178_thumb.jpg

post-53724-1216640202_thumb.jpg

post-53724-1216640222_thumb.jpg

post-53724-1216640232_thumb.jpg

post-53724-1216640250_thumb.jpg

post-53724-1216640261_thumb.jpg

post-53724-1216640270_thumb.jpg

post-53724-1216640294_thumb.jpg

post-53724-1216640303_thumb.jpg

post-53724-1216640315_thumb.jpg

Edited by gucc_33
Link to comment
https://www.sau.com.au/forums/topic/229077-wrecking-r33-gtst/
Share on other sites

ill do tail lights for 150 and i am willing to split up the brakes and power fc comes with hand controler. please call do not have the net and have to rely on a friend so is hard for me to be on line. cheers

I got a S2 rear wing off this guy today. He is a very genuine and friendly bloke. I went and picked it up today from Moorabbin. As mentioned above, for a fast reply please sms or call him for info on the stuff . I don't think he is on this site to often.

Thanks again Sam and all the best selling the rest of the parts.

Also for sale:

Item Adjustable exhaust Cam gear

Price $50

Condition Excellent, like new

Please note, I can't always get on the net, I need to use my neighbours computer to post, please call the number in the first post if you are serious about buying something.

Cheers,

Sam

  • 8 months later...
  • 3 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Gday, Due to not finding much up to date info on this topic I thought I'd make a thread to get peoples latest opinions/recommendations. Background info -  I've got a S1.5 R33 GTST as a fun project car, mainly for street use and occasional drag strip, apart from all the cosmetic things I'll be doing a full rebuild of the engine with forged internals. Since it'll be getting new cams (kelford) and springs to match I thought I might as well get new lifters and valves while I'm at it, the dash says 160k KMs but the engine seems pretty tired, compression measures about 130psi across all cylinders so I'd like to freshen everything up. This is where I'm tempted to just fork out the extra and go solid lifters while it's all apart, aiming for 400-450kw atw with a flex tune. Assuming all supporting mods (oiling, fuel and all bolt ons) with a lightly ported head and turbo to match (yet to make a decision possibly gtx3582r or similar from Hypergear) I've seen the Tomei kits with just the buckets getting around, Supertech sells most things - Supertech High Performance Cam Followers | Trusted Racing Cam Followers Questions -  Has anyone found the Hydraulic lifters to limit them at this power level? Is it usually found that you can just clean the stock lifters and find they work fine?  Does going solid lifters save any headaches/issues with hydraulic lifters in the future? Any recommendations on other things that will need to be replaced, I know I'll need to get the solid profile cams but can you use the same type of valves and springs/retainers and is it recommended to change the guides and stem seals?    Summary -  Basically looking for pros/cons and wanna know if I'll actually need the extra RPMs from solid lifters or it'll just be bragging rights to say it ReVs OvEr 8000 Cheers
    • Ha ha ha, this stuff they had was installing Toshiba PLCs that were made some time in the 1990s, and they were replacing GEM80 PLCs. To let those two talk (staged upgrade along a ~1.2km long building that was split into 4 sections), was a bunch of WinXP machines running Java gateways... There was no way to put something like ProfiSafe in... Most of the HMI machines were WinXP, with Java program, with a custom button board emulating a keyboard... About the only buttons in the operator stations that went direct to the PLCs was the eStop. There was some interesting design stuff in that place...
    • Stock bypass valves are good for plenty of boost.
    • Check for fuel flow out of the outlet end of the rail. Check for spark. Try to start with aerostart (or pressure can brake cleaner or similar solvent in a car) prayed in through TB. If you have fuel and you have spark and it will fire on substitute fuel, then seriously suspect that E85 sitting for ages in your fuel system has destroyed something and put it in your injectors.
    • Nissan stock oil pressure is typically about 1 bar at 1000 rpm plus about 1 bar per thousand revs on top.
×
×
  • Create New...