Jump to content
SAU Community

Recommended Posts

Hey Guys n Girls,

My car is currently going into compliance, and i was just wondering what steps come next, to get it registered n stuff. I know it has to

get blue slip n stuff, but can you get it registered straight away? Also i heard something about needing to get an inspection done like a

month after all this? I read the importing faq but it didnt seem to quite answer this, can anyone help me out? Oh im in NSW by the way!

Cheers,

Alex

Link to comment
https://www.sau.com.au/forums/topic/229101-after-compliance/
Share on other sites

You will have to get a blue slip then your green slip and take that to the rta with all your import papers and lots of money, then they will stuff around for ages as they will not know what they are doing ( so make sure you have plenty of time and dont go in there at 5 to 5 or they wont do it for you). They will then tell you that you have to go and get it inspected at a rta inspection center and that takes up to a mounth to get in, but what you need to do is tell them that this is the only car you have use of at the moment and they have to give you a interim redgo till the inspection gets done. Now through all this you need to be really nice to all these people as if you are not they can be a real pain in the butt. That is all the stuff i had to go through. Cheers Andrew.

It should be this way, but unfortunately some VicRoads employees have minced beef for brains.

Every VicRoads has their own things they look for when inspecting imports. need CIN, import approval, contract of sale, and RWC for rego. See Vic threads for more info.

At vicroads because the car has to submitted with a RWC the only thing they have to check is that all the numbers match what is on the paperwork and the compliance plate is installed and all obvious things done that would be a compliance issue.
so wat do they actually check at this inspection?

I think it is just a 3rd party inspection and identification i hope for your sake it is farly standard. I had lowered springs on mine and they said nothing but so you can get away with a bit but that was my car not yours, but i dont think they look at much as it only took a couple of 10 minutes or less. all the best.

i think the main hassle is getting time off work to go get it inspected...im getting the shop to put everything back on my car (xenons and the like) after its complied but speaking to the rta the inspection is basically just to make sure the id of the car is correct n stuff like that

i think the main hassle is getting time off work to go get it inspected...im getting the shop to put everything back on my car (xenons and the like) after its complied but speaking to the rta the inspection is basically just to make sure the id of the car is correct n stuff like that

As for the inspection i think you are right about the id check and as for time i did mine as the first one for the day at 6 in the morning and i had to drive for an hour to get there.

Alex you'll probably get picked up for a VIIU inspection when you apply for rego but it's nothing to worry about. All they do is check the car to see if it's a rebirth by checking the VIN and Engine numbers, Apparently it doesn't cost anything but don't take that as gospel.

Ok i done mine on thursday the guy at vicroads nice bloke happened to own a tuff looking vl turbo in the carpark (bonus for me) all he was concern about was the vin,compliance plate and engine number other than that he didnt even look at the car he did notice my pod and intercooler being non roadworthy in vic as only one intake mod allowed but he didnt say anything just checked all the numbers matched the paperwork provided and i was on my way out the door with new plates and a smile and $860 lighter for the previledge

Alex you'll probably get picked up for a VIIU inspection when you apply for rego but it's nothing to worry about. All they do is check the car to see if it's a rebirth by checking the VIN and Engine numbers, Apparently it doesn't cost anything but don't take that as gospel.

actually it costs about $30 and yes you have to pay for it. :P

the process is very simple. after compliance you need to buy your CTP greenslip. since the car has never been registered in NSW you need an establishment greenslip (as it will have no rego, or rego expiry on it). You also need to pick up a copy of it in person. Just buy it over the phone, then go to the closest branch to pick up the print out. you will also need a blueslip (costs about $120). usually the compliance workshop can organise for you the blueslip.

once you have the blueslip, rego form (blueslip workshop gives you that), greenslip, orignal invoice, import approval and your money then just go to the RTA. they process the rego, give you the bill (rego, stamp duty, plates fee). now you will most likely get pinned for a random vehicle identity check. yes it is random, there has been a rumour for a while that they do all imports, but I have personally registered cars I've imported and not had to do the identity check. if you get selected for it basically you make an appointment at one of the locations they have, usually it's a month or more waiting time, and in the meantime they wont do your rego. the inspection is just to ensure your car is not a rebirth, or stolen, or VIN change etc. if you are nice the kind RTA employee might give you a interim label and plates so that you can legally drive your car till the inspection can be done. once the inspections done you just go back to the RTA and finish off your rego.

wow now arent u just full of information :wave: thanks muchly!

the car is all done compliance wise and yes they are doing a blue slip for me, but im waitin for them to send me a damn invoice through so i can pay and get her taken home to my place!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah everyone always seems to refer to them as S13 wheels however they came on R32 Skyline, A31 Cefiro, C33 Laurel etc., and also came polished diamond cut or painted depending on the model. Congrats on your GTS purchase! I'd personally leave it NA.
    • In this thing about this 100% renewal energy stuff I hear no one really talking about anything other than power and fuel really Power and fuel, whilst being a huge part of how we use the billion year old Dinosaur juices, are only 2, of the probably thousands of things that we need to use it for in the chemicals industries for making nearly everything we use nowadays I'm all for a clean planet, but if we want to continue to have all the day to day appliances and stuff that we rely on everyday we will still need fossil fuels Whilst I do love science, and how it can bring innovation, there's really a limit to how far it can go in relation to "going green" As for EV's, unless your charging of your own solar panels, it isn't helping the environment when you consider the the batteries, the mining processes required,  the manufacturing process required, and how long a batteries (read: the vehicle) lasts long term If I was supreme dictator of the world, I would ban the use of sugar for fizzy drinks and food additives and use that for ethanol manufacturing, petrol engines would be happier, and people would be alot healthier  Disclaimer: Whiskey manufacturing would still be required, so says the supreme dictator of the world Same same for all the vegetable oils that get pumped into all our food, use that for bio diesel Disclaimer: the supreme dictator would still require olive oil to dip his bread in This would take some of heat off the use of the use of fossil fuels which are required for everything we use, unless you want to go back to pre 1800 for heat and power, or the early 1900's for plastics and every thing else that has come from cracking ethylene  Would I be a fair and just dictator, nope, and I would probably be assassinated within my first few months, but would my cunning plan work, maybe, for a while, maybe not Meh, in the end in an over opinionated mildly educated arsehole typing out my vomit on my mobile phone, which wouldn't be possible without fossil fuels And if your into conspiracies, we only need the fossil fuels to last until a meteor hits, or thermonuclear annihilation, that would definitely fix our need for fossil fuels for manufacturing and power issues for quite some time  Meh, time for this boomer to cook his lunch on his electric stove and then maybe go for a drive in my petrol car, for fun    
    • It really helps that light duty vehicles have absolutely appalling average efficiency due to poor average load. Like 25% average brake thermal efficiency when peak is somewhere around 38% these days. So even a 60% BTE stationary natural gas plant + transmission and charging losses still doing much better with an EV than conventional ICE. And that's before we get into renewables or "low carbon nonrenewable" nuclear which makes it a no-brainer, basically. In commercial aircraft or heavy duty diesel pulling some ridiculous amount of weight across a continent the numbers are much more difficult to make work. I honestly think in 5-10 years we will still be seeing something like the Achates opposed piston diesels in most semi trucks running on a blend of renewable/biodiesel. Applications where the energy density of diesel is just too critical to compromise. CARB is running trials of those engines right now to evaluate in real world drayage ops, probably because they're noticing that the numbers just don't work for electrification unless our plan is to make glorified electric trains with high voltage wires running along every major highway and only a token amount of battery to make it 30 miles or something like that after detaching. Transport emissions is not insignificant especially in the US, but yes there's a lot of industrial processes that also need to be decarbonized. I agree the scale of the problem is pretty insane but EDF managed to generate ~360 TWh from their nuclear reactors last year and this is with decades of underinvestment after the initial big push in the 70s and 80s. I don't think the frame of reference should be solar-limited. France is not exactly a big country either. Maybe it doesn't work everywhere, but it doesn't have to either. We just can't live off of fracking forever and expect things to be ok.
    • Yeah, all the crude is used for fuels and petrochem feedstocks (pesticides, many other chemicals, etc etc). But increasingly over the last few decades, much of the petrochem synthessis has started with methane because NG has been cheaper than oil, cleaner and easier and more consistent to work with, etc etc etc. So it's really had to say what the fraction either way is. Suffice to say - the direct fuels fraction is not insigificant. Heavy transport uses excruciatingly large amounts. Diesel is wasted in jet heaters in North American garages and workshops, thrown down drill holes in quarries, pissed all over the wall to provide electricity to certain outback communities, etc etc. Obviously road transport, and our pet project, recreational consumption camouflaged as road transport, is a smaller fraction of the total liquid HC consumption again. If you're talking aboust Aussie cars' contribution to the absolute total CO2 production of the country, then of course our share of the cubic mile of coal that is used for power generation, metallurgy, etc adds up to a big chunk. Then there is the consumption of timber. Did you know that the production of silicon metal, for example, is done in Australia by using hardwood? And f**king lots and lots and lots of hardwood at that. Until recently, it was f**king jarrah! There are many such sneaky contributors to CO2 production in industry and farming. NG is used in massive quantities in Australia, for power gen, for running huge water pumps (like, 1-2MW sized caterpillar V16 engines running flat out pumping water) for places like mine sites and minerals/metals refineries. And there are just a huge number of those sort of things going on quietly in the background. So NG use is a big fraction of total CO2 production here. I mean, shit, I personally design burners that are used in furnaces here in Oz that use multiple MW of gas all day every day. The largest such that I've done (not here in Oz) was rated to 150MW. One. Single. Gas burner. In a cement clinker kiln. There are thousands of such things out there in the world. There are double digits of them just here in Oz. (OK< just barely double digits now that a lot of them have shut - and they are all <100MW). But it's all the same to me. People in the car world (like this forum's users) would like to think that you only have to create an industrial capability to replace the fuel that they will be using in 10 years time, and imagine that everyone else will be driving EVs. And while the latter part of that is largely true, the liquid HC fuel industry as a whole is so much more massive than the bit used for cars, that there will be no commercial pressure to produce "renewable" "synthetic" fuels just for cars, when 100x that much would still be being burnt straight from the well. You have to replace it all, or you're not doing what is required. And then you get back to my massive numbers. People don't handle massive numbers at all well. Once you get past about 7 or 8 zeros, it becomes meaningless for most people.
    • @GTSBoy out of the cubic mile of crude oil we burn each year, I wonder how much of that is actually used for providing petrol and diesel.   From memory the figure for cars in Australia, is that they only add up to about 2 to 3% of our CO2 production. Which means something else here is burning a shit tonne of stuff to make CO2, and we're not really straight up burning oil everywhere, so our CO2 production is coming from elsewhere too.   Also we should totally just run thermal energy from deep in the ground. That way we can start to cool the inside of the planet and reverse global warming (PS, this last paragraph is a total piss take)
×
×
  • Create New...