Jump to content
SAU Community

Recommended Posts

The problem with streaking all comes down to what rag/cloth you are using.

Gotta use rags that feel really dry and rough (towels, flannelet etc)

not smooth or soft...

Best method i have found is.....

Use 2 rags, spray glass and wipe with first rag till most of window cleaner gone...doesn't have to be perfect then spray the glass again but a bit less and wipe with second rag until dry and all streaks gone.

the more dry your rags are the better the result

:(

All of the above works but if you want it looking really wicked then let whatever you have used fully dry, then get yourself one of those microfibre dust cloths (got mine in a $2 shop for... $2 :) ) It also works really wicked on your paint work, makes it come up as if you had it cut and polished, everything needs to be completely dry to do it properly. I have one for my windows, one for the paint work and one for the mags :P

very mild soapy water on window tint only I wouldn't trust anyhting else, especially if you don't know what quality tinting film you have..

+1 for newspaper and vinegar...

Although after washing my car I usually stop by the servo and use their paper towels and if your careful you don't get the lint effect...

i use this window cleaning foam and a special square like pillow made for cleaning car windows it is soft but slightly Abrasive after i rub the foam of with it i go over it with a micro fibre cloth. After that they are pretty much crystal.

Oh and i got both products from supercheap auto.

Edited by phenline

phenline i think i have both the products you are talking about! i found the spray worked awsome sometimes and others it streaked really bad...figured i was using to much of it. I may have to try it with a 2nd cloth to wipe at the end and see how i go.

In regards to metho i think it stuffed my rear window tint(old man put it in my washer bottle) the tint likes whiteish from the inside but i noticed it not long after i got the car so i dont know if it was like it when i got it.

is metho bad for window tint?
phenline i think i have both the products you are talking about! i found the spray worked awsome sometimes and others it streaked really bad...figured i was using to much of it. I may have to try it with a 2nd cloth to wipe at the end and see how i go.

In regards to metho i think it stuffed my rear window tint(old man put it in my washer bottle) the tint likes whiteish from the inside but i noticed it not long after i got the car so i dont know if it was like it when i got it.

Metho is a window cleaner, as I read last time.

But I would not use it on your window tint.

I ment clean the outside of the windows with metho don't rub it in on the inside where your tint is.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My idle is set at 950rpm though - Moving the timing around 20 degrees is not really what I'd call a calm idle. That said... neither is chop, by definition. The LS ECU likes to adjust timing to hold idle as opposed to air. It'd work, but generally speaking there'd be a discrepancy in the base idle and the IACV would want to move the timing around anyway to maintain said idle. I think I'm just going to keep the timing steady anyway. Preserve my engine mounts.  My aircon is now officially regassed. As the guy was reversing I noticed my reverse lights do not operate, along with my reverse cam. This is a bit distressing, because 100% of guides talk about which wire to connect to backup cams as "the goes with the [other color] wire". Often when doing conversions. Unfortunately the R34 colour wires aren't documented Unfortunately I had a T56 Magnum gearbox with it's reverse switch, which also isn't documented. Unfortunately there's definitely not documentation for people with both of these in the one car. Unfortunately I forgot. After many hours of this, I have a reverse cam and reverse lights again. The wire going through the trans tunnel to the reverse switch had broken. Upon inspection, it looks like this one wire had about 7 spade terminals and extensions in it.. for reasons I cannot possibly comprehend. I also spent the 750 hours required to clean up the wiring behind my head unit which now looks like this: This is a monumental improvement relative to what used to be there WRT triple gauges, head unit, traction control, wideband controller, and whatever the f**k OEM stuff still exists there in various states of connectivity/needed. Next step is to check in at the Exhaust shop to see/confirm how much clearance I have, to decide what mid mufflers or 'resonators' (which are just straight through, narrower mufflers) I can add and hopefully cut out a lot of exhaust leaks, pinhole, v-band or otherwise. But first step will be to 'take a look' before the next step.
    • Fark the AFM card and Nistune, Haltech Nexus S3, DBW, cruise control, flex fuel, dis dat.  
    • It's most likely the bolt/bush where the cover bolts back wore and allowed cover to move forward.
    • Still haven't put the injectors and R35 AFM in so we can tune the bloody thing for the HG highflow it got mid last year! I think I can forecast the upgrade path to a bigger twin scroll, external gate, Haltech, flex setup, Samsonas, dis dat, etc will be .... a while away!
    • Should have taken that opportunity to slot in a twin scroll turbo setup. Maybe next time.
×
×
  • Create New...