Jump to content
SAU Community

Recommended Posts

I know frieght will be expensive, but will prob buy 2 - 4 engines, shipping should be tha same as I pay for a whole, dont know the word in english. Storage area, shipping wise. It wont be weight that has the final word on price. Arg. Bad explanation.

Im sorry, but want a used block as I want to build it myself. But thanks!

Link to comment
https://www.sau.com.au/forums/topic/229409-rb30-block/#findComment-4032841
Share on other sites

you get a whole shipping container? so you can put as much stuff in it as you want?

blocks like that are very easy to get over here, very cheap too, but will be hard to find someone who is willing to get it to the docks/onto the ship. because they are so cheap, its too much effort for something so worthless here

Link to comment
https://www.sau.com.au/forums/topic/229409-rb30-block/#findComment-4033641
Share on other sites

hello for shipping get a SLATTED wooden crate made to ISPM15 standard ( the standard for importing/ exporting wood so you do not get any problems with customs. or need fumigation to kill bugs.) get it made as small as possible to avoid shipping costs and also making it cheaper to buy the box. this way you can lock the motors into the crate. then any damage to the motors had to be there b4 it was packed. that way no 1 can blame the shipping company for rough handling or stolen parts. a pine sealed crate should cost you roughly $40 per square meter of box surface area. a slatted crate would be rougly $35.

to actualy ship the crate i would contact either ANTRAK logistics or ROHLIG both are massive multi-nationals i'd expect it to cost about 400 for a good export quality crate + roughly $1000+ for freight. and about 6-8 weeks waiting around.

regards

chris

Link to comment
https://www.sau.com.au/forums/topic/229409-rb30-block/#findComment-4034102
Share on other sites

you get a whole shipping container? so you can put as much stuff in it as you want?

blocks like that are very easy to get over here, very cheap too, but will be hard to find someone who is willing to get it to the docks/onto the ship. because they are so cheap, its too much effort for something so worthless here

You mean FCL - Full Container Load

Thats not cheap.

An LCL - Less than Container Load shipment is what you want.

If you are going to be shipping less then say 10CBM then LCL is the way to go.

If you have MORE than 10CBM then an FCL would be the best bet(even if you only half fill it) because you will pay minimum charges on each CBM when shipping LCL but a set rate for FCL.

Basically to make it all simple:

1) Contact a freight forwarder and tell them what you want to do. (number of packages, weight, Cubic dimensions, load port+destination port)

2) Discuss with chosen freight forwarder what services they can offer you (door to door, door to port, CIF, DDU etc)

3) Contact an automotive wrecker in Australia and make sure they have "X" amount of RB30 engines for you to purchase.

4) Contact your freight forwarder and advise them of your purchase and either do an International funds transfer to pay the wrecker or sign a letter of authority for the freight forwarder to act on your behalf and pay/collect engines from the wrecker and transport to forwarders depot for export pack.

5) Freight forwarder will then arrange for overseas export. They will have an agent in your country that can arrange the delivery of the engines to your door.

It's not that hard.

Link to comment
https://www.sau.com.au/forums/topic/229409-rb30-block/#findComment-4034947
Share on other sites

hello for shipping get a SLATTED wooden crate made to ISPM15 standard ( the standard for importing/ exporting wood so you do not get any problems with customs. or need fumigation to kill bugs.) get it made as small as possible to avoid shipping costs and also making it cheaper to buy the box. this way you can lock the motors into the crate. then any damage to the motors had to be there b4 it was packed. that way no 1 can blame the shipping company for rough handling or stolen parts. a pine sealed crate should cost you roughly $40 per square meter of box surface area. a slatted crate would be rougly $35.

to actualy ship the crate i would contact either ANTRAK logistics or ROHLIG both are massive multi-nationals i'd expect it to cost about 400 for a good export quality crate + roughly $1000+ for freight. and about 6-8 weeks waiting around.

regards

chris

Why bother with ISPM15 compliant packaging? There is nothing to comply to.

He's importing into denmark which has no natural boundries so QUARANTINE (not customs) risks are null and void

Link to comment
https://www.sau.com.au/forums/topic/229409-rb30-block/#findComment-4034954
Share on other sites

I posted one to canada, cost $650 AUD in shipping, including the plastic pallet. The charges were based on weight alone. I can organise some for you if you are interested

That would have been airfreight?

And it's not based on weight alone.

It's called CHARGEABLE WEIGHT, which is calculated with a formula. i.e. 100kg of feathers will have a greater chargable weight then 100kg of lead because the feathers take up more space in the aircraft so you have to pay more. (lame example I know, but thats how is works)

Link to comment
https://www.sau.com.au/forums/topic/229409-rb30-block/#findComment-4034982
Share on other sites

Why bother with ISPM15 compliant packaging? There is nothing to comply to.

He's importing into denmark which has no natural boundries so QUARANTINE (not customs) risks are null and void

ah fair enough, im not to familiar with Customs over that way in the world. At work i deal with a company called "cratemaster" all boxs/crates and timber are to ISPM15 so i just get every thing to that standard then i can guarentee that im not gonna get any unexpected fee's or calls from customs. But saying that i'd imagion most freight packaging suppliers would be complient. but in reality it wouldn't matter as long as the wood is good clean stuff.

regards

chris

Link to comment
https://www.sau.com.au/forums/topic/229409-rb30-block/#findComment-4035339
Share on other sites

That would have been airfreight?

And it's not based on weight alone.

It's called CHARGEABLE WEIGHT, which is calculated with a formula. i.e. 100kg of feathers will have a greater chargable weight then 100kg of lead because the feathers take up more space in the aircraft so you have to pay more. (lame example I know, but thats how is works)

It was sea freight, took 5 weeks. It was based on weight alone, as the chargeable weight dimensions for 140kg was over 1 cubic meter, therefore the same motor weighing 50kg would have been heaps cheaper. Put it this way, if it had been a140kg block of steel, it would have cost the same

Link to comment
https://www.sau.com.au/forums/topic/229409-rb30-block/#findComment-4037018
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've owned a few scooters over the years, a Vespa PX oil burner was my first scooter, followed by a few others, including a little 50cc BeeWee that I used as a barracks bike, and I've had a blast on all of them, they really are the cheapest for of city/suburb transport around The only issue with scooters in Australia is lots of people look down on them due to their size,  maybe they need a big bike to make up for something else where they are lacking, unlike Europe and Asia where every man an their dog owns one, and now that filtering is legal in NSW, local traffic is never a issue Not to say I haven't owned my share of big cc bikes over the years, but they were for more blasting through the hills or Hwy riding where it needed to sit on Hwy speeds Safety wise, I ride like everyone is always trying to kill me, everyone is running a red, or running stop/give way signs, or generally asleep at the wheel, which most people are duringtheir commute, I also ride really safe, and give myself, and everyone else enough room in case I need to pull some hasty evasive actions, I've done a few rider training days over the years, which has come in handy on more than a few occasions  As for mods, there's nothing really, and yes your right about aftermarket exhaust, all you get is loud and obnoxious noises from them, like every 250-300 cc you hear with a aftermarket muffler, in saying this I did put a rear muffler from a 125 Aprilla on one of my old 125 scooters, it was horrendous and no amount of full face helmet and ear plugs would dampen that noise As for coming from the Harley, and what a overpriced POS that was, I no longer do big rides as my poor old busted joints ache after about 1/2 an hour of riding, long cruises are so much more enjoyable now in a car, so a big bike would be pointless   
    • Oh wow, it's easy to forget how cheap these can be. Probably the cheapest way to travel. Though people in cars here tend to be morons and I would not feel very safe. Were scooters ever big in Australia? It used to be the thing growing up in Europe ~20 years ago. 50/70/125ccm Peugeot or Yamaha and some others. Utterly obnoxious Polini race exhausts. Kick stands that slant as much as possible. So loud. So much noise for really not moving very fast at all. But it felt cool at the time. Not sure where I'm going with this, but there is an aftermarket for mopeds! Though I'd have pictured you more for a Goldwing kind of guy after growing out of the Harley.
    • You need to know I am sorry for this.  
    • As the MX5 isn't apparently "manly" enough, and I need something for runs to the local shops, and also take to my part time job at the salon, basically I can keep the MX5 away from car parks and stuff......like "flying lockers", I was wondering what I could buy to fix this issue LOL, I pick up a new Yamaha 125 Delight this arvo from Trooper Lu, basically a R1 that you can fit a slab of beer on between your feet, also, it was $29400 cheaper than a R1, so actually it's 2 x better than a R1    
    • Nah. H2S. H2S is "rotten egg gas", which is what is associated with no cat. SO2 is equally nasty, and if you've ever smelt it you'll know all about it. More of a choking, acid in the back of the throat sort of thing. But you can only smell it in a narrow range up to about 1ppm. Above that, it irritates your mucous membranes, but you don't smell it.
×
×
  • Create New...