Bit Of Suprise... Nice Rb20 Setup

[Evil34]

Out of interest, can you modify the RB26 D-Jetro computer to suit the RB25 Neo motor or not?

[AD4M]

My standerd internal RB20 had a TD06H-20g running a 16c rear housing, stock rb25 exhaust mani and a tial 38mm gate mounted directly on the turbine housing. 405rwhp or 302rwkw for you eastern staters on 26psi/1.8 bar and pump fuel.

[Roy]

Adam, your results and drag times are a pin up for all us RB20 guys, lol 1.8bar and all. However Whilst your thing made the power, at 5,000rpm if you were using a 8cm housing you would have doubled the power you were making

[R31Nismoid]

GT - how about you get that Cossie working first

[grandmasterb]

Bin the 10cm housing. They make about the same peak power, but at 4,500rpm you will be losing 50-60rwkws

Id love to but $$$'s just dont see that happening anytime soon so will have to stick with it and see how it goes.

[RS500]

GT - how about you get that Cossie working first

hehe, it is working.

picked it up from the auto elec. yesterday, just need to service and fine tune it which will be soon.

[grandmasterb]

Used this to try a quick theory i had regarding d-jetro and other rb engines so i fired one up on a R33 first then fiinally fitted it up into this R31.

Std Rb20

Rx7 injectors

Thai plenum

Trust TD06-l2 -20g (2 litre nirvana)

rb26 d jetro

277rwkw @1.2bar

408Nm@6100

Real nice car to drive, lots of usuable power and screams like crazy over 4500 and has phenomenaly strong mid and top... will interesting to see it lap winton this weekend,

I forgot to ask Trent/Wheezy, is the car running an EBC, the full L2 kit and what size waste gate spring???

Cheers Ben

[Wheezy]

Standard Trust waste gate (42.5mm) with 0.7bar spring IIRC

Blitz ID3 (Dual Solenoid) EBC

[grandmasterb]

Standard Trust waste gate (42.5mm) with 0.7bar spring IIRC

Blitz ID3 (Dual Solenoid) EBC

Ah ok, my kit came with the Type R 47mm gate and i'll be running the 1.5bar spring but still contemplating if i should get an EBC or tune it with the turbotech first then borrow one to see if there are any gains to warrant the extra $$$'s

Im looking into other turbo options now as well

[RS500]

what turbo are you looking at?

[grandmasterb]

what turbo are you looking at?

Looking at viable options at them moment, would be great to get the L2 8cm but budget doesn't stretch that far at present but in no rush.

Want to match the turbo to the rest of the set up as best as possible so if that means waiting till i can afford to then so be it.

[Wheezy]

Ah ok, my kit came with the Type R 47mm gate and i'll be running the 1.5bar spring but still contemplating if i should get an EBC or tune it with the turbotech first then borrow one to see if there are any gains to warrant the extra $$$'s

Im looking into other turbo options now as well

I too have the Type R gate (I have the pro L2 Kit), however I thought it was only 42ish mm in diameter....

I might check what the catalogue says tonight (and actually check the gate when i cbf)

[raZ1911]

Whats the turbo specs? Trust TD06-l2 -20g 8cm?

If you put in some cams and some head porting could you expect 300kw?

[Wheezy]

I too have the Type R gate (I have the pro L2 Kit), however I thought it was only 42ish mm in diameter....

I might check what the catalogue says tonight (and actually check the gate when i cbf)

grandmasterb : Spec R in the kit is 42.7mm, there is also a 51 and 61mm gate and some smaller ones. (Trust 2008 catalogue)

If you want a 1bar gate spring it can be ordered VIA an autobarn or GCG (if they will deal with you direct)....

If they are not in stock Im sure they wont take more than a month from Trust.

Raz: I think some cam gear and a slightly more aggressive tune could fetch 300 easily, but would be leaning on the engine. I would personally only do it for a dyno figure and pull the tune back again

[grandmasterb]

grandmasterb : Spec R in the kit is 42.7mm, there is also a 51 and 61mm gate and some smaller ones. (Trust 2008 catalogue)

If you want a 1bar gate spring it can be ordered VIA an autobarn or GCG (if they will deal with you direct)....

If they are not in stock Im sure they wont take more than a month from Trust.

Raz: I think some cam gear and a slightly more aggressive tune could fetch 300 easily, but would be leaning on the engine. I would personally only do it for a dyno figure and pull the tune back again

Is that an Australian Trust catalogue Wheezy cause all the ones i've looked at online don't list the smallest (Type S) which is a 34mm, then there are Type R and C which are 47mm. I've just been using the GReddy US site so maybe its different???

I just ordered a new spring and gaskets from Japan as everyone i spoke to in Oz (including Autobarn) said they couldn't help me

I still cant believe the numbers Trent was able to get out of your set with only 1.2bar and no cams/cam gears, i was only aiming for 240ish with my set up

[Wheezy]

Is that an Australian Trust catalogue Wheezy cause all the ones i've looked at online don't list the smallest (Type S) which is a 34mm, then there are Type R and C which are 47mm. I've just been using the GReddy US site so maybe its different???

I just ordered a new spring and gaskets from Japan as everyone i spoke to in Oz (including Autobarn) said they couldn't help me

I still cant believe the numbers Trent was able to get out of your set with only 1.2bar and no cams/cam gears, i was only aiming for 240ish with my set up

Yup was an Aussie catalogue, they are sitting around all over my house LOL

You called the wrong autobarn's then , I can tell you who to call in VIC, SA, and QLD (I'm not sure what state your in)

we just got rid of a heap of trust parts frigging cheap.....(autobarn as a whole) GCG is the new distributer.

FYI: Trust Type-R gates (and other types IIRC) come in various sizes.

[NWR31]

i'm happy to hear yet another great result from the RB20. these sorta threads keep me motivated to support the little ripper.

who gives a shit about lag down low when you have all hell breaking loose up top!

agreed!

ive got a 535HP rated low mount internal gate turbo which will be going on my rb20.

just gotta get the rest of the parts i need, afm & injectors.

[ORIGIN]

love the performance of the Trust TD06-l2 -20g 8cm, anyone want too sell me one for my rb20??

[Wheezy]

love the performance of the Trust TD06-l2 -20g 8cm, anyone want too sell me one for my rb20??

FYI $4700 should get you the same kit as I.....

[ORIGIN]

just looking for the turbo, have majority of other parts already... decent price though