Jump to content
SAU Community

Recommended Posts

Go the SSS dude, they're good on fuel, easy to drive and best of all they stick to the ground really well! Just make sure if you get one, get the N14, all the rest suck. Go a 94 mod if you can get one for 8k, doubt it though. You can do it up a bit too, and, if you're like a mate of mine, drop a SSS turbo bluebird motor into later on... Depends what your after, but I think that the SSS is a sweet ride for a first car, the only drawback is it's FWD (no burnouts) and gets a bit crowded with 3 in the back. (only my opinion though)

They have the same engines yes but the pulsar is detuned for Aus. The SR silvia isnt faster than the CA iv driven both but if you rebuilt the CA and remapped it with a higher rev limiter it'd go harder and atm its quite easy to get a CA, bcoz of the 15 yr rule.

The SR silvia has 103kw and the CA has 97 obviously quoted from the factory. The SSS i think has 93

If you want any info on silvia's look at the silviawa website under n?a performance or the silvia aus site. Both have great info.

Only advantage the pulsar has is 4 doors, but it is also fwd and prob weighs a lil more. Its also cheaper to mod an s13.

In the end find a car for the right price in good condition.

Originally posted by Greg

thought about a toyota cressida? they're nice cars but hard to find in manual

They only came in auto, if you are talking about the last shape. Although some people have been known to do manual conversions. My friend was gonna do a 2jz swap into the cressida along with manual. Turned out to be difficult, would have been a mad sleeper (in a major way!!)

My parents have a grande. Cheap insurance, expensive parts.

I rekon get an N14.

Although i got a swift gti for my first car ( 18months ago, with the same budget.)

mmm... firstly i'd reccomened a little sihtter to thrash the arse out of for 6-12 months.

but if 8g's (maybe take it to around 9-9.5) and you can get an R31 coupe (turbo) no worries in the world.

It'd be stock, but with Zorst (800), boost (80), ECU remap - ECCS engine (500-700) then you'll be laughing if you spend 1500 on it.

Plus they handle exceptionally well.

The IRS is decent for it's age

i've had two already and i'm only 20 ;)

my thoughts are that out of those cars, the silvia or N14 you get for 8k will be pretty much a heap of shit (I'm not 100% sure on the N14 though), and guaranteed to have been thrashed. The Lancers are gutless with shithouse build quality. The celicas are kinda comfy but hell boring.

I'd look at aussie delivered R31s (not the imports) in that price range. Get a 1989/90/91 model manual and you'd have a reasonably quick, efficient and comfy car, with some space, good handling and rwd. You could probably find the "silhouette" model for your money which means LSD, 15" mags and a sporty interior.

Theres even one guy selling an aussie GTS (not to be confused with the jap one) on here for $8500, those cars were built by Nissan's special vehicles division and had bilstein suspension, the LSD, a different body kit, 16" mags, sporty interior with a momo wheel, and an extra 20 or so KW over the basic one. They are acknowledged as one of the most refined and best handling sedans to come out of the 80's. They built two different series (the car had a bodywork facelift hence second one), the first is white on white 16" rims, the second one was red on white 16" wheels and a more aggressive kit (and some extra power). They only built 200 of each, but parts are common to the basic ones so thats no problem.

My one gets 8l/100kms if you are careful and 10-13l/100 if you cane it.

just an idea.

cheers,

floody

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Good morning all, Bit of a random question but figured I’d finally throw it out after wondering for a long while. Before I start, I'm hoping to do this purely out of personal preference. I think it would look better at night, and don't mind at all spending a few hours and dollars to get it done. I've copied this from a non-Skyline specific forum, so I apologize for the explanation of our headlight switch setup that we all know. Here we go: Zero lights (switch off) Parking lights (switch position 1) being a rectangular marker on the outside of the housing, my low beam being the projector in the centre (position 2), and a high beam triggered by my turn signal stalk. Most North American cars I’ve owned of this era have power to the amber corner (turning indicator) light as part of the first switch (parking lights). I’d love to have these amber corners receive power when the headlights and parking lights are on (headlight switch), yet still blink when using the turn signal which is of course a separate switch. Hopefully I’ve explained my question correctly. Is anyone aware of a way in which I might be able to achieve this? Thanks in advance
    • My heads are cathedral port! It's likely possible, but I don't want to add any extra moving parts (I know they don't move) between the heads, manifolds, etc. It will also affect how injectors/fuel rails etc sit and I don't really know if it would change how the FAST manifold goes/sits/fits. I have the LS6 steam pipes already as I have a very late LS1 block so it should be fine. I couldn't find anyone who had ever actually used one for this purpose, it seems 100% of people grind the water pump. The thermal spacers are 12mm and are half way to the cost of the newer water pump anyhow... so if it comes to that I suppose I'd rather buy a new pump. The bearing in the pump I do have is a little.. clunky, but it hasn't done that much time and I never noticed it when the car was together in the past few years, so..
    • The bushing has failed, not all that uncommon for a car of this age.  Any mechanic should be able to push in a new bushing for you, or you can probably buy the entire lower control arm, complete with bushes.
    • Could you not use "thermal" spacers to give the clearance, like the ones I used between the blower and head? That raised the manifold height by around 10-15mm Albeit the ones I used were for cathedral ports, but I assume they have similar for rectangular ports????
    • Thanks Paul I reached out to Autotainment but they no longer work on JDM cars as the guy who used to do the work moved on and is no longer doing that kind of work. I am talking with Level Up Audio though.
×
×
  • Create New...