Front Right Drive Shaft Of A R32 Gtr

[jwah]

Does anyone know how to get this out? Ive got most of it out, just the part that bolts into the front diff seems to be hitting out on the cross member or what ever it is? seems there is a bolt you can undo but im not sure if this would be wise? I was thinking that maybe i just fit the boot with this still attatched to the diff?? I dunno, id prefer to get the whole lot out. But if someone can point me in the right direction that would be great! Cheers

[GTRsean]

Pull the shaft using a slide hammer.

When I pulled my engine, I just pulled the front diff cover off and levered the center of the shaft in the diff center.

It's held in with a round wire retaining clip that compresses when the shaft is popped out through the spline of the diff.

Hope that helps

[jwah]

Ah righto, well i have the shaft out, just that last bit that bolts to the diff housing. But i didnt realise it had a clip in it. but just seems it still wont make it out ay. Ill have another look. Dont really wanna go to the extent of taking the diff cover off haha. Thanks for the reply

Cheers

Pull the shaft using a slide hammer.

When I pulled my engine, I just pulled the front diff cover off and levered the center of the shaft in the diff center.

It's held in with a round wire retaining clip that compresses when the shaft is popped out through the spline of the diff.

Hope that helps