Jump to content
SAU Community

Recommended Posts

howdy all,

still not sure if i want four or two door 34gtt.

Is their any difference in performance ie cornering,1/4 mile ect for the this car?

has any one driven both and what did you find? the aesthetics of the 2 door are drawing me in

over the practicality of the four door plz help

2 door is so much more stylish dude .but if you got like 5 kids then yer a four door would be best.im guessing a four door would be slightly heavyer aswell

for all intents and purposes, virtually idential cars.

Other than the obvious, 4 doors vs 2 and so on

I much prefer the 4door over the 2door.

I also was looking for a 2door, then when i saw my first 4door i fell in love and grabbed it straight away!!

performance wise - they're exactly the same I felt!! same engine, same setup...

might be a touch heavier but not much at all....

the 4 door has the lame looking rear lights.... that would turn me off getting one, that and im only 20, so no kids to haul around :wave:

Thought that was only the case in 32's and 33's.

4 doors all the way, no difference in performance and from memory only about 20-30kg difference in weight. All the advantage of the extra convenience and IMHO they look far better too!

Know where there's a mint one going if you're interested...... ↓ ↓ ↓

2 door love.

I do admit I love the way the R34 sedan tail lights light up. They are different to the Coupe and it creates a nice colour/effect.

However overall I think the 2 doors are better.

20wj0.jpg

Performance would be hard to pick I gather. Never sat in the rear of a 4 door 34 to see the leg room. But the 2 doors arent unbearable

....a big back seat has lots of other good uses :D

I prefer the 4 door, there is no performance differeance, get which ever suits you

2 door style or 4 door practicality, beauty of a r32/3/4 us you can choose

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hows your intake piping? Are you still running stock? Having in the stock AFM position would mean, if the BOV was shut/venting out, it'd create the almost stalling kind of effect right // "the rich pulse behaviour" due to MAF thinking air is flowing ? But this would be better than having the bov in the stock position + MAF on/just before cross over piping right?
    • Essentially, yes. Although I wouldn't put the AFM on the crossover pipe. I'd want to put it into what amounts to the correct size tube, which is more easily done in the intercooler pipework. I bought a mount tube for card stile AFM that replaces the stock AFM - although being a cheap AliExpress knockoff, it had not flange and I had to make and weld my own. But it is the same length and diameter as the stock RB AFM, goes on my airbox, etc etc. I don't have a sick enough rig to warrant anything different, and the swap will take 5 minutes (when I finally get around to it and the injectors & the dyno tune).
    • So to summarise, the best thing to do is to move recirc to between turbo and IC, and maf on the crossover pipe. Meaning I'd need a recirc flange, drill a hole in the piping on turbo outlet area. And drill hole on crossover to fit/weld maf sensor? Either that or put the MAF on the turbo inlet right?  Is an aftermarket recirc/blowoff valve recommended? Do currently have family in Japan so could probably bring something back with maybe a cheeky lil SuperAutobacs run?
    • Yep, so far most have said that it looks like corrosion on the wall from piston not moving. Which then has probably damaged the oil rings and caused those vertical marks. The longest the engine was still after the rebuild, was the winter of 2018 - 2019, plus the boat trip to Japan. When I shipped the car, it had normal gas in the tank but before that winter pause, it had E85 in tank.  In any case, even if either one of those was the cause, it happened close to 6 years ago and the car has been driven something like 30 000kms after the fact. Again, apart from the plugs and the dip stick, there is nothing in the way the car runs that would indicate what has been going on in the engine. I am going to consult a shop and ask their opinion, what would be the best approach. I do have some access to a garage I could use to diagnose further myself, but time is very restrictive. Might end up buying another engine that could be used while this one is being remedied. Without pulling the head, it will be impossible to find out if it needs another bore, but here's to hoping a hone would suffice.  Goddamnit, I would really have preferred this not happening.  
    • Boot is going to be replaced eventually. I just wire brushed what I could and rust converted. Then painted in rust kill primer. the spoiler also got repainted and plugs replaced on the ends. The under side of the bonnet is going to be black also, currently white. But red on the top side, same colour code as the silo to begin.
×
×
  • Create New...