Jump to content
SAU Community

Recommended Posts

Need a bit of input from the members. I have a Manual R33 Coupe Series II.

I have purchased two strut braces from various seller (used).

The seller swears that they came off an R33 but they are about 50mm short overall.

Question 1. Is there a difference between the shocky towers span on the series I and the series II.

Question 2. Is the span on the R32 narrower that the R33's??

Could be I got sold R32 struts !!!

Any input welcome

Max

Link to comment
https://www.sau.com.au/forums/topic/230044-r33-front-strut-brace/
Share on other sites

Thanks for the reply, Thing is I have here two struts both said to be for the R32 , but both have different hole displacement layouts.

I believe the R33 IS wider in the span , this was advised to be by a Nissan Mechanic (whatever that means).

My email is [email protected], if you send me your email I will send you the answere when I finally get it sorted out.

I have good pictures of both these struts lying across the towers if you would like to see them.

Regards

Max

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG has not responded to my emails so far since purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
    • I would say no, why, because my daughter, who also lives in Goulburn, hasn't recommended us going there Pity, as we miss all the German joints around in Sydney, actually, the restaurants are the only thing I really miss about Sydney, and a special mention to Ishibanboshi at Bondi Junction, their Kara-age Don is heart cloggingly deliciousness (always added a special boiled egg...or 2) 😋 
×
×
  • Create New...