Jump to content
SAU Community

Recommended Posts

Heya everyone

Organising a cruise this saturday for those who live in or near sutherland shire.

If you are free come along. Got about 10-15 plus cars coming so far.

DATE: 2nd August Saturday

Time: Meet 1pm at kirawee maccas. Depart at 1.30pm

Location: Maroubra Beach

Weather seems to be clear which is a bonus :P

Edited by siddr20

shit i thought the meet was on sunday so i couldnt make it in the end..... the ironic thing was at 12:45 on saturday i was at just jap around the corner and by 1pm - 1:30pm i was at kirawee maccas for lunch anyway.... im such an idiot i thought all the skylines i was seeing was for just jap lol

i saw one 2 R34's and a R32 following at a roundabout in kirawee near just jap and a silver R33 GTS-t at maccas car park (which i nearly went to and try to open because mine is also a Silver R33 gts-t) only difference from behind was the other r33 had checker plate behind the number plate...

sorry guys if i read the instructions properly i would have come along

siddr20 that was your car lol, i just recognised it.... i think you watched me go to my car, you should have came up to me and remined me about the cruise lol

HAHAHAHHAHAHAHAHAHAHAH you idiot.. ahhahahah

nah sorry man i didnt notice you leaving.. However i did spot your car and i thought you were there for the cruise, till someone mentioned that a skyline left :banana:

Yup that was my car :P hahahahahh

Anyways pics are here: http://www.nissansilvia.com/forums/index.p...howtopic=324206

perhaps you can join us on the next cruise!!

Edited by siddr20

omg sorry but i'll definately come to the next one and my mate has a 180 aswell pushing 290kw atw so he'll like to show it off probably lol

pics are good wish i was there



  • Similar Content

  • Latest Posts

    • These are small points I should actually add to my original post. GKtech makes an extended slave line for this conversion. It's what I use, and it works well. You'll also need a CD009 slave cylinder.  S/R Chassis Z33/Z34 Conversion braided clutch line As for transmission sensors, you'll need to both extend the wiring and replace the connectors. I can't recall which is which, but one is your neutral switch and the other the reverse switch. As they are just switches, just test for continuity with your transmission in neutral or reverse to figure out which is which. Connectors:  VQ35 neutral Switch Connector | Wiring Specialties VQ35 Reverse Switch Connector | Wiring Specialties 
    • I’ll try and see it could be the release bearing. As for the 4th gear grind maybe clutch doesn’t disengage properly cause it is slightly like very slightly hard to go into first could be due to the slab cylinder pin being short uni clutch is a twin plate.   Ive attached some assembly photos hopefully you can open the link and see maybe detect what’s wrong https://share.icloud.com/photos/0dc2YvW__Hl6jl-l2_0jejjpg https://share.icloud.com/photos/09e0jkWOK-vP48c1cfY6u3ViA https://share.icloud.com/photos/0b4rDmh5R7pK7fb1VtND73a3g https://share.icloud.com/photos/05eeUi_6dC4DVi80jOUYDgb0g https://share.icloud.com/photos/06335TgY1XxyIJal_wkdQLhzw
    • Yeah for sure that is peddle adjustment 
    • What are your thoughts on this after having it for a while, worth getting?
    • Downshifts are harder on transmissions than upshifts, the input shaft naturally slows down once disconnected from the engine so the synchros aren't doing all the work. There's no "natural" tendency for an input shaft to increase RPM. Something is not right there, I don't have a great answer on what. You can try a dedicated GL4 75W90, I plan to switch to Motorcraft XT-M5-QS which is supposedly a very good 75W90 for NB Miatas which have a weirdly sensitive transmission from the factory. I would chase down why your clutch is making a hissing noise, that's not normal. It might be no big deal but in the absence of anything else to investigate I would look at that.
×
×
  • Create New...