Jump to content
SAU Community

Recommended Posts

Hi again,

I've kinda high jacked this thread, but have had this car inspected and it's come back as an extremely clean GTR.

My only concern is around the engine. The VIN has been checked again and is definately an N1 chassis. I've had the engine casting checked though and it's 05U NOT 24U, and have spoken to several people who are adamant that ALL N1's are stamped 24U.

BUT, I've also checked the engine number on the block, and this matches the number on the build plate, suggesting that it's the original engine the car left the factory with. Again this would make you believe it's an N1 stamped with 05U.

The inspector also said that there is no way the engine has been swapped as all the mounts show no sign what so ever of a swap.

Everything on the car is immaculate with the only issue found being a bit of shudder under brakes.

Logically my mind says that all of the above points to the car having an N1 engine. Would people agree?

For any other variant i wouldn't be concerned, but the main reason in my mind, paying a bit more for an N1 is for the engine.

can the engine number itself be used to check what engine it is? I've been told fast can't do this? If anyone can help the number is RB26 029655A

Thanks

Bobby

  • Replies 57
  • Created
  • Last Reply

Top Posters In This Topic

Hey dude,

I been following this forum for a few days now, and most signs point to it being an N1.

But..

If most people suggest that the engine number is incorrect it is more than likely that it is, because the odd dozen or so people that have replied to your questions dont have any intention on making money out of the sale.

Think about it that way. They are making a sale out of this, they will tell you whatever you wanna hear dude just so you fork out the 26k only so they can get a fatter wallet.

Ive worked with car dealerships, i dont like them, at all. Ive never considered buying a car from them for that exact reason. Because i know they have the money to promote, to pull strings, to make something beautiful when under the surface, whether you ever find out or not is something completely different.

If it was me, i would be careful, very careful when looking at something so rare.

I love the N1's, but i dont love dealerships and what they can do and what i have seen them do first hand.

In my opinion i would give it a miss, maybe wait a bit longer or even go with something like a V-spec or something similar, they still have all the goodies, and arent usually f**ked with to make a sale.

You still get the brembos, you have the choice of colour, still have a V-spec car which would be one of what..1400 or so ever built.

They still hold their value, still beautiful cars, with less chance in my opinion of being f**ked with to make a quick sale.

just my opinion

Whatever you do dont make a decision based on what i just said, but take it on board please?

Impound :(

Ah, but that's the problem, you see the engine number matches the build plate.

so far everything I have seen about 05U v 24U casting stamp has been what people believe to be the case.

The engine number 100% matches the build plate. and in my mind, I doubt Nissan would have built an N1 Chassis with a standard motor. It makes no sense.

Either way, the car is still an exceptional car, no doubt about it. It simply cannot be faulted. Everything is original down to the exhaust. The log books trace the cars history to present and match the speed o, so on this alone to me the car is worth it. N1 or not.

Also the yard in no way is pressuring me to believe anything. In fact they are leaving it to me to make my inquires. I asked them to check the casting numbers, and rightly so, they said we can say anything. Don't rely on us and check it all yourself. Hence my questions.

"I doubt Nissan would have built an N1 Chassis with a standard motor. It makes no sense"

Sorry to be so definite and picky on points bro, but thats the thing, if you doubt something, i dont think its a good idea, im sorry, but all i have learn with buying cars is if you doubt something it might not end well.

for instance, i know its a completely different thing, but i bought a HD Special Holden off of an elderly man who claimed it was his sisters car and she had it since new, so one owner, all the books, all the nasco accessories and so and and so forth.

turns out the car was in a big bender, had a roof chop and change done because it was creased, the panels had been replaced, and i had the RAA come and inspect the vehicle, HD collectors check it out, everything.

i only bought to sell, if i didnt find all that shit out the car would have been worth a good $20k.

but one loose nut on the guard i noticed when i looked at it originally, if i said no, it would have saved me $5k.

Also thats how dealerships will work, make you feel in control because they know that they will make a sale one way or another

Yep, can see your point, but as stated N1 or not the car itself is immaculate.

I've checked as much as possible and all panels are orginal, paint depth has been checked on all panels, no sign of any damage on the undercarriage, engine compression test has been done, and all passed with flying colours.

I have no concerns at all about the condition of the car. None.

all good dude,

sorry again to be so picky about shit, but ive worked with dealerships, ive done some dodgy dodgy shit before, so im just putting my idea's in.

i just know what can be done through dealerships, thats all im saying, if it was me i would buy an example that wasnt so sought after.

plates can be swapped, complaince plates can be dodged, anything can be made to look original, and anything can be forged.

i didnt learn how to make money at school or through legitimate business dude.

thats all i feel i have to say

'Yep, can see your point, but as stated N1 or not the car itself is immaculate"

an immaculate GTR isnt worth 25k dude.

im sorry.

but i just dont like seeing people make the same mistakes that i have before and getting excited about things and not thinking clearly about a situation.

All the best bro, all the best

See, a car is worth what someone is willing to pay.

I also think for such a rare car the asking price is not so bad. As a comparison, try and find a V-spec R32, with 60000k's, logs, in this condition, and show me it's price.

To me i have no problem paying for a car i like and know will enjoy. This car as said is also an N1 GTR, as the chassis code states. The engine matches the build plate so again points to N1.

The whole 24U casting question i have only raised as so far all i have is peoples opinions on what is an N1 and what isn't. Nothing concrete. The only "official" check done through Nissan Fast says the car is an N1.

As for not thinking clearly i have made every possible check on the car one could reasonably make. Can you suggest what I've missed?

I find it odd that you're really trying to steer me away from buying this car. You've made 4 posts on this forum only and all are telling me not to buy this car. Have you seen the car? Is there something wrong with the car in your opinion, or do you expect me to turn away from a great car (decided through numerous checks) based on a theoretical situation which may have happened to you in the past and has nothing to do with this car? I am more than happy to take on everyone's opinion, after all that's why i have been a member of this forum since it started, however as said your really not giving me any reason to doubt the quality of this particular car. Rather saying it could be this, could be that.

Believe me this is no rushed decision. I have owned and driven imports for many years, I am not some 17 year old hanging to buy their first import. I did that well over 10 years ago. And as said every reasonable check has been made on the car.

But it's all a bit futile, I have a deposit on the car, i like the car, I'll buy the car. If it turns out not to be an N1, well then I've paid a bit more than most for an immaculate R32 GTR. Something I can live with.

Cheers

Thanks guys,

I've had the car for a couple of days and it's unbelievable. In all honesty it's tighter and feels newer than the 2004 V35 I just sold.

The engine seems in great condition, and it idles a little "lumpier" than a stock GTR so i am thinking cams of some sorts. I haven't pushed it at all but it does seem to get up and go from around 4200rpm onwards.

Still has stock clutch, stock suspension, and stock exhaust.

In the wheels arches the paint seems almost as clean as the outside, so it looks like it hasn't even seen rain. Interior is faultless.

My only dilemma is do i leave it as is, and keep it as a rare untouched N1, or do i have some fun with it.

My mind is telling me not to touch it.

Thanks guys,

I've had the car for a couple of days and it's unbelievable. In all honesty it's tighter and feels newer than the 2004 V35 I just sold.

The engine seems in great condition, and it idles a little "lumpier" than a stock GTR so i am thinking cams of some sorts. I haven't pushed it at all but it does seem to get up and go from around 4200rpm onwards.

Still has stock clutch, stock suspension, and stock exhaust.

In the wheels arches the paint seems almost as clean as the outside, so it looks like it hasn't even seen rain. Interior is faultless.

My only dilemma is do i leave it as is, and keep it as a rare untouched N1, or do i have some fun with it.

My mind is telling me not to touch it.

Check the Down and Front pipes out.

R32 Down and Front pipes are quite restrictive, replace them with 3" pipes, get a high flow cat and you can leave the stock catback as it is about 3" all the way.

Maybe change those stock R33 rims to Nismo LMGT4's, get the Nismo Side skrits and Spats and leave the rest.

Cool!

Wrap her in cotton wool Bobby, the R33 rims may have been factory, maybe not? see if you can track down the nismo wheels fitted to this release of N1, if you like em, fit them, the first time I laid eyes on this glamour, it was the perfect condition and the stock body profile which kept me looking at it for hours, im sure anyone who looks at this thing in person will agree, dont touch it! as for the mechanicals, tweaking it only makes you want to explore its power more, it has great compreesion, you want it to have it that way in another 16 years! If you want something to play with I have a very tidy R32 V-spec you can also buy,you have my number,call me. anyway, good to see your happy it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • After 23 years of owning a Skyline, finally had the latch go.  Followed this guide,  works like a dream again. Great Guide 👍
    • Hi all,   I’ve got the biggest lot of problems with my R33 GTS-T   It was a freshly rebuilt 25th anniversary RB25DET (plastic cas, neo cams) probably 6 years ago now   The engine was running so well but I fkd up badly and trusted someone I’d known for 10 years that was well known around Plazmaman for his welding and fab work. I added a lovely photo of some of his previous work. Not sure why my car was worked on by whoever did this shit     I’m normally someone who would never open myself up to something like this, I still can’t believe I did it. Trusting him literally fkd it all up for me. Everything has been a struggle, like it’s almost been 6 years that’s how much I’ve just on and off been trying to work it all out.    All I wanted was a car that danced down low, like full boost from around 3~3500rpm to redline, don’t really care what power it puts down (if it ever does) but I just wanted it to be quick to get on it.    He recommended the turbo to get, I picked Hypergear but he told me to get the front 4” with a T4 and 0.68 rear housing.    I was expecting all these beautiful welds, tidy fab work and paid for it to be ready to go to a tuner when I got it back.    I got a car back that was an absolute mess, I actually couldn’t believe it was my car anymore. I don’t think you could even call what he did welds, they’re disgusting.    So I stripped everything he touched off it and with every bolt I loosened it just got worse and worse.    I covered it and literally built and finished another car in the meantime but now it’s getting to the point where I really want my Skyline back.   Its a struggle because I paid him to do all this shit because I didn’t know how to and now I’ve had to try and figure it all out omg    Please excuse the bird shit horrible welds, I’ve got my show pony car and am so beyond dealing with this car I don’t even really care at this point.    If someone told me about what he did to my car I wouldn’t have believed them but it happened to me. It was unbelievable. He went missing, my car went missing, it came back missing parts, the straight af chassis rails bore the scars of being dragged up a trailer backwards, even the sandwich plate was bent. Everything was leaking and open to whatever fell into it, rounded off/ missing bolts, power steering oil and coolant everywhere, no gaskets, parts stolen off it, even managed to damage the sump pan.   Promised me he’d finish the car, knew what it meant to me, I paid him thousands and thousands just for him to trash it. He told me he was fully licensed and insured, come to find out he’d cancelled his ABN, so obviously no insurance. I had laid up insurance on the car and would’ve been covered but I was scared they would’ve written it off or because the business was no longer trading I’d still be liable.    He was supposed to:  New fully custom mild steam pipe exhaust manifold with turbo location moved from factory position to high forward mount. (I don’t know if it is a mild steam pipe, I’ve got a funny feeling the waste gate isn’t in a very good position and I don’t think the outlets off each cylinder are equal) 4” custom stainless steel dump with external gate (he re-plumbed it) Cut and shut OEM intake manifold with throttle reposition (I ended up doing the throttle reposition) Box in pod filter (left out) New 100cel catalytic converter (pretty sure it’s there but unsure if it’s 100cel) Front mount intercooler piping fabricated to suit (all smashed up and rusty holes where he was supposed to make it look standard where fmic piping passes through. I don’t even think my front bar is going to fit 🙄) Custom 5” intake pipe from pod to turbo (didn’t come with it so had to do something to make it work with the Z32 afm)   Engine: Full cylinder head service & machining  Brand new valves Precision upgraded spring kit Engine block honed New bearings  New piston rings  New ARP conrod bolt kit New ARP head studs Cometic head gasket VRS kit   ATR43SS2 ball bearing turbo 0.68 rear housing  Turbosmart 45mm external wastegate (got delivered to the fab bloke, I’ve got no idea what spring is in it, I’m assuming the one that came pre installed) Walbro 260 fuel pump  Nismo 740cc injectors (tested to 880) Spitfire coil packs GCG FMIC RB25DET manual 5 speed 4:11 rear diff   I’ve got an Apexi Power FC in it atm, I was hoping to just get it to operating temp to make sure everything was okay before towing to a tuner but it’s over-fuelling too much. I don’t think that’s going to happen so i think I’m going to get either a Link G4 or Haltech for it. What do you guys recommend? I can’t work out the power FC so just gonna give up on that one     It’s got an exhaust leak coming from somewhere I can’t see 🙄    The fuel pressure was steady but now it like drops from 40 to 20psi randomly (noticed this yesterday)    I’ll attach pics of the shit he put on my car and the engine bay now as it sits    I really just need some help, I need a tuner in Sydney I can trust, I’d like to be with the car while it’s being tuned if possible, I know it looks terrible but unfortunately I’ve just got to put up with it for now and fix the cosmetic stuff later   Do you guys think the manifolds are going to be okay? Or do I throw the exhaust manifold and try again?   I don’t even think these combinations are going to work tbh   I know everything I fitted was rated to be able to take at least 400kW but most rated higher    If you’ve gotten this far I really really appreciate it 🙏 I don’t mind if you trash me or the car, I made a rookie error and f**k I’ve paid for it. As you’ll see 🙄  
    • From everything I’ve heard you’ll be waiting a long time for  the parts to arrive 
    • Have you looked at the workshop manual?
    • Hmm. I've gotten pretty good outcomes from talking to them about things that I've had go wrong or ideas for improvement. Have had a lot to say about the R32 FUCAs, and they have sent out some replacement parts for those, gratis, on a couple of occasions. Mind you, I have bought a couple hundreds of $ of replacement rod ends for them too!
×
×
  • Create New...