Split Dump/front Pipe Issues!

[R33Matt]

Hi,

Im just in the progress of putting on my JJR Split Dump/Front Pipe when i ran into a problem. There seems to be a bar that is running from the turbo to the motor. It is in the way of the top pipe. Can the bar be bent out the way? I can put the dump/front on by bending the bar away a little bit but its leaning on the top pipe, would this be a problem?

Thanks

[R33 S2]

im guessing its the same line that was touching mine. i bent it out of the way carefully. i have about a 2 cm clearance now. pretty sure its a aircon line. if its left touching it can burn a hole in it

[Syphon]

It's probably the water line to the turbo. Had the same problem with mine. Just bend it carefully towards the motor and all will be fine.

[WAN73D]

there has been a thread on this in the last i dunno 6 months.

to fit i bent mine a bit up and towards the engine from memory. but mine ended up getting wedged between the upper wastegate dump line and the exaust manifold cover. so i'd say mines been running pretty hot whenever i drive. saying this i've had no problem with it so far. If i can get around to it it would be preferrable to bend it so its touching nothing really.