Jump to content
SAU Community

Recommended Posts

Thought id share some pics of my new toy, its a tony kart thats been lengthened 40cm with a gsxr750 motor. I used a calliper off my lancer and a clutch mastercylinder off a silvia frontcut for the brakes with a braided line i had made up. The throttle and clutch cables also had to be made up. This is the first attempt and there are a few small things im going to change to make it better, first thing will be the gear ratio. In 3rd you let the clutch out give a bit of gas and it fries the tyres. Had some trouble getting it to run good with the short exhaust on it and the free flowing air filters it was running extremely lean on the main jet, so far we have drilled them out to 2mm but its still got some more left to go. Im thinking of putting the t25 turbo from the front cut i got on it later but gotta finish my lancer project first lol.

post-21010-1217752842_thumb.jpgpost-21010-1217752864_thumb.jpgpost-1482-1124373157.jpgpost-21010-1217752908_thumb.jpg

post-21010-1217752884_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/230753-my-new-toy/
Share on other sites

Looks awesome. a mate built one similar, they are really a bit silly, there is no way they put any power down, it will still be wheelspinning at 140km/h regardless of what gear ratio you put in it. Just be carefull, the shorrt wheelbase means that they are keen to turn around, and at 100km/h they can step out and flip in about .1 second.

Link to comment
https://www.sau.com.au/forums/topic/230753-my-new-toy/#findComment-4053704
Share on other sites

Looks pretty cool Russell, i used to have a shifter kart with a ducati 848 motor - V-twin FTW :google:

Its an interesting set up, i take it the motor is a pre 98 750 motor???

Yeah its a 93 model motor. Burnt a new set of tyres off it today and its unreal fun but tyres dont last long enough.

Where did you run your kart at?

Link to comment
https://www.sau.com.au/forums/topic/230753-my-new-toy/#findComment-4064080
Share on other sites

Yeah its a 93 model motor. Burnt a new set of tyres off it today and its unreal fun but tyres dont last long enough.

Where did you run your kart at?

:( yeah tyres dont last long when your having some fun with these things, probably one of the only downsides really.

I ran mine of a couple of karting tracks here and also took it around Baskerville (full race track) for a bit of fun as well. It did see the "occasional" street use but was always out of well established housing areas so we didn't annoy anyone :)

Gixxer kart is cool, my first shifter kart was powered by an 02 gixxer 1k motor which i sold so i could build the 848 (V-twin FTW :( )

I'll try and dig out some pics to post up :D

Link to comment
https://www.sau.com.au/forums/topic/230753-my-new-toy/#findComment-4076825
Share on other sites

hehe.. man that is seriously over powered! can I have a go?

I'm building a off road buggy with a 1.3L in it... should weigh in about 350kg (if i can keep the weight down, also depends how much i can strip off the engine!) Wont be as crazy as that little machine, but will feel like it on dirt!

Good on ya!

Edited by psi
Link to comment
https://www.sau.com.au/forums/topic/230753-my-new-toy/#findComment-4084954
Share on other sites

  • 3 weeks later...
:laugh: yeah tyres dont last long when your having some fun with these things, probably one of the only downsides really.

I ran mine of a couple of karting tracks here and also took it around Baskerville (full race track) for a bit of fun as well. It did see the "occasional" street use but was always out of well established housing areas so we didn't annoy anyone :D

Gixxer kart is cool, my first shifter kart was powered by an 02 gixxer 1k motor which i sold so i could build the 848 (V-twin FTW :P )

I'll try and dig out some pics to post up :thanks:

This is my toy that i have created.

2005 model yfz450 atv with a 2006 model zx10r engine.

ive had it to 230 kph across a paddock several times, and

also 160 kph wheelies are a breeze.

have a look on youtube under yfz10r for some vids.

so grandmasterb tell me more about the ducati 848.

im looking for that exact motor for my next quad.

where did you get one from and how much was it?

pm if u like.

post-24852-1221312175_thumb.jpg

post-24852-1221312200_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/230753-my-new-toy/#findComment-4130996
Share on other sites

This is my toy that i have created.

2005 model yfz450 atv with a 2006 model zx10r engine.

ive had it to 230 kph across a paddock several times, and

also 160 kph wheelies are a breeze.

have a look on youtube under yfz10r for some vids.

so grandmasterb tell me more about the ducati 848.

im looking for that exact motor for my next quad.

where did you get one from and how much was it?

pm if u like.

Looks like a pretty wild conversion Darren :dry:

I purchased a written off 848 to pull the motor/box out of to use from auction. I had actually one out there to bid on something else but then got crazy thoughts when i spotted it :huh:

I was lucky that no else bid on it so it only cost me $1300 which i couldn't really complain with as there were a couple of other things that i sold from the bike that were still in good condition :bunny:

Link to comment
https://www.sau.com.au/forums/topic/230753-my-new-toy/#findComment-4135589
Share on other sites

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • From there it is trickier. Ecutek seems to be one of those closed ecosystems where everyone password protects their tunes which means I either choose a tuner and can't change from them and can't make any changes myself for any reason, or I have to buy the tuning software (about $4k) and then get someone to tune from scratch (which is not simple with all the multi dimensional tables these days). Once you buy about 300 "flash points" per ECU you can get it tuned and add their "RaceROM" function which hacks extra functionality like launch control onto the ECU, and also makes extra data available for logging over CAN Not sure what I'll do there yet; I'm tempted to use one of the overseas shops that does billions of remote tunes of the platform instead of starting from scratch locally, a lot can be done online these days.
    • Can I log IAT eh? Well, can now So next thing was looking at data logging. Not straight forward because none of the motorsport displays have cracked the nissan/inifinti CAN and ECU based displays don't do g logging, lap timing, predictive laps etc.  So, I bought an Ecutek dongle from Tunehouse (Oz distributor). Even without a tune onboard that allows display and logging of about 50 parameters via Android (and presumably iOS) app. Approx 600 for the bluetooth + Usb version That gives me (pretty ugly but) functional dash display on Android And logging of these parameters I'll play around a bit over the break, but at least now I can make sure I have oil pressure when I get to some track testing.  
    • I don't know what globes/headlight connector they run, but I'd be looking for a female adapter to plug into the existing headlight on one side. Something like this https://www.ebay.com.au/itm/256017245989 Then I'd use a pair of single input, double output relays (one for low, one for high), mount them in a spare space in the fuse box if you want to to look more original (and be easier to maintain). Then 2 new power sources from the main stud in the fuse box via a fuse to each relay. Low from the headlight adapter pin triggers low relay and high from the high headlight adapter pin triggers high and low. Earth the relays and new headlight sockets and off you go. Because it triggers off the original headlight all of the dipping/hi on/high flash all still works
×
×
  • Create New...