Jump to content
SAU Community

Recommended Posts

Recently I've noticed a ticking noise sorta coming from the back left part of the engine bay. Someone told me they think its probebly noisey injectors, because when you rev it the ticking goes faster with the revving...

Would this be affecting performance, causing damage or anything else ? Should I get it fixed straight away, if so how much would it cost, roughly?

Could it possibly be something else ?

Also, how do you check to tell if the engine is running lean or rich, or is knocking and that the afm and o2 sensors are working right?

Thanks for any help !

Do search.

RB's make a lot of injector noise. Use the afore mentioned screw driver on your ear if a) you think one is nosier then the rest and b) its only just occurred.

If the noise goes away temporarily when the revs drop, after racing it, then its inj's.

Harm? If one partially drops out when your WOT @ redline, sure you could destroy a motor worst case.

Thanks for the input so far guys,

The noise is pretty consistent whether engine is cold or at temp. whether its just been raced, driven gently or just turned on.

Ive been quoted $455 to clean and service the injectors, seem fair ?

The noise is pretty consistent whether engine is cold or at temp. whether its just been raced, driven gently or just turned on.

Ive been quoted $455 to clean and service the injectors, seem fair ?

Hey,

"Raced"as in "free revved while at standstill in neutral" :) When the revs are dropping, from a "free rev" the ECU cuts the injector signal for a moment, you should be able to hear the difference.

I don't think Iv pad more then $100 to have 6 injectors cleaned and flow tested; that price must include removal / reinstall...? ouch

Edited by GeeTR
I don't think Iv pad more then $100 to have 6 injectors cleaned and flow tested; that price must include removal / reinstall...? ouch

geetr, ill check for the absence of ticking after a free rev. and if thats the case, the noise is definetly injectors.... good diagnostics.

Thanks everyone for the continued input, my babies getting a major service from a trader on here, so ill look elsewhere for a fairer priced injector cleaning.

I was told by the people who gave me a quote that they would be sonicated, which im almost certain means they would remove them. But how could they be cleaned without removing them (is that what you get for under 100 geetr?) ?

anyway, i think ive decided to let them tick for a few more months and see if it gets worse or better (unlikely).

anyway, i'm so impressed by the knowledge on this forum...

keep an eye out for more of my newbie questions....

[edit]

oh oh i got one !

can i put that crappy injector 'add to tank when you fill' cleaner you see in the servos through my rb25det ? (im leaning towards not but interested to see what people think)

Edited by Dannyism

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Also had a look at the Nissan JP website looks like the 400r has a slightly shorter ratio than than the regular V37 3.133 VS 2.937 which from a guy who has driven both 3.69 vs 4.11 ratios in the S15 is bugger all. Seems that the AUTO Z runs the same ratio as the 400R but can't find any info as to if its an open or LSD? More often than not the auto LSD is open
    • Do not replace the power steering lines with this stuff. If it's anything like the Chase Bays stuff it will leak and be worse than stock. The reason why the reservoir is on the LH/passenger side of the car is because that's just where the reservoir was most convenient to fit. Don't overthink this stuff. The intake/cold side of the engine is pretty busy on these cars. And again, the hardpipe is designed to be a janky power steering cooler. In theory you can replace it with a real power steering cooler but that's really only for track use where boiling the fluid is a distinct possibility. Start with the low pressure lines feeding the pump from the reservoir. Make sure there isn't a bunch of junk in the reservoir filter. Be careful to not get ATF all over the engine bay. I hate dealing with ATF spills, you can clean it up and the slightest crevice will still release more oil that can still drip over time. You also want to inspect for leaks before you make a mess and can't tell what happened. Most likely you have a leak somewhere that is allowing fluid out and air in. Failing that it's allowing air in but not fluid out. Only place I can really see that happening is on the low pressure side because the pump will pull a slight vacuum to draw fluid in. Everything after the pump is high pressure or lower pressure, approaching atmospheric by the time it returns to the reservoir.
    • I did a skidpan night at SMSP this week, it was much cheaper than $350. But yeah, you need to slap an LSD in that thing.  I put an OS Giken in the 370Z and it's f**king MARVELOUS even compared to Nissan's viscous LSD. So you're saying it's free now that it's a housing estate? 😂
    • Nah, the car seems to run exactly as it did prior, in saying this it does "seem" to be better down low, like more eager to rev, but that may be 100% placebo effect from intake noise But, I'm not worried about it at all, in the end it is a fairly low compression NA engine that has a well shrouded intake,  if it is getting hotter IAT I cannot notice anything negative performance wise from the seat of my pants thrashing it about on the street or sitting in traffic, so meh, car now now makes induction noise so I'm happy
    • Do you have an IAT sensor? It's worth checking it to see. You may be suprised how little gap you actually need to flood your engine with hot air. (I tape up my airbox for a reason) :p
×
×
  • Create New...