Jump to content
SAU Community

Recommended Posts

Hi Guys, I have a 94' R33 RB25 for Sale, with lots of mods..

The motor is super tough and can handle High HP.. It is a urgent sale... HKS Turbo, HKS Intercooler, HKS Fuel Pump, HKS F Con V, HKS GCC, Wiseco Forged Pistons, O-Ringed, Sard Injectors, Nismo Exedy Clutch, Greddy Boost Controller, Full Exhaust, Racing Suspension, Mp3 player w/ Sub, Splits, Amp etc etc....

Way Too Much to list...

The Motor is only 1,700K OLD!!!!! (I have all reciepts, Doco and photos of engine build)

Will consider trade + CASH on R32 GTR

Email - [email protected] for more info (full spec sheet)

Link to comment
https://www.sau.com.au/forums/topic/23098-r33-for-sale-heavily-modded/
Share on other sites

Yep, will do that ASAP..

The motor is only 1,600 Old, (WITH WARRANTY on 10psi) Its is a demon of a car.. I can email anybody interested a FULL list of mods/specs...

I was going to advertise for 36K, But I will cut the bullshit and take 30K.... This car is in ACT...

I will post pic as soon as I can.. It also comes with a full decal kit - I havent put it on yet.. But the kit look mindblowing.. There is around 50 decals in total..

Here are some more Specs

Gunmetal Metallic Grey

RB25DET Twin Cam 24 Valve Straight Six Turbo

89,268 K ( New Custom Engine 1,600 K old )

17“ Advan Racing Wheels (with Michelin tyres )

HKS GT Series Turbo

HKS Fuel pump

HKS Front mount intercooler

HKS FCON-V Pro 2.0 Computer

HKS GCC ( Fuel Control Equaliser )

HKS Turbo Timer

Nismo Exedy Heavy duty clutch ( Fully Balanced with lightened flywheel )

APEXi Hi Flow Airpod

Greddy Profec B Boost Controller ( Fully adjustable )

Greddy Adjustable Exhaust Temp & Boost Guages ( On “A” Pillar )

Greddy Type S BOV ( Fully adjustable)

Full exhaust system with large dump pipe from turbo

Aftermarket slotted rotors at front

Aftermarket suspension ( Fully adjustable )

Aftermarket fuel pressure regulator

Aftermarket Gear Knob & Stainless Skyline scuff plates

Racing Cabin Supports on Drivers Side

Electric windows, mirrors & sunroof

M-Spec Bodykit with Large GTR style wing

HICAS 4 Wheel Steering

MP3 Player, 12” Sub, Amp & 6 ½” Splits ( With remote & Modulated 10 Stack CD )

Page guard Alarm with remote engine start & central locking

Engine Work

Sard 550cc Injectors

Wiseco Forged Pistons

Conrods Shot Peened, Balanced, Crack Tested & Linished

Crankshaft Shot Peened, Balanced, Crack Tested & Linished

Block Chemically cleaned & Fully O-Ringed

All bearings, seals, gaskets, belts and bolts replaced

Note:

1. Custom engine professionally built at 87,268 KM

2. Engine capable of supporting 600HP+

3. All Receipts / Dyno sheets / documentation available

4. Engine Resprayed in Gold & New radiator fitted at 87,268 KM

5. Photos of Engine work (pistons, rods, crank etc) taken during build also available

6. Car comes with $500 worth of removable racing decals (awesome!!)

Hi Guys,

THe Turbo in the Car is a GT2540... Why such a "relativley" small turbo you may ask??? It can have a T78 strapped on the side with no worries..

I chose to Keep the HKS GT 2540, (Low Mount) as After doing a heap of research, This was he most "streetable" And this is a all round street car.. It has relativley little lag. - Also If you get pulled over - The engine Bay looks close to stock (To the average copper .... Cool!!)

I was thinking about putting a GT3040, but decided not to, It would have been heaps more powerful, but too laggy - I know a guy with a similar setup but a 3040, And by the time his turbo spools up.. Im long gone ... The Current turbo is awesome for street use.. (Whoever buys the car has the option of upgrading the turbo, if they want - The injectors, fuel pump, INTERNALS, ECU etc etc are already done..)

I Had it dynoed at the start of the year (Before the extensive internal work) and it was about 200kw at the wheels on 10psi... I have the sheet somewhere..

The GT2540 Turbo is designed for 15 - 22 psi, So on around 20psi, it should make about 270 kw at the wheels...

Thanks Bud...

I am quite keen to sell the car now.. As earlier mentioned, I will consider trade on R32/R33 GTR (With cash adjustment) or a S6 Rx7... Maybe something else exciting...

I am open to reasonable offers... ( A Dealer offered me 25K, but I am hoping for a bit higher)

C'Mon guys - The Motor is under 2,000K!!!!

www.geocities.com/r33forsale

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • OK, so all I can suggest is that - if you have all the parts, and you have all the wiring looms, and you have all the electronic modules, then....it really is just a wiring problem. You likely have a damaged wire, pin, etc, somewhere.
    • Yup, bought this bad boy and hopefully it will be ready to pickup today. Had $5 credit on top of it so it worked out really well!
    • Yeah it is really until until you get a feel for it....then it is easy. Which is no use to you really. I'd buy that torque wrench. One thing from sure, many (most?) tyre shots overtighten the f**k out of wheel nuts, so don't worry if they were tighter when you tried to take them off compared to when you do them up. I've had some crazy tight ones come back from shops, quite apart from the potential damage to the thread, I can't see a smaller person taking the wheel off on the side of the road
    • Hey mate, thread dredging hahah To answer you directly, yes I had my itbs oversized and custom butterflies etc made by EFI Hardware in Sydney back around 2017-2018 if memory serves. My setup had a vast amount of other changes too though, so no direct comparisons unfortunately. i went from oem itbs, HPI manifold and internal gate hks 2835 pro S; to 49mm itbs, cnc port matched Nismo plenum, RB25 Neo lower runner adapter hand port matched, r31house v2 Takoashi MAX equal length twin scroll manifold with twin 38mm tial gates and a FP HTA3076 with 1.01ar twin scroll real hosing. feom power Fc to a link fury wired by 12volt, r32 gtr fuel tank conversion with frenchys twin 460 / surge tabk fuel hanger combo kit, 1659cc injectors, full 4 inch turbo back stainless exhaust, Z34 6 speed, Tomei 2way with 4.3 final drive and a ton of other shit. ive posted elsewhere here with complete run down, but here's a graph from its initial tune with no boost control on, 20psi gate springs only and e85.   7542AE72-DA92-4E0B-8660-B0940FEA7F24.mov
    • On sale mate, $55. Sorted. https://www.supercheapauto.com.au/p/toolpro-toolpro-torque-wrench-1-2-drive/565734.html?utm_content=paidsearch-pmax&gad_source=1&gclid=Cj0KCQjwytS-BhCKARIsAMGJyzqYEnwWmhWf6gxTST_Nz06Gd2VePgyvL7lh6PWrQtbjXTsI6TqSCLEaAuaCEALw_wcB&gclsrc=aw.ds
×
×
  • Create New...