Jump to content
SAU Community

Recommended Posts

Cusco Strut Brace Type OS (Suit R33 / R34 GTS-T / GTT)

Cost - $250

Sell - $175 Posted.

This Product is now $245 Delivered from Nengun - http://www.nengun.com/cusco/strut-brace-type-os

**********************************

Z32 AFM - Pulled from car in perfect working order, only done about two weeks work

Sell - $200 Posted.

**********************************

R33 GTS-T Interior Wiring Loom - As far as i'm aware it hasn't been altered at all

Sell - $150 or $170 Posted.

**********************************

EBC Greenstuff Brake Pads - Brand new, never used. Suit R33 GTS-T

Cost - $500ish

Sell - $350 Posted

**********************************

R34 GTR Fuel Pump - Pulled from my R34 GTR, done around 50k of work and in perfect working order.

Sell - $150 Posted

**********************************

GTR Datalogit - Bought and used once, in brand new condition. Includes CD, Interface Box, USB to Serial Cable, Serial to Serial Cable and the original Stickers!!! Code on Item is - 0368GTR

Cost - $500

Sell - $350 Posted

http://www.fc-datalogit.co.nz/ for more info

*********************************

PM me here or Call / SMS 0419741040 (Can't always answer during work hours, will almost always reply to sms)

Pics are coming when i get my camera back later, and questions feel free to ask!

Happy to arrange pickup for Brisbane area buyers

R33 GTS-T Interior Wiring Loom - As far as i'm aware it hasn't been altered at all

Sell - $150 or $170 Posted.

Hey mate,

Is this out of a S2 gtst (passangers side airbag)? and is it a complete body loom?

R33 GTS-T Interior Wiring Loom - As far as i'm aware it hasn't been altered at all

Sell - $150 or $170 Posted.

Hey mate,

Is this out of a S2 gtst (passangers side airbag)? and is it a complete body loom?

Im pretty sure its a S2, i will check. Ill post a pic up of it to, that may help!

datalogit cant be hooked up to GTT can it?

Well i originally thought they were model specific, but the FAQ on their own website says this -

Q: When I go to place my order you ask for my car type - Does this mean I can only use it on that type of car?

A: No you can you can use a FC-Datalogit on all Power FC’s the question is just for statistics

Q: If I purchase a GTR version does this mean I can use it on a 180sx?

A: Yes

So i imagine you can use them on any vehicle as long as you have a power fc..

Im pretty sure its a S2, i will check. Ill post a pic up of it to, that may help!

Thanks mate, im keen if its complete and for a S2..

Does any one knows if the R34 GTR fuel pump will fit a R34 GTT without any further modification? ie Are the connector on the loom, mounting holes etc the same?

Also, do I need a fuel pump for my GTT if I intend to boost it up to around 1bar boost? If so, will the GTR fuel pump do it? Thanks guys. :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I'm seeing torque specs all over the place for the OUTER tie rod, but none for the INNER tie rod, where it connects to the steering rack. Even in videos, people are just tightening em up as much as they can with a wrench and that's it. Anything tightened down without torque makes me nervous. Anyone know what the spec is for it?
    • Hope you had a great time here in our tiny country.   The JDM scene we have here is quite small, it's mostly BMW, Volkswagen with burble tunes haha. But the few JDM cars we do have in the scene are pretty nice. Some of my friends drive cool s14's too. Both built engines, red one makes abt 500, blue one abt 400 i think?
    • Ye good idea , would have never thought of something like that. Might aswell do it to every pulley and the balancer while I’m there 
    • Use an LS1 or similar, via kit like Frenchy's. But.... It's probably not the alternator. It sounds like belt squeal, which would be because the pulleys are glazed. Rub every groove on the pulleys with 120 grit paper. Report back. Oh, and new belts afterwards too. The old new ones will be shitted up already.
    • Hello all I have 2 r34 sedans , one turbo one na, only recently aquired the na 34.  Man what is with these things.... My turbo 34 started sounding like a super charger, it was screaming at anything above 4000rpm , I took the alternator apart and replaced the front bearing which is the only one I think you can access and it did not fix the issue so presumably the bearing in the rear of the alternator is gone. ( diagnosed it was the alternator by taking off the aux belts one by one to figure out which pulley or bearing it was )  My friend gave me one he had lying around, Installed it , it did not squeal for maybe 500kms and now its started to squeal again briefly on startup  Recently got an na r34 and I replaced the timing belt, water pump + all the auxillirary belts. Runs amazing but it suddenly developed the same squeaking problem but significantly worse, Ive had my neighbour come down screaming at me because it was waking her up everytime I moved the car. It takes a good 2 minutes before it quietens down.  Im yet to diagnose where its coming from but im fairly sure its coming from the alternator aswell. My question isnt about how to fix it but rather where can you get a new alternator for an rb25 neo??? Ive searched everywhere but I havent been able to find a direct fit oem type replacement thats not genuine. All the automotive stores sell an oex one - BXA035 - which I picked up for cheap through a friend with staff discount , got it home only to find the connector is completelty different.... As far as im aware bxa035 is for rb20/30's and after a bit of figuring out the bxa035 has an ev14 type connector, which is tiny compared to the rb25 connector. I actually had an ev14 connector lying around which I was considering just replacing the bigger plug with to get the alternator working but the bxa035 is rated for 70amp vs the rb25 alternators are 90amp ( or so ive been told ? ) That paired along with the fact im about to install an amp + sub in the back and I have the stock sized small battery Im not sure itll do the job unless anyone has another opinion?  I know and have seen all the websites selling the ls1 alternator conversion kit but I am not going down that route, nor do I have the money to. Hopefully I can figure out how to get 2 brand new alternators for both cars. I would buy second hand which there seems to be many of but considering how common this seems to be im sure If I installed a second hand one it would start squealing in no time  Or even better if anyone knows how to fix the issue directly with the alternator itself... Any input appreciated Thank you     Link for bxa035 connector picture
×
×
  • Create New...