Jump to content
SAU Community

Recommended Posts

It's about time I got rid of some of the stuff i no longer need or use. I'd prefer to sell these bits and piece's to adelaide folk too btw. If your keen enough and happy to pay shipping then I'll sell interstate too.

1x S3 Silhouette wing , burgundy, with a very slight over spark mark. Excellent condition $120. http://www.pbase.com/image/20484690

*SOLD *1x Import GTS-R wing, Black, Bolt holes modded to suit R31 Aust version. Excellent Condition $300.

http://www.pbase.com/image/9746070

http://www.pbase.com/image/9746139

*SOLD*

4x Colour Audio Wireless Spy Camera's. Transmit upto 25 metres with clear audio and colour features. Can run from 240V or 9V battery. Battery's NOT included. Actual Camera itself is the size of a $1 coin with a 10cm extention to the 9v battery. Reviever is 2inch x 4.5inch (guessing) with a small aerial. Brand new in boxes. $600 at Jaycar, $200 from me. (and no these are not stolen) purchased from singapore. http://www.pbase.com/image/20484700

http://www.pbase.com/image/20484789

1x Radio Control Tamiya Formula 1 Car. 1/10 scale, T103 version, every hop up available, anodised motor mount, adjustable rear wing, new front suspension, Carbon rear axle, Light weight diff, adjustable centre spring, with 540 motor and Steering servo too. Servo to suit JR receiver. New UFRA "yellow" tyre's and Lola front rims. Tyrell F1 shell. All original spare parts included as well as new spur gears and diff gears too. (needs speed control and radio gear to be ready to race) $320.

http://www.pbase.com/image/20484695

http://www.pbase.com/image/20484697

1x Radio Control Plane , 2 channel (throttle and left and right) brand new never flown. $120. http://www.pbase.com/image/20484694

1x Shogun Tb400 moutain bike. Front shocks, Rarely ridden (use 2 ride 2 work 1km away but i got a car now) 26inch frame, 24 speed Shimano gear's, front and back lights. Aluminium frame very light (can lift with little finger) $250 (adelaide only) http://www.pbase.com/image/20484693

Thanks

Tim, In Adelaide

4x Colour Audio Wireless Spy Camera's. Transmit upto 25 metres with clear audio and colour features. Can run from 240V or 9V battery. Battery's NOT included. Actual Camera itself is the size of a $1 coin with a 10cm extention to the 9v battery. Reviever is 2inch x 4.5inch (guessing) with a small aerial. Brand new in boxes. $600 at Jaycar, $200 from me. (and no these are not stolen) purchased from singapore. http://www.pbase.com/image/20484700

http://www.pbase.com/image/20484789

how long does the 9v battery last??

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You can probably break everything and any point that's true. But with the "precautions" of building the entire engine and everything around it and with a solid tune I wouldn't expect that to happen right of the bat. 😛 
    • You don’t need to use full throttle all the time to break these blocks, 500kw at the wheels in more then enough to break them even with an occasional squirt. Hell I’ve seen them break under 400kw
    • A work around is to install the R35 card style AFM/MAF on the cold side of the intercooler piping and the BOV on the hot side piping. Works well, also you can combat the revs dropping by adding a bit more ignition timing on the idle ignition timing table to slow the rate of RPM drop.
    • Understood. If you dont have a ridiculous limit,  Tune, T's and P's are in check, and arent bashing it all the time and doing the due deligence for maintenance(inc oil analysis) then its pretty safe. 100% agree, let your right food control it to some extent.
    • So these external kits with the machined block for remote solenoid mount will only work on a NEO head and RB30 or RB26 bottom end   For an R33 head on a 26 bottom end the remote vct kit is to resolve RB26 manifold adaptor plates etc  IF you try to use the remote VCT on an RB30 or RB26 bottom end with an R33 head then  you can starve the cam journal??? I have one of these kits from bits I had years ago before plans changed  I don't understand how that tracks with this video   https://youtu.be/RuPiI22Mplk?feature=shared   This looks like I can run the v termite vct kit to feed the VCT on an R33 head on an RB26 bottom end?!?!?   Lol.... don't v have these problems on RB20s
×
×
  • Create New...