Jump to content
SAU Community

Recommended Posts

Hey was on ebay looking at stuff for r33's and came across this

anyone know anything about it, such as if it actually does anything, screws with your car, worth it, dodgy

just a curious finding.

http://cgi.ebay.com.au/15BHP-Chip-Nissan-M...1QQcmdZViewItem

Link to comment
https://www.sau.com.au/forums/topic/231415-15bhpcame-across-this/
Share on other sites

page doesnt work, but i can tell you anything from ebay that says it will give you 15hp is dodgy

if its what i think it is, it tells the ecu that theres colder intake temps so the ecu can run more timing, not clever.

If you want a tune, get a safc as a minimum

Edited by R34GTFOUR

LOL! Who knows what that thing does, it looks so dodgy I wouldn't go near it.

How is fuel economy increased when it tricks the ECU in thinking the car is running colder, hence need more fuel = reduced fuel economy.

No such thing as Cheap Horse Power.

  • 3 weeks later...

Hey the first two are actually based on very sound concepts :( (although on such a small scale efficiencies are minute which is why it confuses people, could work but doesnt etc.) think capacitors and water running down a drain, the third is just a joke, breaks the conservation of energy law!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That’s a beautiful setup Tao, Have u done any development with the new Turbosmart 40mm electronic straight gate, especially in this G30 configuration?
    • Let's hope that's not a copy pump either. There were so many copies of them back in the day.
    • Damn it, I was at work last night, and stayed in a room there during the storm with the car outside, but undercover, I just went downstairs and well....there was a large steel locker that has come from some place last night, it wasn't anywhere I could see yesterday, and yeap, it landed on the fraking car....of course it did..... LOL So, I'll need to take it back for paint and panel, luckily it was only the boot that took the hit, so it could have been worse Serves me right for staying at work and getting on the cans with some of the boys
    • Yeah, really happy with how it all turned out As for aftermarket lip, nah, I'm not really a fan for practically reasons on a street car that gets driven everywhere  I did have the full lower kit on my 2015 STI, but found the front lip scrapped alot, even at stock 4x4ish ride height As the NC sits now, with the lowest point of the car at 110mm, so just legal, some steep driveways and steep speed humps will still "just" scrap those little plastic OEM air dam thingies on the undertray just before the front wheels
    • Here's one I help build and tuned a decade ago, Garrett  GTX3071R Gen 1, T3 twin scroll 0.83 rear housing. Went from larger 272 cams down to smaller Tomei Poncams to help with the low end. S13 non VCT motor. Car was purpose built for the track, hence low down was the focus. Note the actual dyno chart shows lower boost, however the EBC and boost gauge showed 1.9Bar (Ignore the torque, I was young and didn't know how to set derived torque)  
×
×
  • Create New...