Jump to content
SAU Community

Recommended Posts

need sum help guys i done a rb25 conversion got the engine to run pulled it out and painted my car. i refitted the 25 and it just cranks over and ive got no spark or injector pulse. ive tried different cas, ecus and replaced the ignitor module. ive check continuity on all the ecu pin outs. ive check every sensor for power and earth and still not a thing any ideas? its starting to really shit me

Link to comment
https://www.sau.com.au/forums/topic/231437-rb25det-wont-start/
Share on other sites

if you are getting power to the injectors and coils i'd be making sure a pin hasn't backed out of a plug somwhere. other then that you've replaced everything that could cause it. double check all the power supplies at your computer again and check if you are getting a pulse on the injector outputs.

Unplug EVERYTHING (and I mean EVERYTHING)

THEN, Plug it all back in.

Seriously, don't just do one or two plugs, do EVERY SINGLE plug.

You'll find you've left one plug out, or a relay out, or a fuse.

When you redo it, it'll all be sweet.

  • 4 weeks later...

I had the exact same symptomes as you except my car left me stranded 2 hours from home. Parked it and it wouldn't start. It would crank and crank, but not even a sputter. My MAF was working properly and I was getting fuel because I could smell it. After checking every plug, nothing got it to work. I replaced the ignitor module with a known good one, still didn't fire at all. Went to check for spark and as we were checking, for spark with 3 of the coils pulled and the other 3 on the engine, the engine tried to start with 3 cylinders firing and the one plug out was sparking too. Turned out that somehow the power was getting grounded before the coils or wasn't getting grounded at all. After inspection, I still couldn't find anything wrong with the coilpack harness, but it started up and drove all the way home without issue. Totally pissed me off mostly because there was "nothing wrong". Readjust the coilpack harness and confirm the ground loop on the rear coilpack assembly bolt. At least it's free! :(

Edited by Darius

have you checked the two basic things?

fuel and spark?

Are the injectors opening, get the special injector bulb that clips into the injector plug and crank it over, make sure the light pulses (proving that you are getting both constant power and signal to the injectors)

Check the fuel pump is actually priming the rail, undo the fuel line and turn the car onto the on position and physically watch fuel come out.

Take out a coil, with the spark plug still in it, earth the plug out and crank the car over to make sure there definately is a strong spark.

If its got fuel and spark there should be atleast a kick out of it

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Oh, that's grim. Something bad has been happening there.
    • Put an endoscope down the hole and saw this. Not quite all around the bore but a good 60% at least. Chin to the chest and towards further disappointments I guess.
    • 2 does "sort of" applies, maybe......but looking at what parts would be needed for the swap to get engineered, registered, and insured, and basically that's everything under the car, the modifications the make it legal would be problematic and horrendously expensive, all for a street car that just cruises around and hits a few twisty roads on the weekends Also, from looking at the NSW rules and Regs, with all modifications that is required just to make the car safe and not twist itself to pieces, and then actually get registered for street use, may still be impossible nowadays As for 1, when you add in a fresh engine, fresh transmission, rear cradle and diff, tailshaft, suspension, brakes, cooling, and all the other fabrication required, your probably looking at up to $100k to do it right, all for a 20 year old MX5 that is over engineered and you would never be able to actually use the power it has on the street, much like your beastie, which I love, but you actually track that thing and can use all of its powers in anger, in a safe environment  Hell, the old Bogan Cruise Ship had more power than I could use on the street, and in hindsight, I went a bit silly on that thing, it didn't really need the 500hp it had for what I actually used the car for, it was fun, but basically unusable on the street if you value your licence  As for cams, yeah, I'll probably book it in for them to get installed and tuned soonish, like next month after MX5 Mania are back at work....... and yes, I've already sent a email to bin the turbo quote and quote instead to install cams and a new Fluidampr balancer that will suit the 2.5 better than the OEM 2.0 balancer that is swapped over for the 2.5 install, as the balancer needs to get pulled to time the cams it's a while your in there sort of thing I did think a bit about flex fuel for a laugh, but being na, and no where really around locally anymore to get E85, I've binned that idea, so no sweet sweet corn smells are set for the car I wish E85 was more of a standard fuel, it's better for the environment, better for tuning, plus that sweet sweet smell we all love As for fitting in the family, that's not needed, as everyone in the family already owns a car that can seat 5 humans comfortably enough, the MX5 is "my toy" As for buying a car that is already built, nah, I would rather pick and choose my parts, I enjoy the process, and in the big picture, the additional cost is well worth the enjoyment, and the occasional frustration, I get out of doing it, albeit with other people spinning the spanners, and me, just paying the invoice 🤣
    • Excuse me, but 2) does apply 1) Would also apply if you consider how much is spent in the alternatives. Also there's the option of 3), buy one pre-built that you can put your family in (it's me, it's my car)   That said, I went on a ~500km drive the other day. I didn't use anything more adventurous than 3rd/4th gear at about ~3000RPM and 50% throttle and I was going as fast as anyone has any sense doing on a public road, with enough grip to the point where I didn't want to go any faster. I was obviously under the limit of the current car etc etc. MX5 with 2.5 N/A to achieve the same speed would be more fun for any road scenario. Maybe consider cams. I wouldn't boost it. The use case is just not there and it won't actually make the car more enjoyable unless you really do plan on wringing gears from 1st to 3rd (at least) at 100% WOT on a public road to 150+kmh.
    • Great if: 1. You had all of the money for everything else that is required  2. Lived in a country where you could actually do this and drive it legally on the road Sadly, neither applies to me As for the turbo, I am having second thoughts, mainly for engineering/registration legality reasons and insurance  Not saying I've finished doing stupid things that I probably should do to the MX5, but boost, and V8 engine swaps isn't on the cards Strange, but true 
×
×
  • Create New...