Jump to content
SAU Community

Recommended Posts

Item: Mines stainless steel dump pipes

Age: Used

Condition: Excellent

Price: 600 ONO

To Fit: (What car) RB26DETT

Location: Gold Coast

Contact: PM

Comments: Will post pictures and measurement tonight. Very rare and expensive RRP with proven power gain. Good for 400+rwkw

Item: Mines Front Pipe Pro Stainless with black ceramocoat

Age: Used

Condition: Excellent.

Price: 700 ONO

To Fit: (What car) RB26DETT

Location: Gold Coast

Contact: PM

Comments: Awesome sound. This pipe has 2x 70mm outlets combined into the single 80mm outlet. http://www.rhdjapan.com/jdm-low/MINE-s-Fro...line-GT-R-11747

Mines Motorsport badge was removed by ceramic coating place for optimal coating :happy:

Item: Custom dump pipe for greddy turbo with ceramic coat

Age: Used

Condition: Has black ceramic coat

Price: 250

To Fit: (What car) RB26DETT

Location: Gold Coast

Contact: PM

Comments: These pipes were used with the Mines extension pipes when my high flow N1's were replaced with the Greddy T517z's. They were made specifically for the Greddy turbo to accommodate for the reverse wastegate swing. They were good enough for 400+rwkw on a RB26

Will post pictures asap

All PMs replied.

The Mines dumps are still available.

I am still waiting for reply from R34kid on the Mines Pro front pipe.

The custom dump is on hold atm

If you check the cost for ceramocoat you will realise that I my asking price are ridiculously low lol

I am on leave from work at the moment and I am just keen to clear some of these stuffs out of my shed

Sorry guys been flat out at work,

can you please post up a pic of the underneath of the front pipe also. I will check again on here first thing tomorrow morning, as long as it is not bashed at all underneath I will flick you through an offer.

Also can you confirm that the longer of the two pipes, the one that goes to the front turbo is not dented behind the other pipe, it could just be a shadow on the pic

BTW I got a quote for the coating at $125 from Jet Hot.

cheers

Edited by R34kid

R34kid, that quote is really cheap. I just coated my other dump pipes by Competition Coating in QLD and the coating for those 2 short pipes costed $280 :(

I will take some mores pics tonight. The above setup were big enough to flow 2 largest low mount Greddy turbo on a stroked RB engine so I wouldn't worry about restriction :P

I am uploading more pictures of the front pipe now. That black thing on the picture is a shadow as I took the picture late last night. There isn't any dent around there. There is small dent on the under side but is only minimal and is expected for a lowered car :D You will see in the pics shortly. Overall the pipe is still in good nick. It's has a 20cmx8cm pipe and two 80cm by 7cm tuned pipes. R34kid, if you can still get both side black ceramocoat for $125 please let me know so I can send stuffs to Jet Hot for coating in the future.

Edited by 9krpm
wow that is nasty, Jet Hot said $60 per metre at 80mm diametre, for black ceramocoat - they also do stainless finish ceramocoat which would be pretty sweet

hmmm that is a really good price for heat coating. Thanks for the referral :P

So, do the mines dumps fit a pair of T517z's or was that only the custom ones you had?

The Mines dump pipes were designed for Garrett turbo. As far as I know they don't have dumps for Greddy. You will either have to use the Greddy or custom because the Greddy wastegate hinge is on the reverse side of the Garrett.

I am selling a set of T517 so the custom dump is reserved for the turbo buyer. If the buyer refused to take the offer then it's available on the market. Sorry for any confusion.

All good, no confusion... I just thought it might have been an option before i go buy a pair of tomei dumps instead, or nismoids's trust split front pipes.

All good, no confusion... I just thought it might have been an option before i go buy a pair of tomei dumps instead, or nismoids's trust split front pipes.

If you have trust turbo, the tomei dumps won't fit either.

Sorry correction, they all fit but the back of the dump will get in the way of the waste gates. So they may not open fully or get jammed up on the dump :~

Edited by 9krpm
  • 4 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • from an old insurance company i was with (Budget Direct) I had someone roll back into me at the lights got them to pull over. Got a picture of thier licence with address, had a dash cam video and, thier phone number. But only had 3rd party on the shitbox i was driving. insurance did nothing, cops wouldn't do anything due to the value of the damage (under $3000) so i just had to suck it up and go to U Pull It. 
    • Small Update on the Exhaust Situation A 200-cell cat was a bit too expensive for now, so I had the exhaust shop fabricate a new exhaust from the cat to the rear and an exhaust tip. I went this route to avoid cutting into the original exhaust and keep it intact. It’s essentially straight-piped, and the sound is noticeably different. The exhaust tip came with a silencer, so if it gets too loud, I can easily install it to tone things down slightly. Right now, the car bangs and pops like crazy -- which I personally love. In the future, I might add a resonator or a 200-cell cat, as niZmO_Man suggested, but for now, I’m really happy with how it turned out.  
    • And that's a massive problem, because deadshits will deadshit and give you false details. At least in these days of mobile cameraphones, it is trivial to take photos of any ID they are carrying at the same time as the 300 photo extensive documentation of the state of the vehicles that I recommend even for minor incidents. And you get photos of the person's face, any visible tatoos, etc etc, while you're at it. Then you try to avoid mentioning that you're fully capable of making explosives of various power levels and will wreck their shit if you are forced to hunt them down.
    • No, I don't remember the exact reasoning (was 20 years ago!) but the cops didn't end up supplying it to us either. Actually my mother went through a similar thing recently where she was hit when stationary, flustered and didn't get address (she got plate details, name, phone and insurance company, but not address). Person who hit her blocked her number and their insurance company (naturally) would not provide any details. Her insurance company also required her to pay the at fault premium because she did not have the address, cops did not help as it is a minor civil matter (they said their only course was if the other driver had left the scene of the accident without providing any details). She only ended up getting that refunded because they happened to be insured with Suncorp and she was with APIA so same company owners. For some reason the address is critical in insurance companies recovering money from the at fault party
    • If you're driving something like an R32 through to R34, no chance of meeting Euro4. Euro4 came out in 2006, and car manufacturers back then were complaining how hard it would be to meet those regulations. Not a chance a vehicle 10 years earlier is going to be compliant.
×
×
  • Create New...