Jump to content
SAU Community

Recommended Posts

  • Replies 69
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Tomei Poncams = Sold

HKS Manifolds = Sold

HKS Dumps = Sold

Std Head = Sold

Sard 700cc Injectors = Sold

Std Fuel Rail = Sold

Sump/Diff = Sold

Endless Brake Stopper = Sold

Nismo Fuel Regulator = Sold

Greddy Clear Timing Cover = Sold

Apexi PowerFC = Sold

Tomei Adustable Cam Pulleys = Sold

Short Shifter = Sold

RB26 Plenum + Throttles = Sold

RB26 Cam Covers Set = Sold

HKS2530's = Sold

On Hold:

AVC-R

Still available:

Full Exhaust (front+dump+cat-back) - $500 (pickup only)

90mm FMIC - $250 (pickup only)

Apexi Super Suction Kit 80mm - $270

Nismo Low Temp Thermostat - $45

RB26 Block 87mm Bored, Honed, Line Bored, Cleaned, Painted = $450 (pickup only)

Z32 80mm AFM's with plugs - $450

Bendix Ultimate Front Brake Pads (less than 200km usage) = $50

RB30 S2 Block = $50 (pickup only)

Also have a '94 GTR Gearbox that has a broken bellhousing (although I have another bellhousing for it just needs to be bolted on) it also needs a new clutch fork etc etc for $300 pickup only.

Also have lots of little hoses and lines and factory parts from the engine especially on the intake side underneath the plenum.

Tomei Poncams = Sold

HKS Manifolds = Sold

HKS Dumps = Sold

Std Head = Sold

Sard 700cc Injectors = Sold

Std Fuel Rail = Sold

Sump/Diff = Sold

Endless Brake Stopper = Sold

Nismo Fuel Regulator = Sold

Greddy Clear Timing Cover = Sold

Apexi PowerFC = Sold

Tomei Adustable Cam Pulleys = Sold

Short Shifter = Sold

RB26 Plenum + Throttles = Sold

RB26 Cam Covers Set = Sold

HKS2530's = Sold

AVC-R = Sold

Gearbox = Sold

Nismo Gear Knob = Sold

On Hold:

FMIC

Still available:

Full Exhaust (front+dump+cat-back) - $500 (pickup only)

Apexi Super Suction Kit 80mm - $270

Nismo Low Temp Thermostat - $45

RB26 Block 87mm Bored, Honed, Line Bored, Cleaned, Painted = $450 (pickup only)

2x Z32 80mm AFM's with plugs - $450

Bendix Ultimate Front Brake Pads (less than 200km usage) = $50

RB30 S2 Block = $50 (pickup only)

Tomei Poncams = Sold

HKS Manifolds = Sold

HKS Dumps = Sold

Std Head = Sold

Sard 700cc Injectors = Sold

Std Fuel Rail = Sold

Sump/Diff = Sold

Endless Brake Stopper = Sold

Nismo Fuel Regulator = Sold

Greddy Clear Timing Cover = Sold

Apexi PowerFC = Sold

Tomei Adustable Cam Pulleys = Sold

Short Shifter = Sold

RB26 Plenum + Throttles = Sold

RB26 Cam Covers Set = Sold

HKS2530's = Sold

AVC-R = Sold

Gearbox = Sold

Nismo Gear Knob = Sold

Nismo Low Temp Thermostat = Sold

On Hold:

FMIC

Still available:

Chromed Standard Turbo Covers - $75

post-1296-1220679835_thumb.jpg

Full Exhaust (front+dump+cat-back) - $500 (pickup only)

post-1296-1220679691_thumb.jpg

Apexi Super Suction Kit 80mm - $270

post-1296-1220679721_thumb.jpg

RB26 Block 87mm Bored, Honed, Line Bored, Cleaned, Painted = $450 (pickup only)

post-1296-1220679763_thumb.jpg

2x Z32 80mm AFM's with plugs - $430post-1296-1220680097_thumb.jpg

Bendix Ultimate Front Brake Pads (less than 200km usage) = $50

RB30 S2 Block = $50 (pickup only)

  • 2 weeks later...

The frontpipes section + cat was already on the car when I bought it, I believe the brand was Do-Luck and is twin 75mm (bolted straight up to my HKS Dump pipes).

The cat-back section I had custom made by a local exhaust shop ($1000) because the original Do-Luck cat-back used to scrape, drone and was very loud. It is now 85mm with twin hitech mufflers with a 95mm tip and sits much higher (on the factory mount points) with absolutely no drone and is not loud (cops had no issues with it).

Edited by benm

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
    • Sounds good, we will aim to be there! @The Bogan I'll give you a shout if you are heading up to campbelltown for the meet too.
    • Before I get to the test day, just to finish off the android head unit. This is a demo from car start up....the standard/host system takes a few seconds to boot (same as all v37) but Android comes up quickly. In this vid I'm using the delivered launcher but have set the default to Agami since which is easier to navigate when if use primarily 5 apps. You can see the host system still takes over when required eg putting it in reverse, and you can switch between Android and not by holding the back button 3 sec. It is pretty responsive (fast) but you can see I had to press harder than expected a couple of times.  I still have the phone connected to the stock system, and that also seamlessly takes over Android music playing. v37-android-demo.mp4 The bigger reason that I put this in though is so that I can use Ecutek directly on the head unit. That gives me a dash with logging (up to 20MB only), high and low value warnings on any parameter etc etc. I've run a USB cable from the Ecutek OBD dongle to a USB input on the unit, easy. v37-ecutek-demo.mp4   The unit did freeze on the launcher the other day, I think Agami was trying to verify the license when it didn't have a data connection...will monitor and report back if there are any other problems but so far I'm very happy with the upgrade.
    • Nah that is just crappy GPS mapping, I did have a small excursion (cold tyres, damp track, surprise!), will post up that when I get a chance.
×
×
  • Create New...