Jump to content
SAU Community

Help me please :~(

Disciple

By Disciple,
in Car Audio & Electrical

 Share

Recommended Posts

Disciple Contributor

Disciple

Posted
Posted

Hey guys,

Ever since i got a second amp put in to power my crossovers at the front, the whole system seemed abit softer (no more window shaking bass) so i figured the installers tuned the amplifier(boss 1000watt *cheap shit*) powering my sub and 6x9's. I tried tuning the gains and frequencies to get it back to what it was, but when i cranked it past half volume, the sub sounds fluttery.. a VERY bad sound.. :P ive tried tuning it by slowly cranking it up, but it sounds shit no matter wot i do, any suggestions? my sub stuffed? it sounds fine on lower volumes.. but as soon as i crank it past half volume, it starts to sound very bad :D

Thanks in advance!

Link to comment
https://www.sau.com.au/forums/topic/23219-help-me-please-~/
Share on other sites
Fhrx Rising Star

Fhrx

Posted
Posted

Where are you based? Often it is easier to come out armed with a multimeter and good ear to diagnose things like this, rather than write back and forth for three pages.

You want to meet up somewhere so I can look over the system for you and diagnose the problem?

We don't charge anything for just diagnosing either before you ask. :P

Link to comment
https://www.sau.com.au/forums/topic/23219-help-me-please-~/#findComment-497724
Share on other sites
Disciple Contributor

Disciple

Posted
  • Author
Posted
Originally posted by Fhrx

Where are you based? Often it is easier to come out armed with a multimeter and good ear to diagnose things like this, rather than write back and forth for three pages.

You want to meet up somewhere so I can look over the system for you and diagnose the problem?

We don't charge anything for just diagnosing either before you ask. ;)

im in the bankstown area, although im willing to travel anywhere, now my kenwood 500watt amp cut out.. ive checked all the wireing, im a total idiot at stuff like thsi :D

Link to comment
https://www.sau.com.au/forums/topic/23219-help-me-please-~/#findComment-498093
Share on other sites
Nav2k Community Regular

Nav2k

Posted
Posted

who installed it?

sounds like the power cables too small and so is the ground cable.

not giving it enough power

ur sharing the power between both the amps, before u were just doing it with the one amp

happened with my install, i had 4GA powering to a 400RMS amp, i installed another 400RMS amp, but instead of upgrading cabling, just chucked another 4GA from the battery down.

u may want to upgrade power cables or do it like i did.

i think that should fix ur problem

Link to comment
https://www.sau.com.au/forums/topic/23219-help-me-please-~/#findComment-507276
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Milkmun
      S15 Spec R

      By Milkmun · Posted

      Wow that's a steal, you've done well there. 
    • trey318
      r34 gtt led globes

      By trey318 · Posted

      Exterior LEDs R34 2Dr R34 4Dr Position Lamp T10 T10 Winker front T20S T20S side T10 T10 rear T20S S25S150 Anti-hyfla relay TYPE3 TYPE3 tail T10 T20W Stop Lamps T20W T20W High Mount T16 T16 back T16 T20S number T10 T10 trunk T10 T10 Interior LED Item No.     Map Lamp BA9S single-sided     Room Lamps T10×31     Trunk Lamp T10     meter Early T6.5 pedestal     final T6.5 pedestal     NISMO T6.5 pedestal     Liquid crystal section T6.5 pedestal     Winker T6.5 pedestal     High Beam T6.5 pedestal     3 SERIES METER Early T6.5 pedestal     final T6.5 pedestal     NISMO T6.5 pedestal     air conditioner Early Liquid Crystal T3     Late LCD T4.2 Short     button T4.2 Middle     Hazard SW T3 Pedestal Short     Keyring T5     Cigar Socket T5
    • KyoyaR33
      Rebuilt Rb25det issues

      By KyoyaR33 · Posted

      Howdy all,   I had my rb25det S2 rebuilt and finally started it today but have run into a few issues  Engine sounds like a a diesel easiest way to summarise like small ticking, gets louder when revs are slightly adjusted  The engine builder repainted the engine cover leaving no where for me to go off with lining up the CAS so have it as central as possible so not sure it that could be affecting it?, changed the gearbox fluid too but won’t seem to go into gear when running, and only 1 to 4 when off having a hard time finding 5th and reverse anyone got any ideas or a base for me to start off? much appreciated 
    • GTSBoy
      Neil's R33 Gts-t Build

      By GTSBoy · Posted

      Well, no. It's an 023, which is pretty similar to an 040. Although it is hard to tell from the specs, as given.
    • GTSBoy
      My R32 Money Pit & The Headaches That Come With It

      By GTSBoy · Posted

      Hmm. Maybe the (other thing I forgot about!) Haltech removes at least some, if not all, of the problem I described. I guess there is still the possibility of getting it wrong if the AC is set up/wired up for the Haltech as if it was in an R34 (simply because it's on a Neo), and that's playing foul with the R32 AC computer.
×
×
  • Create New...