Jump to content
SAU Community

Recommended Posts

Hi,

I'm starting this thread for anyone that is interested in seeing the results before and after auto to manual conversion. I have 3 sets of results taken at different stages over the last year.

1st off is the dyno results as an auto, using 96 octane petrol

Mods to the car

K & N panel air filter

Extractors (6,2,1)

2 1/2" exhaust straight from the extractors (no Cat)

Link to comment
https://www.sau.com.au/forums/topic/23239-dyno-results-b4-and-after-conversion/
Share on other sites

2nd dyno, was done shortly after the manual conversion (4th gear dyno), still running the auto diff, 96 petrol + Nulon pro strength octane booster (Note; low torque figures at the wheels) 16kw increase at the rear wheels:D

3rd dyno was taken today, running a 4:3.1 ratio LSD diff, using 98 octane petrol and nulon pro strength octane booster.

Unfortunatly I have lost a few kw somewhere, but gained another 175Nm of torque at the wheels:D

Both dynos run after the conversion were done still using the old auto ECU.

Originally posted by OverDriver

u didnt use the octane on the first?

how much of an improvement is that stuff?

Opps, yeah I did but a different brand, think it was 108+ octane booster (black bottle).

To be honest I don't really know if the octane booster, makes that much difference. I can't really feel any power increase over using BP ultimate. I think each car is a little different in the way it responds, some people swear by it.

Originally posted by Greg

about the 4:3.1 ratio LSD diff you put on, is that the standard diff that comes on manual GTS25's?? (ie the same diff i would have)

It wasn't a R33 GTS25 diff, it was off another Nissan thou. Every thing was the same except the plate on the back of the diff(different sized mounting), we just swaped the plates over and it fitted. I believe the ratio shoud be the same.

I red somewhere that when a car is auto, the torque converter somehow doubles the figures. If I could only remember the site, it was quite interesting.

Originally posted by Greg

interesting that it had heaps more torque when it was auto, wonder why....?

Ok found the site explaining why, Have alook at www.howstuffworks.com just look up torque converters in the auto section.

thanks skyla that was a very intersting read. it backs up what your dyno results showed us: with an auto you get more torque but less power.

btw, you made a little typo in your link, this should work :stupid:http://auto.howstuffworks.com/torque-converter.htm

of course holdens are gonna have more rwkw's as there a bigger heavier car, but yes our na liners will beat v6 commies and straight 6 vct vvt and non vvt fords i know this from expierience.

Ive got a na skyline and have had a bit of work done to the engine. First thing was the throttle body with a bigger butterfly.

Extractors with full 2 1/2 exhaust. Air Filter and had it dyno tuned with a piggy bak on the ecu. I have now got 137.5kw at the wheels. Pretty good, kills V6 commodores and falcons easy.

Hey Nick,

A few questions about your throttle body, I'm looking at getting mine done in the not too distant future, Just got to get a problem sorted first.

Did you get your factory TB and intake plenium bored out, if so how many mm did you get removed, or was the TB from a different car?

Yeh, a bit more profromance with the bigger butterfly. Also there is two mesh round circles in the pipe in the air box. Take this out they also ad little power. Better air flow. Na didn't get canaried sat nite. The dumb cop was going to give me one for my driving light on the series two bumper. They dont work because there not hookt up. He reckons if you have driving light they must work.

What about the fake tail lights on the new nissan patrol. He left me alone after that.lol.

I have also been told you can use a 300sx TB as long as you duno tune the car after doing so.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If you are fine with China turbos, Maxpeedingrods makes a bolt on turbo. Ive had mine for two summers now and it seems to be holding up ok. 
    • Howdy all Im in a little predicament and wondering what everyone’s thoughts are? I’ve had my long block rebuilt and am in the market for a turbo due to my old one having metal shavings from crank bearings (cause of rebuild) go throughout the turbos oil lines and there wheel has a little play. I’m not really aiming for any power, just trying to keep it as oem as possible, but I can’t find a turbo that’s built for the stock ecu or find something that would be a standard replacement. Anyone have any ideas or suggestions 
    • How's everyone going? Just a shout-out introducing myself. I'm James, I live on the north side of Brisbane. I bought an R33 that had been left to rot in someone's front yard for 14 years. Apparently, it has immobiliser/fuel issues. Long story short, it's suffering from a seized engine, plus whatever else turns up once it runs. The car is pretty good considering it sat for so long. It pretty much died after being imported. It has a bunch of Jap parts and a full Top Secret body kit. It's painted Fiat Turchese Festival, or aqua blue if you're not French. Another project to throw money at!
    • So the clockspring is responsible for the indicators cancelling on their own? I thought that was the function of that white thing in the center (any idea what it's called?)
    • Can you log IAT? Whilst WTA coolers have their place, doing any sort of sustained run is not one of them There are fixes that slow down the heat soak, like ice boxes, which don't last that long, and interchillers, which are fairly expensive, up grades to the WTA cooling radiator, which may require a bigger pump, and upgrades to the reservoir size,  and upgrades to the cooling fans, but, it all still heat soaks, and takes ages to come down in hot weather  For a turbo, that isn't locked into WTA like my PD blower is, can you not possibly swap to a nice air to air intercooler????, it would be better for sustained runs then, and have alot less things that could go wrong in my opinion 
×
×
  • Create New...