Jump to content
SAU Community

Recommended Posts

Hi all,

I'm looking at buying a 260RS, I've been away from Oz for 3 years and I'll be coming back soon and have always wanted a Stagea.

I owned a S15 200sx before leaving.

I'd like to get a 260 and would like to hear any thoughts on things to check to get an authentic 260rs.

Have you seen, heard of dodgy 260's? I did some searching in the forum and read the buying guide already.

Feel free to PM me, cheers.

Burjo

Link to comment
https://www.sau.com.au/forums/topic/232498-260rs-buying-tips/
Share on other sites

just run the VIN through Nissan FAST beforehand, you can PM me the VIN to check if you want when you find. Doubt if there would be any fakes out there, 260s are not that expensive anymore and the cost of faking one would be more than a real one.

just run the VIN through Nissan FAST beforehand, you can PM me the VIN to check if you want when you find. Doubt if there would be any fakes out there, 260s are not that expensive anymore and the cost of faking one would be more than a real one.

Thanks for the reply.

If its as easy as checking the VIN then that's fine.

Your right about the price of faking it.

Thanks again :thumbsup:

Make sure you get the engine checked. Do a compression check and leak down test, esp on a 10+ year old Rb26. Could save you thousands in the long run.

Also, check the VIN to be sure, I know of one black fake with twin sunroofs. . . . . .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes...but look at the numbers. There is a tiny tiny fraction of the number of Joules available, compared to what is used/needed. Just because things are "possible" doesn't make them meaningful.
    • Thanks for taking the time to post that ! If anything changes or happens please do update us. 
    • Somehow Vertimass/Oak Ridge National Labs has figured out a catalyst that can convert ethanol into C9-C10 hydrocarbons in basically a single step without ending up with a bunch of ethylene or similar waste products: https://patents.google.com/patent/WO2023224867A1/en I still don't think anything like this will keep us from needing to transition to EVs regardless along with all kinds of other electrification, but things like this will go a long way towards alleviating the problem of how to electrify things like planes. Renewable diesel is seemingly an easier problem as well, Chevron is already running refineries for the stuff and the primary feedstock is tallow and other waste fats from agriculture.
    • Ok so I have sorted everything with my uniclutch and  i can offer up a bit of feedback and some things that might help others.    I found problems with factory damper line. Weird shit and had trouble with peddle adjustment    I used this https://au.gktech.com/products/r33-gts-t-skyline-braided-clutch-line?_pos=2&_sid=22b01b9b9&_ss=r Also when adjusting peddle leave a bit of play. You can get into a over stroke condition easy.. Make sure you can push the slave forward after adjusting to confirm fluid can return to master then you will need to pump it up heaps…..not sure why but that’s how it is.    last thing the splined adapter is machined perfectly. If your input shaft is old like mine was I would put a bit of valve grinding paste on it and stroke it like a 15 year old. Just to give it a tad more clearance and to better match it to the spline.    reason is on a near flat shift I have had situation where the peddle returns a millisecond after you lift from the clutch. No slip or anything but I reckon this is due to tolerance on the spline being way tighter than stock clutch and binding for a sec. I think this will go away but also my spline was old. Box is old so I guess I should have checked better. It’s a super neat fit.    it feels light as and holds awesome without any noise    
    • My Fuga Hybrid is JDM, 2014 model but very similar to the V37 from the looks of things..same platform just physically larger and very comfortab;e
×
×
  • Create New...