Jump to content
SAU Community

Recommended Posts

As topic says, cleaning out my shed as I am about to move, so if i can help it, don't want to move everything, especially since I am not using most of it

So here it goes:

Car Parts:

Adjustable Rear Toe Arms

To suit r32, s13, most nissans i think

brand new, never used. no longer needed

$150

R33 Wheels and shagged tyres x 2

No longer needed. Tyres have camber wear

$80 pair only

3 inch decat pipe

Came with the car. Not the prettiest thing, but if you want to get rid of your cat, this will do it

$50

turbosmart rb20 blow off valve adapter

have rb25 now, so no longer needed

$40 these are $90 from the shops so less than half price.

R32 flared fiberglass front guards

No longer needed. Never fitted. Condition ok.

$150

Pioneer single din DVD player and screen

No longer needed. Can show working in car.

$400

Xplod CD player

Had it in my last car. Pulled it out before selling it.

$20

Pioneer tape player

That's right, you read right. Tape player. Can control pioneer stackers though, so could be good value

$20

R32 Stock Airbox

$50

Blaupunkt 2x10 inch Subs

Carpet is peeling off the box on one spot, but apart from that, good value. Can show working

$100

Gold Class Cinemas reclining chair

No room in my new place for it

$80

R32 KYB climb shocks and springs

Nice and low. One front was leaking. Not sure how bad. Got coilovers instead so no longer needed.

$100

R33 RS*r springs for front and standard springs for back

Nice and low. No longer have my r33. Cheap way to lower your car.

$50

R32 LHS Headlight

$100

for some reason, can't seem to upload any pics, so will provide a link to the pics shortly. otherwise, just forward me your email address, and the item you are interested in and i can send the pics

prices are firm

you can contact me on 0403 437 653

Link to comment
https://www.sau.com.au/forums/topic/232505-cleaning-out-my-shed-sale/
Share on other sites

  • 2 weeks later...


  • Similar Content

  • Latest Posts

    • Latest round of updates on the car. I purchased and installed a SWS clutch slipper to help with 60ft times and got some second-hand good condition 275/40R17 Hoosier DR2 radials. Test and tune in November showed the tyres were an upgrade over my over 15 year old mickey Thompson's and I got a 1.8 second 60ft and pb et of 11.71 but even then, that run wasn't great due to rain and driver error (the event got called off 10 minutes later fast forward to the weekend just gone 25th of Jan and there was finally a break in the weather to let racing happen. The first run the track was slippery and only managed a 12.1@129 Second run the track was better and got a new pb et and mph: 11.54@131   Lith and I then worked out that I installed the previously mentioned clutch slipper incorrectly and its never been working, and I had just been dumping the clutch the entire time, we also noticed it was on street boost and not race boost. So I lined up for a third run with the car turned up in the first two gears, but the passengers side axle objected to clutch dumps and left the chat which stopped my weekend.   so there will be another attempt in the future once I replace the tyres as they rubbed and are stuffed now. but a low 11 should be on the cards.
    • Ceramic coating and heat shielding, you mean?
    • Turbos don't require pulling the motor apart so that's "easier". I would recommend the Nismo R3 turbos instead if you want to do stock twin turbo. It doesn't make as much power as the 2530s but it's only like ~50 whp off the mark and should have better response (ball bearing CHRA, slightly smaller turbo). A local that went with a Garrett G30 and 6boost manifold recently nearly burned his car to the ground after the hood insulator started melting and and burning so if you go single turbo I recommend doing a lot of research and validation work to make sure you don't do the same.
    • New rear lights, filler panel sprayed, cleaned and back together    before, during, after shots 😍
    • 100% is gyprock, I agree. Slip of the keyboard. Haha! I left my indicator bulbs out to save a bit of weight.
×
×
  • Create New...