Jump to content
SAU Community

Recommended Posts

So I took the car to a sparky, he seemed nice enough and had knowledge of skylines.

I expected him to find an obvious electrical issue as I'm not an electrically minded person (but learning).

He has been scratching his head a little and we've been trouble shooting it together a little.

Brand new century battery, alternator output is solid. and its an intermittent low amperage drain

He has tracked it down to the "interior light dwell module" which I guess could be it, he's saying it seems stable when its been unplugged for the last couple of days (hes had it a week), I've never noticed the interior light being on and I see the car every night in pitch black so I definitely know the interior light is not on all the time at least.

I had the though it could be related to the alarm's internal battery being kaput & attempting to charge now and again, also the once the battery is very low on charge the alarm goes off but the siren is so quiet and barely croaking you can't hear it, I thought the alarms internal battery was so if the main car battery is cut off it uses its own internal battery to sound the alarm, so shouldn't the alarm be able to power itself after the power is drained from the main battery?

Anyone have any ideas?

Edited by 75coupe

Could be the light in the boot, have heard of a few people finding a fault with it.

I think with the alarm it sounds when the battery is going flat and if you remove power it will sound at full volume but i could be wrong.

If your alarm is a couple of years old, my money's on that. Had this happen to me in the old VR commowhore, took it to an auto electrician and he said straight up that its the alarm siren and he took it out straight away. Also said that they remove about 20 of them a week so not an uncommon problem...

Thanks for the suggestions guys, I thought the alarm battery sounded on the money when I thought about it, But I will check the boot light as well, thats one I would not of thought of...

Any other suggestions guys, otherwise this electrician is gonna pull my dwell module so the light comes on with doors open, which is ok, but if its unnecessary I'd prefer not...

I have been pointing him in a few directions, (actually the first electrician that I found I had to give ideas too... especially since I'm crap with electronics)

I had the same problem in my 33. If yours comes with one, check the cd stacker in the boot. Mine had no cd case in it but was still making noises. Pulled the plug and now i have full battery power. Try that

i had the same problem in my 32, when the alarm would sound it would be very weak and faint. my car wouldn't even crank over or i couldn't use the remote central locking.

i thought it was just my alarm draining the battery slowly, so i just turned off the siren. and never had the problem again. the immobilizer still works and everything.

like SLEEPR85 said i bet its the alarm siren needs replacing if you put that voltameter gauge to your battery you should get 0 reading if you get something higher there is a draw of current some place. replace the siren is a good place to start. it all sounds like your alarm. btw what alarm do you have?

He did do a reading of current being drawn, said he tracked it down to the dwell module, I suggested the alarm as thats what I thought it would of been, but he's the 'Professional'

Its a satellite tracker alarm of some sort...

I'll see how it goes, but if its still alive after a week alls good, but I don't think I will go back to him if its dead again, especially after $200 and no joy.

ho long should a battery be able to keep charge for anyway, I've left other cars for weeks and all has been fine, but not the skyline, well at least not lately...

your lucky - mine wont last 3 days with my tracker.

i spent 2 days at an auto electrician like you - one thing i found was a 1.3A draw from the turbo timer with everything off - pulled it out and never put one back in.

without the current draw numbers its hard to tell if its bad or not - from memory a normal standard car should only drain about 1 to 1.5 A when sitting

like SLEEPR85 said i bet its the alarm siren needs replacing if you put that voltameter gauge to your battery you should get 0 reading if you get something higher there is a draw of current some place. replace the siren is a good place to start. it all sounds like your alarm. btw what alarm do you have?

you mean ammeter. and with idle current (IE clock,radio,alarm) it should be below 70mA (or 0.007A.) if its up around 100-120 then you have a draw somewhere. given that it would drop a battery within 3-4 days.

when was the last time you put a new battery in it?

do you know what your idle current is on that car?

Its a brand new century battery, the sparky said he put a truck battery in it to 'Test' battery and it was being drained as well...

Maybe I should take it to a proper Auto Electrician?

Me being crap with electrics, can a multimeter tell me the current draw?

if you use it correctly - yes. it needs a current function

google ammeter and use that idea to work out what is wrong with yours.

may as well learn how to use a meter.

I would have a meter handy and get a baseline draw on the car then start pulling fuses. it will drop off as you pull fuses. when it gets close to zero that will be the idle current.

give me a baseline draw to work with and I'll help you.

Thanks for the pointers I reckon as you say I should learn how to use a multimeter to its full capacity and I love being able to diagnose problems, this is as good a time as any to start learning electric stuff...

I'll give it a go over the weekend and report back, thanks for your posts most helpful, I like to learn...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You've just discovered a really good reason to tell yourself, yes, I do need to buy an aftermarket ECU. Put the MAF in the bin. Slap in the new ECU and have a think about what turbo sounds you prefer.  Do you want a 90's style BOV wooosh? Do you want a hektik tsututututu?  Mate, can't go wrong. Just gotta get that ECU and the world is your oyster. 
    • Hi. Iam just curisou about this topic. I saw this video. It is about Greddy Type FV2. I know that BoVs are about that sound but how and when to use it? I read some topic here and from what i have understand on stock RB with MAF there will be some "problems" if you use this BoV? It vents the air in to the atmosphere and the MAF on stock car needs this air back in to the intake and not out? Or is it wrong? If so...i saw you can put some adaptor to circule air back...but does that not "loose" that sound? I saw another BoV from Turbosmart and it has two "exhaust" like ports? One is for the stock tubing for letting air back and one is for "sound" and let the air in the atmosphere? Can someone please explain? This is the Greddy one:  And this is the Turbosmart.     THANK YOU!! EDIT: So i read about this topic some more and i if i understand that correctly: That Greddy can function either like BoV or 100% Bypass valve? And that Turbosmart is what they called hybrid so you can adjust what and how many air can be vented out or back in? Is this right? THX!
    • That dirty voltage drop is the culprit I suspect 
    • i cant get them all in 1 screenshot unfortunately as i just dont know how to move things around tbh, but they are all from the same log and the line crosses at the same point for all of them
    • It's about time I start work on my sun tan. So I knocked up a few parts that will all combine together to become my new power steering reservoir. Now just to produce an abundance of UV and IR rays while melting a heap of bits of alu to become one... Well, that's after I put one more hole in it for the return line to plumb to. It likely won't be this weekend, as Sunday I'm meant to be in doing some last minute stuff to the AMG race car, and the weekend after will be filled with non my Skyline stuff, followed by Bathurst 6 hour. So I don't expect to get to melt metal for at least 3 weeks.   I also managed to stuff up and start cutting the hole for the res to pump pipe on the wrong side of the line... It means instead of the lines being nice and tight against the inner guard, they'll be out off the guard.    The size of it means I should end up with about 1.8L of power steering fluid, and still have space for another half a litre before it reaches the overflow/breather. This is wayyyyyyy more capacity than factory, which should help keep Powersteer oil temps lower, and the design hopefully allows it to prevent any aerated oil being able to makes its way down to the bottom as it'll have a couple of baffles and some hopeful trickery to force air bubbles away from the bottom.
×
×
  • Create New...