Nismo 2 Way Diff

[stm]

Hi can anyone help, I have fitted a nismo diff center to my spec1 r33 but my

original output drive flanges from the r33 do not fit the nismo diff.There seems to be less

splines in the original flanges and are too long.

any help or info would be great .thanks.

[White GTS-T]

I thought when you bought the Nismo diff you got new half shafts with it?

[bubba]

Mine came with new halfshafts, gasket and bolts. Was like a complete rebuild kit.

[White GTS-T]

What did you pay for it bubba? I just got a kazz in mine, $900 delivered. Came with bearings seals and new gasket. Were the Nismo half shafts any thicker?

[stm]

Found that diff is probably an r33 gtr nismo diff so will need gtr output and halfshafts.

[bubba]

What did you pay for it bubba? I just got a kazz in mine, $900 delivered. Came with bearings seals and new gasket. Were the Nismo half shafts any thicker?

A little over $1100 delivered I think (bought a heap of stuff from Nengun at the same time). The half shafts were just standard OEM but they were same length instead of offset length like the stockers I pulled out..

[SLY33]

Hi mate,

i recently bought an OS giken 1.5way from greenline for my S1 33gts-t, and encountered the same problem as you. At first we thought we had been delivered the wrong diff, but checked and it was correct.

we ordered the appropriate new half shafts from nissan.

A small note explaining the half shaft requirements should be included in the online item description, would have saved me some time!

i think you can use 32gtr half shafts, but then you will need 32gtr rear drive shafts if im not mistaken.

cheers.

[bubba]

Yes if you get gtr halfshafts you need gtr axles as they are a 6-bolt flange.

[STATUS]

^^^ if they need GTR shafts then you need GTR outer hubs as the axles are thicker... i dont reckon this is the right solution.

i have not encountered this problem as all the NISMO diffs ive used come with half shafts (but the shafts are the same as many std ones). The OSGIKEN one in our race car just needed two short ones instead of the STD one long one short setup. I just pulled them out of a spare r33 diff i had lying around.

[bubba]

^^^ if they need GTR shafts then you need GTR outer hubs as the axles are thicker... i dont reckon this is the right solution.

i have not encountered this problem as all the NISMO diffs ive used come with half shafts (but the shafts are the same as many std ones). The OSGIKEN one in our race car just needed two short ones instead of the STD one long one short setup. I just pulled them out of a spare r33 diff i had lying around.

That's interesting, my Nismo diff used two long ones.