Jump to content
SAU Community

Recommended Posts

  • Replies 1.1k
  • Created
  • Last Reply

Top Posters In This Topic

It basicly a race where you do as many laps as you can in 12 hours, you can go solo or in teams of 2,3,4,6 and mixed male/female.

more info here http://www.wa12hour.com.au/

its pretty good, atmosphere is great, the commentary goes on all night over the PA system, theres a coffee van going all night too!

The one problem i have found with the 12 hour is not much goes into advertising, so the numbers have been dropping over the years, the guys that run it do it volenteer their own time, so without them, the event wouldnt happen, so it would a huge loss if it were to be cancelled due to low numbers.

Steve

rahahaha

yeah sure why not, you work in city? we can do bridges on a lunch break if you're keen i work east end of hay street at the moment

yeah mate,

I am in Kandahar, Afghanistan.... Just down the road.

I will start riding now and see you in say 6 years!

Keen for a bridges ride, but will also being doing Doubleview down to Freo and then into the City and Home in the coming weeks once home

i hate fixies.

i hate that my bike is in their category. "oh you got a fixy do ya?"

i hate people who ride fixies.

i hate the false sense of superiority they have about their bikes which are merely a fashion accessory.

i hate that people who cannot ride a regular bike opt to ride a dangerous fixwheeled bike along a busy stretch of road. and will not stop at a red light because of the fact that they don't know how to stop them.

i hate that their general demographic choose not to wear a helmet or have any lighting on their bike or reflectors or brakes. because it "ruins the lines of the bike."

infact i hate people who ride with no helmet in general. don't use the excuse "it's my perogative if i dont want to wear one, i deal with the consequences." because it's not. if a car hits them, then driver has to live with that. as does your family, and your friends. you don't see driver's saying "it's my perogative if i wanna wear a seatbelt or not, i deal with the consequences" so wear your f**king helmet.

resting your helmet on your handlebars is not wearing your helmet.

female riders. putting your helmet in your basket is not wearing your helmet.

i hate that people use the excuse "i don't ride often so i don't bother with lights". you don't see motorists saying "i dont DRIVE often so i dont bother switching on my lights"

or

this was a good one,

"i dont have lights cos i only ride on the footpaths - dont need a light to ride on the footpath"

one - it's illegal to ride on footpath completely. two. you're hurting downt he footpath at about 25/30kmh on some superwide mountain bike. pedestrians can't see you. you can't see them.

grow a brain.

god

/rant

to me - a fixy is a cheap 10 speed frame, that weighs heaps because it's made of dirty old steel. with some overpriced paintjob worth more than the bike itself. deepV wheelsets for fashion. not for function (not that velocity wheels are that functional. i hear they're prone to cracking)

a fixy is a bike that wieghs heaps and goes slow due to it's weight, in conjunction with the drivetrain geared ridiculously high (47T/15T) that they can't get up any hills

my bike may "look" like a fixy because it looks cool in the eyes of a fixy rider. but cannondale caad frames are lightweight. and the geometry is far more responsive than a shitty "fixy". and drop bars are handy for riding aero.

that said - i do have a chip on my shoulder and cannot wait to do this bike race this sunday against all he roadies =)

Edited by Mr Eps
i hate fixies.

i hate that my bike is in their category. "oh you got a fixy do ya?"

i hate people who ride fixies.

i hate the false sense of superiority they have about their bikes which are merely a fashion accessory.

i hate that people who cannot ride a regular bike opt to ride a dangerous fixwheeled bike along a busy stretch of road. and will not stop at a red light because of the fact that they don't know how to stop them.

i hate that their general demographic choose not to wear a helmet or have any lighting on their bike or reflectors or brakes. because it "ruins the lines of the bike."

infact i hate people who ride with no helmet in general. don't use the excuse "it's my perogative if i dont want to wear one, i deal with the consequences." because it's not. if a car hits them, then driver has to live with that. as does your family, and your friends. you don't see driver's saying "it's my perogative if i wanna wear a seatbelt or not, i deal with the consequences" so wear your f**king helmet.

resting your helmet on your handlebars is not wearing your helmet.

female riders. putting your helmet in your basket is not wearing your helmet.

i hate that people use the excuse "i don't ride often so i don't bother with lights". you don't see motorists saying "i dont DRIVE often so i dont bother switching on my lights"

or

this was a good one,

"i dont have lights cos i only ride on the footpaths - dont need a light to ride on the footpath"

one - it's illegal to ride on footpath completely. two. you're hurting downt he footpath at about 25/30kmh on some superwide mountain bike. pedestrians can't see you. you can't see them.

grow a brain.

god

/rant

to me - a fixy is a cheap 10 speed frame, that weighs heaps because it's made of dirty old steel. with some overpriced paintjob worth more than the bike itself. deepV wheelsets for fashion. not for function (not that velocity wheels are that functional. i hear they're prone to cracking)

a fixy is a bike that wieghs heaps and goes slow due to it's weight, in conjunction with the drivetrain geared ridiculously high (47T/15T) that they can't get up any hills

my bike may "look" like a fixy because it looks cool in the eyes of a fixy rider. but cannondale caad frames are lightweight. and the geometry is far more responsive than a shitty "fixy". and drop bars are handy for riding aero.

that said - i do have a chip on my shoulder and cannot wait to do this bike race this sunday against all he roadies =)

I want a fixie, sell me one?

Spanner in the works?

you only just realised that fixies are a fashion accessory and if it wasn't for that reason they would never have been made again other than for track riding? wow, talk about slow, LOL.

as for the helmet and lights, i like to use the example "what gives you the right to decide what laws you obey and what you don't? in that case i'm going to ignore the law and murder you"

as for riding on the footpath, that is a local/state thing. in qld you are allowed to ride on the footpath unless otherwise signed.

oh and the old fixies are the ones that weigh heaps. they are the ones that are worth lots because they are collectors items because they are originals. pretty much all the new ones will be lightweight alloy frames like yours. some of the cheaper ones (like the apollo ones) will be cromo frames, but they are only $700. the alloy frames are made by the companies who designers are the types who think they are a good idea. the chromo frames are made by the companies who think they are a shit idea and are only doing them to make money, LOL

haha - yeah all above posts are true - and i have known forever that fixies are a fashion accessory - but only recently on a visit to the cafe strip have i noticed that they are dangerously ridden by people who CANNOT RIDE

for instance - i would be on a bike regardless, mountain, track, road, racer, whatever.. because i love riding - i like single speed because it's more of a challenge than with gears for training purposes - plus, personal preference, i like the un-interrupted handlesbars without the integrated brake handles, i like to drape my fingers along that to lock my arms out at steeper angle..

but people who ride fix gear and can't ride to begin with - that's dangerous!

macdog - what is your budget for a fixgear? my opinion will obviously be viewed as bias - however my opinion the cannondale capo is the ducks nuts. this is comparing it having ridden:

specialized langster

masi

trek soho S - (IMO this is the WORST frame ever. sluggish as f**k)

Giant bowery '72

Giant Bowery mashup

if you're looking for a good ride - get a capo and pay the extra

if you're looking for hipster bling..

maurice.jpg

mongoose maurice

lilfixie2.jpeg

supreme colab

mash-cinelli-benny-gold-1.jpg

MashSF X Cinelli colab (this is not just bling, these thigns hammer but no way will you afford :)

or there's pieces of shit like these ones

081008092500_velonyc-detail.jpg

haha - yeah all above posts are true - and i have known forever that fixies are a fashion accessory - but only recently on a visit to the cafe strip have i noticed that they are dangerously ridden by people who CANNOT RIDE

for instance - i would be on a bike regardless, mountain, track, road, racer, whatever.. because i love riding - i like single speed because it's more of a challenge than with gears for training purposes - plus, personal preference, i like the un-interrupted handlesbars without the integrated brake handles, i like to drape my fingers along that to lock my arms out at steeper angle..

but people who ride fix gear and can't ride to begin with - that's dangerous!

macdog - what is your budget for a fixgear? my opinion will obviously be viewed as bias - however my opinion the cannondale capo is the ducks nuts. this is comparing it having ridden:

specialized langster

masi

trek soho S - (IMO this is the WORST frame ever. sluggish as f**k)

Giant bowery '72

Giant Bowery mashup

if you're looking for a good ride - get a capo and pay the extra

if you're looking for hipster bling..

maurice.jpg

mongoose maurice

lilfixie2.jpeg

supreme colab

mash-cinelli-benny-gold-1.jpg

MashSF X Cinelli colab (this is not just bling, these thigns hammer but no way will you afford :)

or there's pieces of shit like these ones

081008092500_velonyc-detail.jpg

Cheers for the input mate,

I like the look of the first one (mongoose) how much is that?

I'm also trying to sell my Road bike http://www.skylinesaustralia.com/forums/Gt...l=gtr+road+bike

I just want something a bit different, less maintenance as well, I see fixies all the time in the city, some pretty good ones at that.

the guys that ride them in the city are crazy, I don't know how they survive a days work being a courier, they go through red lights hold on to trams, but i suppose they get the job done FAST! haha

Fck... the cannondale one you mentioned looks awesome, i want that one... who in melbourne has that and do you know how much it is?

Edited by macdog

personally i see nothing wrong with your road bike... but if you want to get something different by buying the same thing as everyone else then go right on ahead...

haha

but seriously if you're looking at getting the cannondale capo then i can't think of anything that can surpass it's speed. most road racers struggle to keep up with me until i hit an uphill.. then i beat them on the uphill cos the lower gear ratio means i can smash them easier..

another advantage is the drop bars with the aero brakes..

capo is worth about $1600 RRP but i paid a bit over a grand as a clearance, the 2009 is white on grey with purple chain and purple wraps

capo_09.jpg

^^ pic doesn't do it justice... you can't see the white rims there...

i've swapped the purple chain and wraps out for white cork wraps.. light blue KMC chain and hot pink gussett pedals..

look cool but mroe for function - bigger pedals means more agressive stomp, which is what you need on a track bike..

for 2010 the capo has been released in the following liveries

b0111222_22481241.jpg

ultra faggoty hipster chrome

and

this wicked ass black

0PR2_blk.jpg

both are avail in drop or flat bar... i suggest drop to be different to all the homers out there :)

personally i see nothing wrong with your road bike... but if you want to get something different by buying the same thing as everyone else then go right on ahead...

haha

but seriously if you're looking at getting the cannondale capo then i can't think of anything that can surpass it's speed. most road racers struggle to keep up with me until i hit an uphill.. then i beat them on the uphill cos the lower gear ratio means i can smash them easier..

another advantage is the drop bars with the aero brakes..

capo is worth about $1600 RRP but i paid a bit over a grand as a clearance, the 2009 is white on grey with purple chain and purple wraps

capo_09.jpg

^^ pic doesn't do it justice... you can't see the white rims there...

i've swapped the purple chain and wraps out for white cork wraps.. light blue KMC chain and hot pink gussett pedals..

look cool but mroe for function - bigger pedals means more agressive stomp, which is what you need on a track bike..

for 2010 the capo has been released in the following liveries

b0111222_22481241.jpg

ultra faggoty hipster chrome

and

this wicked ass black

0PR2_blk.jpg

both are avail in drop or flat bar... i suggest drop to be different to all the homers out there :)

If only there were more cyclists like you mate! your a pisser... hahahaha

Keep up the good work, I'm going to stop by St.kilda cycles to see how much they will offer me for my GTR and then try and get a good deal on the black bike.

However i did like the look of the Purple chain and purple handle bars on the other one...

Cheers for your help again.

Do you ride with brakes?

yes i do - on account of i don't want to go under a bus - but lately for something different i have been thinking about attaching a fix cog to the other side of the hub to see what all the fuss is about... but not too worried

i cruise at about 35/45kmh most times so if fixie riders wanna tease me for riding with brakes and freewheel then be my guest and settle it in a race.

pink slips is all i bet

wait - no brakes and fixed wheel?

so how DO you stop said bike?

You

A. Use your weight to manouvre the bike turn sharply stuff like that...

or

B. Jump off your bike and fall

or

C. Hit whatever is coming at you! hahaha

you left out ....

D: make your knees explode by trying to push against the pedals spinning

also rowan, i think you will find that the capo weighs a bit more than 5.5kg. it would probably be closer to 7 or 8kg. maybe even 9kg. redline do a kids race bike designed for 5yr olds that is basically a mini fixie which weighs in at 5.7kg. a high end carbon road bike will come in at 7kg. yes that has the extra weight of the gears, but the extra weight of the gears would be 500g max. (10 speed dura-ace cassette weighs 163 grams, which would be canceled out by the weight of the freewheel, derailleurs weigh a bit under 240 grams for the pair and the shifter part of the brake lever would weigh about 250g for the pair as well. and then once you take into account the fact that dura-ace cranks weigh about 250grams or more less than the cranks on the capo, plus the brake calipers weigh at least 100g less, pluss the fact that a carbon frame usually weighs a few hundred grams less than an alloy frame, i'd say that your bike would easily weigh well over 7kg)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thanks, I removed the fuse and the relay from the car and made my own circuit with them to test them with a test bulb.  I will look for the wiring diagram and go from there.
    • Jdm DC2R is also nice for a FF car compared to the regular hatches of the time.
    • Now that the break-in period for both clutch and transmission is nearly over I'd like to give some tips before I forget about everything that happened, also for anyone searching up how to do this job in the future: You will need at least 6 ton jack stands at full extension. I would go as far as to say maybe consider 12 ton jack stands because the height of the transmission + the Harbor Freight hydraulic platform-style transmission jack was enough that it was an absolute PITA getting the transmission out from under the car and back in. The top edge of the bellhousing wants to contact the subframe and oil pan and if you're doing this on the floor forget about trying to lift this transmission off the ground and onto a transmission jack from under the car. Also do not try to use a scissor jack transmission lift. You have to rotate the damn thing in-place on the transmission jack which is hard enough with an adjustable platform and a transmission cradle that will mostly keep the transmission from rolling off the jack but on a scissor lift with a tiny non-adjustable platform? Forget it. Use penetrating oil on the driveshaft bolts. I highly recommend getting a thin 6 point combination (box end + open end) wrench for both the rear driveshaft and front driveshaft and a wrench extension. These bolts are on tight with very little space to work with and those two things together made a massive difference. Even a high torque impact wrench is just the wrong tool for the job here and didn't do what I needed it to do. If your starter bolts aren't seized in place for whatever reason you can in fact snake in a 3/8 inch ratchet + 6 point standard chrome socket up in there and "just" remove the bolts for the starter. Or at least I could. It is entirely by feel, you can barely fit it in, you can barely turn the stupid ratchet, but it is possible. Pull the front pipe/downpipe before you attempt to remove the transmission. In theory you don't have to, in practice just do it.  When pulling the transmission on the way out you don't have to undo all the bolts holding the rear driveshaft to the chassis like the center support bearing and the rear tunnel reinforcement bar but putting the transmission back in I highly recommend doing this because it will let you raise the transmission without constantly dealing with the driveshaft interfering in one way or another. I undid the bottom of the engine mount but I honestly don't know that it helped anything. If you do this make sure you put a towel on the back of the valve cover to keep the engine from smashing all the pipes on the firewall. Once the transmission has been pulled back far enough to clear the dowels you need to twist it in place clockwise if you're sitting behind the transmission. This will rotate the starter down towards the ground. The starter bump seems like it might clear if you twist the transmission the other way but it definitely won't. I have scraped the shit out of my transmission tunnel trying so learn from my mistake. You will need a center punch and an appropriate size drill bit and screw to pull the rear main seal. Then use vice grips and preferably a slide hammer attachment for those vice grips to yank the seal out. Do not let the drill or screw contact any part of the crank and clean the engine carefully after removing the seal to avoid getting metal fragments into the engine. I used a Slide Hammer and Bearing Puller Set, 5 Piece from Harbor Freight to pull the old pilot bearing. The "wet paper towel" trick sucked and just got dirty clutch water everywhere. Buy the tool or borrow it from a friend and save yourself the pain. It comes right out. Mine was very worn compared to the new one and it was starting to show cracks. Soak it in engine oil for a day in case yours has lost all of the oil to the plastic bag it comes in. You may be tempted to get the Nismo aftermarket pilot bearing but local mechanics have told me that they fail prematurely and if they do fail they do far more damage than a failed OEM pilot bushing. I mentioned this before but the Super Coppermix Twin clutch friction disks are in fact directional. The subtle coning of the fingers in both cases should be facing towards the center of the hub. So the coning on the rearmost disk closest to the pressure plate should go towards the engine, and the one closest to the flywheel should be flipped the other way. Otherwise when you torque down the pressure plate it will be warped and if you attempt to drive it like this it will make a very nasty grinding noise. Also, there is in fact an orientation to the washers for the pressure plate if you don't want to damage the anodizing. Rounded side of the washer faces the pressure plate. The flat side faces the bolt head. Pulling the transmission from the transfer case you need to be extremely careful with the shift cover plate. This part is discontinued. Try your best to avoid damaging the mating surfaces or breaking the pry points. I used a dead blow rubber hammer after removing the bolts to smack it sideways to slide it off the RTV the previous mechanic applied. I recommend using gasket dressing on the OEM paper gasket to try and keep the ATF from leaking out of that surface which seems to be a perpetual problem. Undoing the shifter rod end is an absolute PITA. Get a set of roll pin punches. Those are mandatory for this. Also I strongly, strongly recommend getting a palm nailer that will fit your roll pin punch. Also, put a clean (emphasis on clean) towel wrapped around the back end of the roll pin to keep it from shooting into the transfer case so you can spend a good hour or two with a magnet on a stick getting it out. Do not damage the shifter rod end either because those are discontinued as well. Do not use aftermarket flywheel bolts. Or if you do, make sure they are exactly the same dimensions as OEM before you go to install them. I have seen people mention that they got the wrong bolts and it meant having to do the job again. High torque impact wrench makes removal easy. I used some combination of a pry bar and flathead screwdriver to keep the flywheel from turning but consider just buying a proper flywheel lock instead. Just buy the OS Giken clutch alignment tool from RHDJapan. I hated the plastic alignment tool and you will never be confident this thing will work as intended. Don't forget to install the Nismo provided clutch fork boot. Otherwise it will make unearthly noises when you press the clutch pedal as it says on the little installation sheet in Japanese. Also, on both initial disassembly and assembly you must follow torque sequence for the pressure plate bolts. For some reason the Nismo directions tell you to put in the smaller 3 bolts last. I would not do this. Fully insert and thread those bolts to the end first, then tighten the other larger pressure plate bolts according to torque sequence. Then at the end you can also torque these 3 smaller bolts. Doing it the other way can cause these bolts to bind and the whole thing won't fit as it should. Hope this helps someone out there.
×
×
  • Create New...