Jump to content
SAU Community

Recommended Posts

R33 GTR. 2.8 litre with a pair of RS's hanging off the side of it. 380 - 400 RWKW or there abouts.

Late model box in it only having 11,000 KMS on it and i stripped 3rd. Made a good mess :(

Now have the OS 1-5 + input in. Ill get back to ou on how it is on the street.

I think most people will agree that a gearbox is like a clutch. It really depends how you treat it.

So far iv'e had no problems with a stock 5 speed box and similar power levels. However, when I take the car to the track it may be a different story. I know the stock boxes tend to let go in 3rd but sometimes this can be attributed to harsh clutches and particular brands.

I am also interested in feedback from people using these aftermarket gearsets.

^^

When my box let go I was giving it a hard time (8000 rpm change from 2nd to 3rd) but knowing that 3rd is a weak point i was always very tip toey into 3rd, this gear change being no exception. Clutch is a Nismo twin plate coppermix which may or may not have helped but atleast it has a sprung centre.

R32 GTR, 3 years ago when it had 400hp atw stripped 3rd gear when shifting from 2nd, felt weird sloting (worn synchros?) in for a split second then bang, had os triple plate.

Also snapped a uas pivot ball a few months ago.

If money is no problem then I'd will/would go an os, ppg gearset to handle the hp.

R32 with 430 RWHP. 80K on the standard box. Little bit of short track and a few drag passes. Syncros going

The OSG 5 Speed kit is going in as we speak-there is a thread in this sub forum. I will post the complete parts list when I get home

From memory a standard GTR gear box can take up to 500kW but all depending how you shift gears and how well you treat it.

I think a Getrag 6 speed would be quite good and I was told a Holinger 6 Speed was real tuff.

Dont think that a Getrag 6 speed (r34 'box) is really the answer, if ur breaking GTR 5 spds, then ull prob break the Getrag 6 speed

If i had one and it broke, id be looking at the OS Giken gearsets, either the 1-3 or 1-5, or go Aussie made and go for a PPG gearset.

I looked at the Getrag as an option but in the end I went for the OSG kit...from what I could gather the Getrag GB rebuild was a pricey endeavour.

As for a standard box with 500Kw..I suppose you can put any Kw through a box is you baby it. I would think 400AWKw would wear a 32-33 box out pretty quickly if driven with any verve

One of my friends had a Trust gear set in his 32. He use to race the car. He liked the gear set, said it took him a while to get use to it, but the harder you changed gears the better it was. Don't know what it would be like for a street car though.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I vote go red. Only because I hate keeping gloss black clean. Was no worries helping out either! Glad you've survived the rain outs of QLD
    • I would again like too thank Matt for his help in me sourcing the detachable hard top for the little red car, without Matt's assistance in inspecting it and locking it down, I can guarantee it would have sold before I could get up to see it,  and as that was the only available NC hardtop in Australia, I consider myself extremely lucky on multiple levels To say I'm more that happy would be an understatement And, it is 100% water tight, I drove through torrential rain coming back south, and by torrential, they type of rain that doing 40kph in a 110kph zone was a real thing, and even then, the standing water on the Hwy was deep enough to throw waves I'm also more than happy that the huge "BEASTS" that Matt calls dogs didn't eat me for lunch, I'm sure the sniffs and licks were more to "taste test" me, over being to friendly Now to work out what colour to get it painted, panel match, or gloss black........first world problems are real
    • Actually I might have figured out. Looks like there is a tab according to google images but it's hidden. Silly me.
    • No clips on this one like the other connector. Only that red tab that I can push slightly up.
    • For any loom connector that has an obvious release that resists pushing far enough to unclip, just spray some silicone lube into it. You might also benefit from using a bent screwdriver or small pick to push in the right place at the right angle.
×
×
  • Create New...