Jump to content
SAU Community

Recommended Posts

I am trying to find the plug/connectors for the reverse lights. This is the other socket(s) that I have in mind.

Anyone tell me which two pins are for the reverse lights?

This socket is front left next to the radiator. I will post aother pic of its position.

Thats the neutral switch you can see bridged - my guess is the reverse lights are somewhere in these sockets.

That first picture of the plug with the yellow circle around it is an ABS sensor plug.(100% sure)

I'am pritty sure its the Grey 8 pin plug that has a pin missing the one just below your bridged neutral plug that contains the reverse lights.

From memory mine went:

Pin location on grey 8 pin plug:

......1......................2......................3......................4

.........................................................................(Power)

................................................................................

......5......................6......................7......................8

(missing).............(nuetral)............(Reverse).................

On the Gearbox the reverse switch will be the one closest to the bell housing, the neutral switch is closest to the selector. I had to run some wires from the reverse switch on the gearbox to this grey plug.

Hope this helps!

MEGA

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Interesting, I've heard complete opposite on my end. Bit of a lottery I guess.
    • Getting Dangerously close to being ready to go back in the car. Rockers in with clearance castings now (and a quick check with the USA for the torque settings for the larger custom bolts) Covers and ported FAST Manifold sitting on there. Not fully tightened down as there's some clearancing required for the water pump with the earlier LS1 water pump styles. Example of the clearancing needing to be done: The body has to be ground a little but I'm struggling finding an actual piece of it. The later variant of water pump resolves the issue as the manifold was designed around it. It only came on the VZ LS1 in Australia, it got a different pulley for Gen4 motors. (it also costs $450... vs... $0).
    • https://files.fm/f/5atwkuvcjd
    • Doing some height adjustment on front suspension on a v35 and noticed this. The passenger side looks correct. So wondering what's happened to the drivers side?
    • Oh...I have the electric mirrors as well iirc ...they're in the same state as just about every other R31 door mirrors, with the 3 plastic screw towers broken/cracked in the plastic molding. All the interior is 'dry', so the mirror switches etc likely all work fine. Some pics below of the trimmer pieces ~ looks to me like previous owner, painted chrome finished trims with black paint ...ergo, the chrome underneath is likely a-ok... ...starts to look yukky posting stuff like this, how much did it cost in fuel on your last sortie up this way?...me just thinking aloud, borrow someone else's 4cyl to cut costs, come do your own pick'n'pull like before to save me some bother...hehe.. but whatever, I'll just earmark bits I know you want, because the way this is all panning out, I'll be able to retire the R31 from daily duty at long last, replacing it with a Subaru wagon I'm lining up in the wings...ergo, my attitude towards the donor pinny shell is starting to wane a bit, and I'm more than happy to help you out there... Like you say though, no rush...and I'll guarantee we won't be moving too far from this locale at any rate 😎
×
×
  • Create New...