Jump to content
SAU Community

Recommended Posts

nah wont be dropping it.

The roads around my way are a joke.

Cant even get in the servos around here as it sits.

I had a EiBach lowering kit but sold it ;)

cheers for the kind words guys

I got the Eibach springs on mate, car looks great - Ill have to get some new pics up as soon as it stops raining so I can wash it :down:

Hey guys,

Have added a couple of bits to the car. Took some photos with the iPhone, so excuse the quality of the pics:

• CF Rear Diffuser

• US Battery Cover (to cover the right side of our engine bay)

• CF Hood Hampers

• Eyelids

post-60700-1275488378_thumb.jpg

post-60700-1275490206_thumb.jpg

post-60700-1275490380_thumb.jpg

post-60700-1275492077_thumb.jpg

post-60700-1275492881_thumb.jpg

post-60700-1275495748_thumb.jpg

The USA G35 forums say that the cheapest version on Ebay is a POS, but the more expensive one is rather good fitment and look. From memory the cheap one is around US$200 + shipping and the god one is US$400 + shipping.

After a good two months of waiting for my order to be shipped. My Inven front bumper for the coupe finally arrived from the U.S. Will post pics as soon as its fitted with my impul sides.

post-66891-1275885743_thumb.jpg

Edited by CRISP 35
I got the Eibach springs on mate, car looks great - Ill have to get some new pics up as soon as it stops raining so I can wash it :thumbsup:

good to hear. :thumbsup:

I would have loved to use them but have trouble at the stock hight.

Cant wait to see some pics

^^^ looks great .... what are the width and offset of your wheels?

thanks for the comments.

19 x 9 +22 (F) on 245/35R19

19 x 10 +22 ® on 275/35R19

no rubbing but then again i haven't dropped it and i travel light. read somewhere here that the max width at the rears to avoid rubbing was 9.5" at +22 but the extra rim depth was too tempting.

Thanks for the info. I bought my LMGT4s in 9.5 +20 and the fronts are perfect but the offset on the rear is sadly lacking. Once I lowered the car it severely cambered in (and looked very shite), so I got some SPC rear camber arms, and the alignment workshop brought the camber from 4 degrees back to about 1.5 degrees. Looks a bit better now, but I definitely agree with your 10 +22s on the rear - I am going to buy a pair of 9.5 +12 or 10 +15s for the rear of my car to make it look better. In fact I am going to try some 20mm bolt-ons for a car show this weekend, so we will see how she runs with 9.5 +0 :wacko: - I will post pics next week. Note too I am running a stretched 215 on the front and 235 on the rear (I like the drift look), so will get no rubbing.

Nice wheels :wacko:

My 9.5 +18 rears, wearing 275 wide tyres, were VERY close to scrubbing. In fact one of them was scrubbing until i had the camber adjusted (using the factory camber bolt).

I've since had my guards rolled and dropped the car even lower. I'm now suffering the same problem as nightcrawler. It has caused additional camber and the wheels tuck-in too much, looking much crapper than before.

My plan of attack is to eventually fit some spacers and slightly stretched tyres (245 maybe). Night crawler, if you could throw up some pictures of your setup with 20mm spacers, it would be really appreciated.

Thanks for the info. I bought my LMGT4s in 9.5 +20 and the fronts are perfect but the offset on the rear is sadly lacking. Once I lowered the car it severely cambered in (and looked very shite), so I got some SPC rear camber arms, and the alignment workshop brought the camber from 4 degrees back to about 1.5 degrees. Looks a bit better now, but I definitely agree with your 10 +22s on the rear - I am going to buy a pair of 9.5 +12 or 10 +15s for the rear of my car to make it look better. In fact I am going to try some 20mm bolt-ons for a car show this weekend, so we will see how she runs with 9.5 +0 :banana: - I will post pics next week. Note too I am running a stretched 215 on the front and 235 on the rear (I like the drift look), so will get no rubbing.

no prob. your set up looks great judging from the track pics you posted and the wheels look hot. front is perfect already and putting on the spacers at the rear should bring it out to match it. looking forward to the pics.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I believe there was a similar one posted by @duggyphresh. They were re-routing their battery positive cable in the way I am also trying to achieve. Sorry, I’m new to this forum, so was a bit late to the party by a few months and so reignited the old thread, as I wanted to know how they got on with doing it.
    • Wasn't there a thread on this very subject just a few weeks ago?
    • Hi all! Looking to relocate the battery to the trunk of an R34 GTT. I want to do it using as many stock GTR components as I can (including the harness protectors from the 34 GTR that run underneath along the chassis to the engine bay). So far I’ve purchased the battery tray from a 33 GTR, as the captive weld nuts are already there just asking to be used. There is also the slight issue of now having to relocate the ABS/TC/Fuel Pump Control ECU, which in GTT’s sits right above where the battery will then sit on the tray. Has anyone already achieved this, and if you have any pics that you wouldn’t mind sharing? It would be great to see how others have done it and where you put them, as there are countless holes in the parcel shelf panel to potentially use. Just trying to get some ideas bounced around, and to help uncover any potential problems I may encounter by  my choice of location. TIA for any help!
    • Brand was ard.   I also threw a brand new battery at it and beefed up the wire from the alternator to battery and added an extra earthing point from the battery 
    • Evening all,       I'm replacing some bolts on my RB25 with probolt Australia bolts.       Does anyone know the following, m5 m6 etc 10mm 20mm etc       Coil cover   Cam covers   Plazamaman fuel rail   Front cover (timing cover)   Etc   Any help would be awesome   Or any lists anywhere
×
×
  • Create New...