Jump to content
SAU Community

Recommended Posts

I'm sure a lot of you have seen my car anyway... But here is some pics:

Can View more at http://www.sgv35.com

Beautiful car... maybe you should put your interest down here:

http://www.skylinesaustralia.com/forums/topic/393123-qld-photoshoot-by-tangcla/

I just picked this car up the other week, some of you may have seen it around Brisbane before with the previous owner. Most of the shots are from a Forge photoshoot before I got the car.

20" Forge wheels, Brembos, leather, bose stereo, coilovers, exhaust and a few other bits and pieces.

Overall really happy with the car. Just have to sort out some slight scrubbing problems on the front when hitting bumps and see if I can get the screen fixed. No picture showing up so I can't see what I'm doing...

Has anyone experienced any headlight problems with these lights? They don't seem all that bright on low beam?

Also I seem to be getting a "tick" noise when taking off and sometimes when changing gears. Sounds like it is coming from the rear brakes?

post-92106-0-58158100-1334099780_thumb.jpg

post-92106-0-16099700-1334099799_thumb.jpg

post-92106-0-35297000-1334099822_thumb.jpg

post-92106-0-77628200-1334099938_thumb.jpg

Hey Goodys, nice ride. Yeah ! Mine developed a ever so small "clicking" at around 60,000klms. Its so faint that even my mechanic cant work out where its from. I m pretty sure its a cv joint to the diff. I notice it when I first take off (sometimes 2nd gear), but definitely when you reverse then go forward.If it gets louder I will investigate further , but too minor to worry about now.

As for lights- the only issue with all skylines Ive had is the front passenger side parking buld. Usually just give it a bump & its good !

I just changed to LED'S as well as interior & wow thats good bang for the bucks!

Hey Goodys, nice ride. Yeah ! Mine developed a ever so small "clicking" at around 60,000klms. Its so faint that even my mechanic cant work out where its from. I m pretty sure its a cv joint to the diff. I notice it when I first take off (sometimes 2nd gear), but definitely when you reverse then go forward.If it gets louder I will investigate further , but too minor to worry about now.

As for lights- the only issue with all skylines Ive had is the front passenger side parking buld. Usually just give it a bump & its good !

I just changed to LED'S as well as interior & wow thats good bang for the bucks!

Thanks for the info mate, I have a hoist handy so might have a look around and see if I can find anything near the CV's.

I just got home from a drive and decided to actually have a look at the lights while they were on and it seems I have 3 out of the 4 low beam lights out haha. I think this might be my problem. I will hopefully pull them out tomorrow and see if they are stuffed.

For anyone interested the wheels are 20x10 -0 with a 5mm spacer so effectively -5 front and 20x11.5 -0 rear. Not sure what the camber settings are or if there is much adjustment in them. Need to bring them in a little bit to avoid some scrubbing on bumps.

Hey Goodys, nice ride. Yeah ! Mine developed a ever so small "clicking" at around 60,000klms. Its so faint that even my mechanic cant work out where its from. I m pretty sure its a cv joint to the diff. I notice it when I first take off (sometimes 2nd gear), but definitely when you reverse then go forward.If it gets louder I will investigate further , but too minor to worry about now.

As for lights- the only issue with all skylines Ive had is the front passenger side parking buld. Usually just give it a bump & its good !

I just changed to LED'S as well as interior & wow thats good bang for the bucks!

Also which interior bulbs/LED's did you replace? Any pics?

Also which interior bulbs/LED's did you replace? Any pics?

Yeh sounds like you have a short somewhere in the wiring. Replaced the Parking lights, Interior -headlining and door lights, boot and number plates also.

Just need to buy the clear indicator lense now. (had the car 4&1/2 years and just woke up to it now ! lol)

Anyone recommend somewhere in Sydney that sell them ??

I will post some pics when I do these.

Had a mess around today and it looks like it is just the RHS low beam bulb which has blown. It does not actually look blown but after connecting it to a battery I am still getting no light.

Will going to a "whiter" light give a bit better vision? How it is now I can't really see all that good on low beam..

Right now they are more blue than anything.

The lights are after market but not sure exactly what. Pic attached.

post-92106-0-78091000-1334214483_thumb.jpg

Also I seem to be getting a "tick" noise when taking off and sometimes when changing gears. Sounds like it is coming from the rear brakes?

Hey Goodys, nice ride. Yeah ! Mine developed a ever so small "clicking" at around 60,000klms. Its so faint that even my mechanic cant work out where its from. I m pretty sure its a cv joint to the diff. I notice it when I first take off (sometimes 2nd gear), but definitely when you reverse then go forward.If it gets louder I will investigate further , but too minor to worry about now.

It's the rear axle bearing.. Very common problem with v35 Skylines.. It's nothing major.. Just an annoying sound

Edited by Megahowler

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Aren't these run off of high voltage in OEM applications? Like 200+V. Or at least 48V in mild hybrids. At ~18,000 BTU ballpark nominal capacity the power draw is at what, 2.2 kW? ~185A is a pretty crazy amount of amps. At 200V it's only 11A. The 70A nominal kits with up to 100A peak draw I see for stuff like classic Porsches have pretty substantial compromises like shutting off at idle and not actually managing to keep the interior cool in hot conditions because they can only output like 6000 BTU. IMO if I had to pick what high amp draw component to retrofit to these cars I would start with the engine fan, not the AC compressor. You need an ~850-1000W brushless fan, something like this: I would love to see the data but I would bet that whatever you save by running the AC compressor in a more efficient regime with an electric motor you're probably losing to conversion losses anyways. It's not really like a clutch fan where you're losing power all the time even when it's nominally disengaged and it gets worse as it engages because the envelope tracking isn't that precise.
    • I am a volunteer marshal at the Grand Prix. As such, I get a "friend / family" ticket. It is a general admission ticket, valid for all 4 days. Anyone interested in my spare pass, please DM me. Ticket is "free, gratis and no expense".
    • agreed, the price vs gains it’s there.   unless you go china supercharger. Temu racing anyone?😂https://www.facebook.com/share/15nkfpsg7Z/?mibextid=wwXIfr that was one of the ones that popped up on my feed 😂
    • Bit of a long shot but if anyone has 4 of these laying around in new or near new condition. I will happily buy them off you.     https://skylinespares.com.au/product/stabilizer-door-glass-inner-new-8032404u03/?srsltid=AfmBOop6L5EgUFaHPHiVXoAhv5k8aJYwc77nGmoApp-hY03OiOsNVaOv Thanks 
    • I'm wondering is the Toyota and Mazda "collaboration" could see that new Toyota ???G20 ??? turbo engine that they have been showing off recently into a future MX5, apparently it's good for 400hp out of the box That could easily, possibly, be much better than the last collaboration between Toyota and Subaru with the boxer engine in the twins
×
×
  • Create New...