Jump to content
SAU Community

Recommended Posts

FOR SALE:

R32 GTR: GODZILLA: Capable of 1000 hp+ (Currently running 380kw atw)

Located in Sydney NSW

I have finally decided to sell my pride and joy.

Alot of time and money has gone into this machine to get it where it now is.

The GTR was in build for over two years as i wanted everything to be right before i took it out.

SPEEDO READING 80000 km's.

1500-km's since major work completed.

The car is completely engineered with certificates and i have receipts of the build.

Mods:

Engine:

N1 BLOCK (crack tested)

bored and honed to 2.7ltr

(the standard RB26DET was replaced for the N1 BLOCK)

HKS F-CON V PRO (computer)

TRUST Sump extension

TOMEI oil pump and sump baffle

JUN crank (tipple grounded and nitrated)

ACL modified rank barings

CORELO con rods

CP Pistons and rings

Ported head

TOMEI valve springs and retainers

HKS 272 degrees cam shafts

Custom intake plenum

Custom 90 mm Single throttle body

Custom intake pipe

Break master cylinder stopper

Custom alloy radiator

relocated oil filter

Custom 3.5 inch exhaust system

screamer pipe

52mm TEAL waste-gate

Gready T88-34D TURBO

SARD 720 cc injectors

BIG FEED NISMO FUEL PUMP

Custom oil catch can

OS adjustable cam gears

GATES timing belt

Custom oil cooler

NISMO engine mounts

4 CORE intercooler

Custom air box cover

HKS air filter

DRIVETRAIN:

OS GIKEN tipple plate clutch

2 way diff locker

lightened flywheel

INTERIOR:

6 POINT ROLL CAGE

NISMO 320-km Speedo

HKS 4 STAGE elec. Boost controller

HKS TURBO TIMER

NARDI steering wheel

RAZZA Gear knob

fire extinguisher

EXTERIOR

TRUST front bar

17” BLACK MESH WHEELS

(rear spoiler removed)

tinted break lights

tinted blinkers

window tint

bonnet pins

SUSPENSION and BRAKES

Adjustable coil-overs

Slotted front disc’s

front and rear strut brace's

PLEASE NOTE THAT THE ABOVE LIST IS FROM MEMORY.

I WILL UPDATE WITH A FULL MOD LIST WHEN I FIND THE PAPERWORK.

THANKS

$42500 ono (this price is well below the build costs of motor alone)

contact

SAL 0433114281

[email protected]

ADAM 0402329701

[email protected]

NOTE:

PLEASE SMS OR EMAIL EITHER OF US FOR PIX OF THE GTR

post-54838-1219669906_thumb.jpg

post-54838-1219670354_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/233357-1000hp-r32-gtr/
Share on other sites

will also consider trade.....

can't hurt to ask can it???

thanks

camlz

Would gladly swap my SS ute + cash adjustment for another 32 GTR:

2003 VY SS ute

6 speed manual with extreme clutch

Custom Twin 2.5 inch cat back

Opened cats

Pacemaker 3/4inch 4 into extractors

Mafless tune

Monaro cold air intake

Flamed engine covers signed by Greg Murphy etc

Custom VY4U Rear bumper

GTO sideskirts

SL front springs SSL rear springs with KYB shocks all round

Lumpy lid

Custom roof lining

JVC double din Dvd cd player

Fusion 6.5' splits

Boston generator 1000 10" sub

Alpine Vpower 350w amp

20Inch XHP Zen rims with khumo rubber

post-31633-1219826343_thumb.jpg

Edited by kx2fity
Link to comment
https://www.sau.com.au/forums/topic/233357-1000hp-r32-gtr/#findComment-4095158
Share on other sites

Would gladly swap my SS ute + cash adjustment for another 32 GTR:

Hey mate,

can you PM me a full list of mod's that the ute has got aswell as a few more pix???

how many k's has it done

condition?

how much are you looking at getting for the SS?

is it for sale anywhere on the net?

and what kind of change-over figure (cash adjustment) would you be looking at if you if i agreed to swap you for the GTR???

thanks

Link to comment
https://www.sau.com.au/forums/topic/233357-1000hp-r32-gtr/#findComment-4095540
Share on other sites

come on guys.

there are GTR's with half the power that i have that are selling for the same if not more money.

You will not find a GTR with this amount of mods and power and used as a every second day car in better condition......!!!!!!

Link to comment
https://www.sau.com.au/forums/topic/233357-1000hp-r32-gtr/#findComment-4114161
Share on other sites

  • 3 weeks later...

This GTR is a weapn!!! I've been in it before and it's tough as nails.

Sounds mean and goes hard.

Good luck with the sale Sal

I noticed u took off the AUTOSTYLE stickers down the sides.... Looks heaps better... More of a sleeper except that u can hear it at idle 10 blocks away ahahahahahahahaha

Link to comment
https://www.sau.com.au/forums/topic/233357-1000hp-r32-gtr/#findComment-4168324
Share on other sites

  • 5 weeks later...
come on guys.

there are GTR's with half the power that i have that are selling for the same if not more money.

You will not find a GTR with this amount of mods and power and used as a every second day car in better condition......!!!!!!

no disrespect mate but GTR's with 1/2 the power are stockers 380KW/2 = 190KW at the wheels

do you have a 1000hp dyno sheet?

Link to comment
https://www.sau.com.au/forums/topic/233357-1000hp-r32-gtr/#findComment-4232127
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Another question sorry, what stainless do u use in the turbo external WG plumb back piping? Is it 321, 316 or 304?
    • Right, its been a while for updating this car, but I made some small but important progress today. In the end I bought an Ecutek dongle from the Australian distributor Tunehouse (for local hardware support) but have gone with a remote tune from Racebox in the US (because they have done millions of these, and I could not find any tuner where I could access the tune anyway as they are all password locked). The App is reasonably easy to work with, but the PC software reminds me of Haltech's ECU Manager that you need to use with the Plat Pro ECUs, it is a nightmare.  Anyway, I sent the details over, got back a tune file and a request for data logs. I finally got a chance to access a private test track today as they want redline logs in 3rd and 4th, and have sent them back for the first round of reviews. The main difference in the tune is going from 1.0 (stock) to 1.3 bar (19psi), although I'm sure is a lot of other stuff in the background. Keeping in mind this is a dead stock car with 125,000klm, this is what the App's performance test claimed: Before After Interesting to note that both 400m tests had the same terminal speed (158klm/h) but different ETs. And no, the speed limiter seems to be higher than that at 186kl/h. Summary of the key logged parameters for the 3rd and 4th gear runs were: Those little turbos were certainly whizzing at 200,000rpm+.  Also I'm really not that excited about oil pressure 55psi at redline so I think I'll go thicker than 5w30 (nissan recommend 0w20....) and see if that improves it. Other than that (and the big boost spike....) everything looks good as a start to me.
    • Just one more post to show the final result and the original "janky" solution for a laugh. Everything feels really tight and no wobbling at all, very pleased 🙂
    • After drying a few days, time to put her back together 
×
×
  • Create New...