Jump to content
SAU Community

R32 GTST Headlight Globes & What Brake fluid to Use?

Mr R32 M-Spec

By Mr R32 M-Spec,
in General Maintenance

 Share

Recommended Posts

Mr R32 M-Spec Experienced

Mr R32 M-Spec

Posted
Posted

Hi, one of my globes just went in my car and was wondering are they the H1 style globes or something else. '93 GTST. I have a set of H1 phillips globes at home that I can put in if they are the same style.

Also I am bleeding my brakes out and refilling the fluid on saturday so to prepare for the track day coming up. what sort of brake fluid should I use as I have never had to top it up or refill it before

cheers mark

Roy Grand Master

Roy

Posted
Posted

Yes, globes are H1, and are as far as brake fluid goes i have always used AP Dot 5.1 and never had brake problems.

That said i recently went to buy dome more AP Brake Fluid from Race Brakes in wetherill Park and they no longer use/stock AP as they have found Caltex GP600 to be as good and cheaper.

A few people have comented its good for the track, and RB advised me that i can be mixed with my existin AP brake fluid.

Havent used the Caltex on the track yet and Wakefield eill be my first time using it instead of the AP so fingers crossed.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Murray_Calavera
      Should I use rust converter on this?

      By Murray_Calavera · Posted

      The easiest option might be to just spray a bunch of fish oil in there.  At least that way you can feel like you've done something while you continue to ignore it
    • GTSBoy
      WTB noltec r32 front upper (camber) arms

      By GTSBoy · Posted

      I'm firmly on the "zero compliance is good compliance" for FUCAs. I'd be looking to solid metal joints even if the primary reason for having them is because they facilitate the twist in the arm. I have never been more happy with the way the front suspension behaves than I have since I got rid of the FUCA bushes. Even the thin little (short lived) poly bushes in the Whiteline adjustables have too much compliance for my liking. It probably won't be long before I have sphericals nearly everywhere, probably including both top and bottom arms in the rear, and I'll start complaining about the increased costs for dental work. But I will be enjoying the driving more, I'm sure.
    • GTSBoy
      Brake pad Compound suggestion

      By GTSBoy · Posted

      Plus, you'll get great experience in bedding in pads!
    • Matvei27
      WTB noltec r32 front upper (camber) arms

      By Matvei27 · Posted

      I have offset Nismo brackets so the fact the gktechs can pivot is less important to me. I have 170mm JIC arms with bushings - but they provide no adjustment and I'm not sure whiteline eccentric bushings will fit them (I don't want to ruin the bushings currently in them to find out). Ideally I want something with bushings + adjustment; hence why I'd like to find a pair of these. Unfortunately they aren't easy to find.
    • Murray_Calavera
      Brake pad Compound suggestion

      By Murray_Calavera · Posted

      @Vee37 How much do you really care about finding these pads again? If your pads are quiet, work well and produce minimal dust, really isn't that enough? If you are set on finding the exact pads again, I suppose I'd do something like this -  Visit your local Jax, find out what brand of pads they carry. If the Jax workshop you previously went to had the pads on the shelf, then you can almost guarantee it will be of said brand.   I'm guessing you don't have the receipt for the previous work and pads. Can you visit a Jax workshop and see if they can look up your previous job to see what pads were fitted?  Still no luck? Put your stalker hat on, find the staff that used to work at the Jax store and ask them. Talk to local workshops, try to find out where the mechanics went to. Talk to Jax workshops, maybe they relocated to another workshop. When it comes to mechanics, its a small world. You'd be surprised how easy it is to track someone down. If these ideas don't work, shit will start getting crazy very quickly.... You could find out every brand and model of pad that fits that car... and try them individually ticking each off the list if it wasn't the one you were looking for.... If you go down this path your going to want to learn how to swap pads yourself, it is very easy, takes minimal tools and space. If you have room to park the car you have room to swap the pads. Plus you have the advantage of making sure all the brake hardware goes back in so they won't squeal! 
×
×
  • Create New...