Jump to content
SAU Community

Recommended Posts

  • Replies 133
  • Created
  • Last Reply

Top Posters In This Topic

will my wake field licence be good anough cause i dont really wont to renew my s2 cams at this stage. (and again i have to get the engine in first)

Sorry, CAMS L2S is minimum licence for SDMA - Wakie is ASSA and SDMA is CAMS

Licence can be obtained/renewed on the day at SDMA

I was told that was not the case now. You must be fully paid with CAMS before you are considered entered. You can finalise the paperwork on the day but the money must be paid prior.

Not that 2 days should stop anyone.

I was told that was not the case now. You must be fully paid with CAMS before you are considered entered. You can finalise the paperwork on the day but the money must be paid prior.

Not that 2 days should stop anyone.

Nope, you can get it on the day from the club... in fact they recommend it so that your 12months membership starts on your first race day. Just let them know thats what you're doing so they can have the forms printed/ready. Didn't you see all those Evo/Rex people getting their licences while u were at the last hillclimb?

I thought you can't get temp license for renewals....

Not sure which part you're referring to as a temp licence - The day membership is only for being a member of SDMA so you can try before you join or to cover off those who do not compete there often. CAMS is only for a year, SDMA will give you the CAMS 30 day temp licence (butt at the end of the page) to cover you until CAMS send your official licence through.

Both can be obtained on the day, but entry forms still have to be in on time (entries not accepted on the day) and let the Event Secretary know you are getting your membership and/or licence on race day when you put your entry forms in.

To compete you will need

1) entry forms in on time

2) SDMA membership (day or til June 30)

3) CAMS L2S licence (mimimum)

If you are a member of another CAMS affiliated club, it may be worth asking the President/Event Secretary if they will accept your entry without joining SDMA, however, its a good club to be involved in, they have been very supportive of me.

  • 1 month later...

post-33414-1223629534_thumb.jpgThe grand prize for the winner and proof of bragging rights for at least an entire year

Sunday 19th - Competition Day

Be there Sutton road

All payments to be made at least 2 days before the event.

http://www.sdmahillclimb.com/

So we have Reece, Donnon, Michele, Mark, Chris at least, who else?

Even if not competing lets get out there and support those that are.

Supras look to be bringing Kristel so far confirmed. It would be so funny to see the only person with enougth balls to compete was a woman.

I went to the homepage of sdma and clicked the link for entry forms, just about as it was to open up in pdf, i got a window saying file is corrupt and could not be repaired! can anyone help?

p.s. just to confirm, i can pay the $10 sdma membership and the cams license $95 on the day(when i get there), BUT you must fill out the form and pay the $70 by thursday?

Is this correct? or can i pay everything on the day even the $70 event charge wich means total $175.

The soonest i'll be able to pay if i enter is on wednesday night(15th).

Finally, an event where I'm NOT working on that weekend! I'll be there to cheer you lot on! (Dammit: why can't I have the beastie ready to kick some Supra tail...)

I went to the homepage of sdma and clicked the link for entry forms, just about as it was to open up in pdf, i got a window saying file is corrupt and could not be repaired! can anyone help?

p.s. just to confirm, i can pay the $10 sdma membership and the cams license $95 on the day(when i get there), BUT you must fill out the form and pay the $70 by thursday?

Is this correct? or can i pay everything on the day even the $70 event charge wich means total $175.

The soonest i'll be able to pay if i enter is on wednesday night(15th).

Try downloading again, worked for me. Save onto hard drive first if you have a slow connection.

Wednesday night is fine to pay by if EFTing it. I think you are correct about payment but please call Rob or someone from SDMA for confirmation.

I went to the homepage of sdma and clicked the link for entry forms, just about as it was to open up in pdf, i got a window saying file is corrupt and could not be repaired! can anyone help?

p.s. just to confirm, i can pay the $10 sdma membership and the cams license $95 on the day(when i get there), BUT you must fill out the form and pay the $70 by thursday?

Is this correct? or can i pay everything on the day even the $70 event charge wich means total $175.

The soonest i'll be able to pay if i enter is on wednesday night(15th).

You can either deposit all by Wednesday and fill forms on the day, or pay entries only and let them know when you email the entry forms (copy/paste deposit details in email) that you will be obtaining a CAMS licence and day club membership on the day. Print and sign you entry forms and take them with you to hand over in the morning (they have to have original forms with signature).

But you must have your entry forms emailed to them by closing date to run.

Everyone:

Anyone who would like to do this, but are feeling a bit uneasy and would like some support, please send me a PM and I'll give you a call and help where I can, because while it does feel a bit daunting at first, it really is a lot of fun and the club is very supportive.

Its affordable, its not too hard on your car (no different to any short bursts of spirited driving you may have done).

Don't forget your fire extinguisher, approved helmet (no obvious damage to helmet), standard seat belts okay but must be secure and work properly (not too frayed etc), check your steering wheel play is okay (not too wild). Some gaff tape over your positive battery terminal (if it doesn't already have a cover... another 5 second job)

I'll have some blue tape if you want to put a blue triangle on (battery location) on the day (5 second job).

Tyres can have some wear, but not completely bald (not as strict as rego)

I have a helmet you can borrow if you need.

I'm here, I'm happy to help, so please ask questions if you need.

You won't know what you're missing unless you try it.

Just DO IT!!!

OK, so i tried downloading it now onto my hard drive( the entry form from the home page of sdma), and still no good!

Once i open it, i get a window as mentioned, file is damaged and cannot be repaired, so i dont know what to do next?

I never had any issues with other files opening in the pdf software before... can someone try downloading the entry form again and see if it works for you, is there any other links besides the home page i can try downloading from?

cheers.

You can either deposit all by Wednesday and fill forms on the day, or pay entries only and let them know when you email the entry forms (copy/paste deposit details in email) that you will be obtaining a CAMS licence and day club membership on the day. Print and sign you entry forms and take them with you to hand over in the morning (they have to have original forms with signature).

But you must have your entry forms emailed to them by closing date to run.

Everyone:

Anyone who would like to do this, but are feeling a bit uneasy and would like some support, please send me a PM and I'll give you a call and help where I can, because while it does feel a bit daunting at first, it really is a lot of fun and the club is very supportive.

Its affordable, its not too hard on your car (no different to any short bursts of spirited driving you may have done).

Don't forget your fire extinguisher, approved helmet (no obvious damage to helmet), standard seat belts okay but must be secure and work properly (not too frayed etc), check your steering wheel play is okay (not too wild). Some gaff tape over your positive battery terminal (if it doesn't already have a cover... another 5 second job)

I'll have some blue tape if you want to put a blue triangle on (battery location) on the day (5 second job).

Tyres can have some wear, but not completely bald (not as strict as rego)

I have a helmet you can borrow if you need.

I'm here, I'm happy to help, so please ask questions if you need.

You won't know what you're missing unless you try it.

Just DO IT!!!

Bags the helmet and some blue tape :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I have copied the images in the original post from photobucket to the SAU servers to make sure they stay available.
    • Mate you saved be from dying in the Perth summer. AC wasn't changing direction and just going into diagnostics mode fixed it. You're a legend and I would shout you a beer if I could!
    • Unfortunately effort gone to waste, you will have substantial issues with how the manifold and wastegate have been integrated. You would be so much better off with a modified stock manifold like this: https://hypergearturbos.com/product/rb25detexgatedmanifold/   OR literally just getting a off the shelf Sinco or 6Boost manifold as myself and others have mentioned.  
    • Yuck. But it's kinda the same principle, moving timing around to make car run bad but sound good.... I went for a more spirited tuning drive to iron out a few things. Car no longer stalls, and it loved to dip RPM low when you clutch in. After tuning this (and the 4-5 tables that HPTuners/LS1 OEM ECU wants for idle air correction) it's now behaving somewhat normal. All expected because there's a new TB, new Intake manifold and that new TB which is 102mm vs 78... has an entirely different IAC passage which is smaller because ????? Unfortunately at this point I went to make further fine tuning changes to avoid it flaring up, you know... _tuning_ the HPTuners dongle died. Well to be more accurate - The USB cable died in a fashion that anyone who has ever charged a phone will recognize. After the app demanding I resync it 50 or so times (which all 'succeeded' but all failed) the device does not want to sync and I've logged a ticket with support to see if it's fixable. US Support said it was a 'storage issue' but after removing the SD card inside it and formatting it/fixing it the issue does persist. Unfortunately usually the fix is "Turn in your old dongle and pay $700 for the upgraded one" it's cheaper because I get some free licence credits I unfortunately don't need. However I'm 10 minutes down the road from HP Tuners AUS/VCM so at least I won't need to post it, and logged a new ticket for support over here. Definitely drives different. My SOTP dyno believes it's probably making 310-320kw instead of the 280 before.  It scrambles for traction a little now whereas it previously different. It drives like a bigger cam car up top even though the cam is smaller, likely due to the cam not being advanced 6 degrees. The timing is deliberately low and the fuel is very rich so who knows if this will improve on the dyno. It may, imperceptably. Also funny is removing the pineapples definitely makes the car squat more and axle tramp less. So this behavior of having more top end, squatting more, and scrabbling for traction more makes me think = more power. But I could have just been sitting on the threshold of that kind of behavior before. Time will tell if my butt dyno is calibrated right. I need the exhaust leaks fixed before dyno tune for obvious AFR related reasons - I repositioned the pipes but I'm not confident it's fully sealed even if it is better. At least the car does drive around while I cannot tweak/tune it for now. And I have aircon again. medium success!
×
×
  • Create New...