Jump to content
SAU Community

Recommended Posts

  • Replies 133
  • Created
  • Last Reply

Top Posters In This Topic

will my wake field licence be good anough cause i dont really wont to renew my s2 cams at this stage. (and again i have to get the engine in first)

Sorry, CAMS L2S is minimum licence for SDMA - Wakie is ASSA and SDMA is CAMS

Licence can be obtained/renewed on the day at SDMA

I was told that was not the case now. You must be fully paid with CAMS before you are considered entered. You can finalise the paperwork on the day but the money must be paid prior.

Not that 2 days should stop anyone.

I was told that was not the case now. You must be fully paid with CAMS before you are considered entered. You can finalise the paperwork on the day but the money must be paid prior.

Not that 2 days should stop anyone.

Nope, you can get it on the day from the club... in fact they recommend it so that your 12months membership starts on your first race day. Just let them know thats what you're doing so they can have the forms printed/ready. Didn't you see all those Evo/Rex people getting their licences while u were at the last hillclimb?

I thought you can't get temp license for renewals....

Not sure which part you're referring to as a temp licence - The day membership is only for being a member of SDMA so you can try before you join or to cover off those who do not compete there often. CAMS is only for a year, SDMA will give you the CAMS 30 day temp licence (butt at the end of the page) to cover you until CAMS send your official licence through.

Both can be obtained on the day, but entry forms still have to be in on time (entries not accepted on the day) and let the Event Secretary know you are getting your membership and/or licence on race day when you put your entry forms in.

To compete you will need

1) entry forms in on time

2) SDMA membership (day or til June 30)

3) CAMS L2S licence (mimimum)

If you are a member of another CAMS affiliated club, it may be worth asking the President/Event Secretary if they will accept your entry without joining SDMA, however, its a good club to be involved in, they have been very supportive of me.

  • 1 month later...

post-33414-1223629534_thumb.jpgThe grand prize for the winner and proof of bragging rights for at least an entire year

Sunday 19th - Competition Day

Be there Sutton road

All payments to be made at least 2 days before the event.

http://www.sdmahillclimb.com/

So we have Reece, Donnon, Michele, Mark, Chris at least, who else?

Even if not competing lets get out there and support those that are.

Supras look to be bringing Kristel so far confirmed. It would be so funny to see the only person with enougth balls to compete was a woman.

I went to the homepage of sdma and clicked the link for entry forms, just about as it was to open up in pdf, i got a window saying file is corrupt and could not be repaired! can anyone help?

p.s. just to confirm, i can pay the $10 sdma membership and the cams license $95 on the day(when i get there), BUT you must fill out the form and pay the $70 by thursday?

Is this correct? or can i pay everything on the day even the $70 event charge wich means total $175.

The soonest i'll be able to pay if i enter is on wednesday night(15th).

Finally, an event where I'm NOT working on that weekend! I'll be there to cheer you lot on! (Dammit: why can't I have the beastie ready to kick some Supra tail...)

I went to the homepage of sdma and clicked the link for entry forms, just about as it was to open up in pdf, i got a window saying file is corrupt and could not be repaired! can anyone help?

p.s. just to confirm, i can pay the $10 sdma membership and the cams license $95 on the day(when i get there), BUT you must fill out the form and pay the $70 by thursday?

Is this correct? or can i pay everything on the day even the $70 event charge wich means total $175.

The soonest i'll be able to pay if i enter is on wednesday night(15th).

Try downloading again, worked for me. Save onto hard drive first if you have a slow connection.

Wednesday night is fine to pay by if EFTing it. I think you are correct about payment but please call Rob or someone from SDMA for confirmation.

I went to the homepage of sdma and clicked the link for entry forms, just about as it was to open up in pdf, i got a window saying file is corrupt and could not be repaired! can anyone help?

p.s. just to confirm, i can pay the $10 sdma membership and the cams license $95 on the day(when i get there), BUT you must fill out the form and pay the $70 by thursday?

Is this correct? or can i pay everything on the day even the $70 event charge wich means total $175.

The soonest i'll be able to pay if i enter is on wednesday night(15th).

You can either deposit all by Wednesday and fill forms on the day, or pay entries only and let them know when you email the entry forms (copy/paste deposit details in email) that you will be obtaining a CAMS licence and day club membership on the day. Print and sign you entry forms and take them with you to hand over in the morning (they have to have original forms with signature).

But you must have your entry forms emailed to them by closing date to run.

Everyone:

Anyone who would like to do this, but are feeling a bit uneasy and would like some support, please send me a PM and I'll give you a call and help where I can, because while it does feel a bit daunting at first, it really is a lot of fun and the club is very supportive.

Its affordable, its not too hard on your car (no different to any short bursts of spirited driving you may have done).

Don't forget your fire extinguisher, approved helmet (no obvious damage to helmet), standard seat belts okay but must be secure and work properly (not too frayed etc), check your steering wheel play is okay (not too wild). Some gaff tape over your positive battery terminal (if it doesn't already have a cover... another 5 second job)

I'll have some blue tape if you want to put a blue triangle on (battery location) on the day (5 second job).

Tyres can have some wear, but not completely bald (not as strict as rego)

I have a helmet you can borrow if you need.

I'm here, I'm happy to help, so please ask questions if you need.

You won't know what you're missing unless you try it.

Just DO IT!!!

OK, so i tried downloading it now onto my hard drive( the entry form from the home page of sdma), and still no good!

Once i open it, i get a window as mentioned, file is damaged and cannot be repaired, so i dont know what to do next?

I never had any issues with other files opening in the pdf software before... can someone try downloading the entry form again and see if it works for you, is there any other links besides the home page i can try downloading from?

cheers.

You can either deposit all by Wednesday and fill forms on the day, or pay entries only and let them know when you email the entry forms (copy/paste deposit details in email) that you will be obtaining a CAMS licence and day club membership on the day. Print and sign you entry forms and take them with you to hand over in the morning (they have to have original forms with signature).

But you must have your entry forms emailed to them by closing date to run.

Everyone:

Anyone who would like to do this, but are feeling a bit uneasy and would like some support, please send me a PM and I'll give you a call and help where I can, because while it does feel a bit daunting at first, it really is a lot of fun and the club is very supportive.

Its affordable, its not too hard on your car (no different to any short bursts of spirited driving you may have done).

Don't forget your fire extinguisher, approved helmet (no obvious damage to helmet), standard seat belts okay but must be secure and work properly (not too frayed etc), check your steering wheel play is okay (not too wild). Some gaff tape over your positive battery terminal (if it doesn't already have a cover... another 5 second job)

I'll have some blue tape if you want to put a blue triangle on (battery location) on the day (5 second job).

Tyres can have some wear, but not completely bald (not as strict as rego)

I have a helmet you can borrow if you need.

I'm here, I'm happy to help, so please ask questions if you need.

You won't know what you're missing unless you try it.

Just DO IT!!!

Bags the helmet and some blue tape :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi. A little bit of an update. It maybe(hope not) looks like i would need a new tranny(it would be "maybe" a cheaper or better option anyway) So i need some info. I know i need a different propshaft(i can make custom one) LSD is not a problem cuz the engine will be still(for now) N/A RB20. So if i buy RB25DET NEO tranny...is there something else i need? I read something about push/pull type but i do not know if i need to "change" something or i can just plug n play onto my engine a go? Thanks for the advice  
    • Good morning all, Bit of a random question but figured I’d finally throw it out after wondering for a long while. Before I start, I'm hoping to do this purely out of personal preference. I think it would look better at night, and don't mind at all spending a few hours and dollars to get it done. I've copied this from a non-Skyline specific forum, so I apologize for the explanation of our headlight switch setup that we all know. Here we go: Zero lights (switch off) Parking lights (switch position 1) being a rectangular marker on the outside of the housing, my low beam being the projector in the centre (position 2), and a high beam triggered by my turn signal stalk. Most North American cars I’ve owned of this era have power to the amber corner (turning indicator) light as part of the first switch (parking lights). I’d love to have these amber corners receive power when the headlights and parking lights are on (headlight switch), yet still blink when using the turn signal which is of course a separate switch. Hopefully I’ve explained my question correctly. Is anyone aware of a way in which I might be able to achieve this? Thanks in advance
    • My heads are cathedral port! It's likely possible, but I don't want to add any extra moving parts (I know they don't move) between the heads, manifolds, etc. It will also affect how injectors/fuel rails etc sit and I don't really know if it would change how the FAST manifold goes/sits/fits. I have the LS6 steam pipes already as I have a very late LS1 block so it should be fine. I couldn't find anyone who had ever actually used one for this purpose, it seems 100% of people grind the water pump. The thermal spacers are 12mm and are half way to the cost of the newer water pump anyhow... so if it comes to that I suppose I'd rather buy a new pump. The bearing in the pump I do have is a little.. clunky, but it hasn't done that much time and I never noticed it when the car was together in the past few years, so..
    • The bushing has failed, not all that uncommon for a car of this age.  Any mechanic should be able to push in a new bushing for you, or you can probably buy the entire lower control arm, complete with bushes.
    • Could you not use "thermal" spacers to give the clearance, like the ones I used between the blower and head? That raised the manifold height by around 10-15mm Albeit the ones I used were for cathedral ports, but I assume they have similar for rectangular ports????
×
×
  • Create New...