Jump to content
SAU Community

Recommended Posts

Item: RB26 Power FC

Age: Unknown

Condition:Excellent

Price: $800 plus post

To Fit: R32/R33 GTR - Can be modded to suit RB20 if buyer is keen, at extra cost.

Location:Hoppers Crossing, Victoria

Contact: Reply or PM

Comments: Comes with Gold 'Limited Edition' D1 Hand Controller

Item: Z32 Air Flow Meter

Age: Unknown

Condition:Working Order

Price: $200 plus post

To Fit: Most Nissans

Location: Hoppers Crossing, Victoria

Contact: Reply or PM

Comments: Comes with Plug

Item: Exedy Brass Button Heavy Duty Clutch

Age: 1000kms old

Condition:Next to Brand New

Price: $600 plus post

To Fit: Most Nissans - Rb20/Rb25/Rb26/Rb30 - Push Type Clutch/

Location:Hoppers Crossing, Victoria

Contact: Reply or PM

Comments: Comes with Custom Pressure Plate (Cant remember Specs) & Matched Flywheel (Machined when clutch was installed) -

Complete with all bolts required. and Trust Bearing. Was Removed for Auto Conversion.

Clutch plate has 8.04mm left of material after 1000kms - Exedys listings state they are only 8mm from factory

Thanks for looking. Will post pics ASAP.

Can Post at Buyers Expense.

Can do drop/deliverys in Melbourne Area - PM me.

  • 2 weeks later...

Do you still have the AFM & Plug - whats the best you can do - how's $120.00 and i'll come pick it up tomorrow cash..

Cos you dont know what condition its in.. Have a think and let me know,,

Cheers.. Im just in FootsCrazy so not far ..

Dee..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Adjusting the idle screw is usually (emphasis on usually) just covering up deeper issues. Stuff like the cold start valve not closing properly. Throttle shaft seals on the way out. Coolant temp sensors getting out of spec. Coolant temp sensors especially can be a bear to diagnose because they can fail subtly. My dad just spent weeks chasing down his high idle. He cleaned the coolant temp sensor and everything but the resistance curve just drifts over time and if it's been 20+ years they also get super slow to respond as well. Has a massive effect on fuel economy as if it's off the ECU is going to run richer and command high idle for far longer than it should otherwise.
    • How old is the battery, it's more likely your battery is on its way out.
    • I reckon you'd get 90% off. My washer doesn't get between spokes very well. Haha! I love my Gerni!  Argh! Steam cleaning has its place for sure.
    • Hey all, I did a voltage test with the car (video attached) not running for 3 days. And here is some interesting stuff: - Battery voltage is 12v (I had the key in the ON position) - Drops to 9.76v while cranking then quickly goes up to 14.5v - You will notice there was a sorta slow start but not as slow as it usually is. - Idle surprisingly was better at just over 1,000rpm instead of 1,100 rpm. - I turned on the A/C, radio and headlights in the video and the voltage remains the same - I haven't cleaned the grounding wires on the chassis yet, that's next. - Battery drops to 12.6v when I turn off the car and wait a bit Seems like I might have a parasitic draw? I do have an immobiliser system which does drain the battery more of course but was wondering if there is anything else I should be looking at fixing? Does the ground wires on the chassis have anything to do with the low 12v?        SAU.avi
    • My lord that is some low oil pressure as minimum in the manual! I guess the big part will be seeing how it changes as the engine gets more spirited use.
×
×
  • Create New...