Help With Turbosmart Bov Vee Port

[HTMR32]

Hi,

I brought and installed a Turbosmart BOV Vee Port on a R33 GTSt,

I dont understand the softer and harder adjustment what is it meant to be on,

when i have it on soft the car feels like it is going to stall on me,

when i have it on hard it is almost like the soft.

can someone help me with this problem,

keep in mind that this car is stock boost and auto

[Amec]

sounds like you have introduced a boost leak somewhere when you installed the BOV.

[BezerkR32]

harden it until it does not want to stall after a rev. should see valve close before rpm settles back to idle

Hi,

I brought and installed a Turbosmart BOV Vee Port on a R33 GTSt,

I dont understand the softer and harder adjustment what is it meant to be on,

when i have it on soft the car feels like it is going to stall on me,

when i have it on hard it is almost like the soft.

can someone help me with this problem,

keep in mind that this car is stock boost and auto

[mafiouso]

r33?

is the stock BOV still fitted?

did you block it?

also bov can stuff with the AFM thats why u can get backfires on grear change

[HTMR32]

How can you fix a boost leak

[r33cruiser]

keep it on topic mafiouso i cant be stuffed reading another atmo bov is the devil thread.

check the vac hose going to the top of the bov.

check that the adapter flange for the bov it is firmly sealing against the intake pipe.

check that your have stuck the plug in properly into the return hose.

this should have been the only thinks you would have touched to install it.

Edited August 28, 2008 by r33cruiser

[R31Nismoid]

I reckon end of the day its because its ATMO BOV.

Stalls when soft, stalls when hard, all the markings of changing from the stock item and using the stock ECU etc