Bride Seat Rail

[noisia]

i bought a MO type bride seat for my Ergo and the allen key bolt that bolts the rail to the seat cannot be bolted in due to the "tube that u pull up to slide the seat back or forward is in the way" i cant explain it any other way i dont think. is there a way i can take off that "tube rail" so i can bolt everything up, then after its all secured to the seat i can re-install it?

Edited August 29, 2008 by noisia

[75coupe]

so your seat bracket is hitting the rail sliding lever?

Move your seat back a little, would that fix it...?

[75coupe]

Are you using the right bolts in the right places? as I know when I was installing my bride rail there were alot of bolts and they all fitted in specific holes for a reason...

[noisia]

sorted. had to use some foreign nuts though, couldnt get my alley key in between the rail and the seat when it was bolted up, and the nuts the bride come with have plastic coating on the inside thread which grips to much and spins the alley key bolt before its tighten up, so i used some bog stock nuts which dont grab until the end of the thread.