FS: Kicker KX400.1 monoblock amplifier

[ultim8DTM5]

Hi all,

I have two of these but I have bought a new sub, so I will only need one.

Kicker KX400.1 monoblock, single channel subwoofer amplifier.

Let's face it: you're achin' for bass. And with Kicker's KX400.1, you'll get bass in spades! This Class D subwoofer amp pumps out 200 watts of pure Kicker power to help your sub send you to low-frequency paradise.

You can tune your bass with the built-in low-pass crossover (variable 50-200 Hz at 12 dB per octave) to best suit your vehicle's acoustics and your tastes. Subs also often waste energy trying to reproduce ultra-low frequencies (way out of the range of hearing) — that's why the KX400.1 is outfitted with a 25 Hz subsonic filter, which keeps those performance-robbing frequencies away.  

For even more bass, you can dial in the KickBass boost for up to 18 dB of hard-hitting bass at 40 Hz. Kicker even includes a dash-mountable remote bass level control that makes on-the-fly adjustments a snap. If you'd like to add a KX400.1 to your system, but have a factory receiver with no preamp outputs, no problem: simply hook it up with the speaker-level inputs. For multi-amp system expansion, take advantage of the built-in preamp outputs to make installation easier.

Key Features

200 watts RMS x 1 at 4 ohms  

400 watts RMS x 1 at 2 ohms  

variable 50-200 Hz low-pass crossover, 12 dB per octave  

25 Hz subsonic filter, 12 dB per octave  

efficient Class D amp design  

0-18 dB KickBass bass boost at 40 Hz  

amp can be strapped to another KX400.1 to power one 4-ohm subwoofer (800 watts total power)  

dash-mountable remote bass level control  

speaker- and preamp-level inputs  

preamp outputs  

frequency response 20-200 Hz  

4-way protection circuits  

requires 4-gauge power and ground leads — wiring and hardware not included with amplifier  

12-13/16"W x 2-9/16"H x 10-3/16"D (including removable shroud); 10-1/16"W x 2-5/16"H x 9-9/16"D (without shroud)  

Comes with birthsheet, actual bench tested power is 470RMSx1@2ohm.

Heatsink has been custom painted in Chromalusion as seen in the pic, prior to painting looked like this:

Aust. RRP is $759 (listed by official Australian distributor CustomCar)

$350 firm

Available in a fortnight, will ship interstate at buyer's expense.

[Nrage33]

dude...where are u located?

seriously considering this amp of yours