Jump to content
SAU Community

Recommended Posts

Hi all,

Over the last year and a half I have been engaged in the rebuild of my R34. During this time we have spent a lot of time and effort adding small touches here and there to make things a bit more unique. Some are specific, and others are more generic (i.e. for everyone)

One such part that we came up with was a replacement diagram for the R34GTT Fuse Box cover. With a car that is now 10 years old, general wear and tear has seen that yellow diagram fade / disappear. Time for a replacement - something which adds those so-called style points whilst keeping functionality. Abo Bob already had a 1:1 scale image of the diagram so we borrowed that for this project, thanks Adam!

Business Details:

Ann Harris

K-Bar Laser Etching

http://k-bar.com.au/

All our initial designs involving this technology were sent to numerous suppliers around Australia. Ann came back with the lowest quote from everyone, and was happy to assist with material choice, artwork and other recommendations. In total, around 20 suppliers were contacted and these guys were by far the best deal for our purposes (i.e. once off designs and productions)

What's on Offer

Well I'll let the pictures below do all the talking and you can decide for yourselves. Please excuse the blacked out sections, they are specific to our project and we would like to keep that private for now. Also note that the avatar image, along with the "SATANIC" text in the top right corner will be removed in the Group Buy Version.

post-19974-1220098270_thumb.jpg post-19974-1220098289_thumb.jpg post-19974-1220098310_thumb.jpg post-19974-1220098323_thumb.jpg post-19974-1220098337_thumb.jpg post-19974-1220098350_thumb.jpg post-19974-1220098362_thumb.jpg post-19974-1220098380_thumb.jpg post-19974-1220098478_thumb.jpg post-19974-1220098497_thumb.jpg post-19974-1220098510_thumb.jpg post-19974-1220098528_thumb.jpg post-19974-1220098549_thumb.jpg

Specifics

Material: 3mm Metalgraph Plus (brushed stainless look)

Etching: All etching will be in BLACK (no exceptions)

Holes: No mounting holes will be included; please drill your own else just use strong adhesive

Care: Minimal care is required, this material is scratch proof - an odd wipe wouldn't hurt though

Pricing:

I only got my stuff finalized and delivered on Friday so I don't have a confirmed pricing yet (Ann still working this out). On initial conversation I was aiming around $50 per unit delivered - my unit cost was $85.00 FYI. This will be based on a production of 10-20 units, the final number is still to be confirmed.

Confirmed:

1. Abo Bob

  • Replies 108
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

OK so the following are confirmed:

1. Abo Bob

2. DECIM8

3. mrgtt

4. R34GTFOUR

In reply to the last post, I am planning to just have the following text on the top right corner (should suit everyone)

(first line) NISSAN

(second line) SKYLINE

(third line) R34

As stated, there will be ONE design to be made in bulk, will not do individual designs for group buy (too complicated, if you're that keen, contact me via PM). So for you who are interested, please come to some concensus as to what you would like (limit to 4 lines of text)

The section where my avatar image is, will just be blank.

Stan

News just in boys n girls:

Quote for Stanley Choi

Laser Etched Metalgraph Fuse Box Cover – approximate size 160mm x 208mm.

Quantity of 10 - $65.00 each Total $650.00

Quantity of 20 - $60.00 each Total $1,200.00

All prices are GST inclusive, include freight and minor changes where required from your original plate.

Any major change to the Fuse Box Cover will incur an additional charge.

All quotes valid for 30 Days.

If you would like to place an order, please call.

Regards,

Ann Harris.

Business Manager.

There you have it, the final pricing on these plates. It's a bit more than my projected $50, but it's still a saving of $20-$25.00 on the plate which is about 25%. Turnaround time is very good with these guys, once order is placed it is usually made same day and sent out following.

Thanks

Stan

65 still isnt too bad im fine with that price, with the r34 in that square i wouldnt mind having a logo of choice but i recon it would just be easier if we all got R34 what does everyone else think?

Im fine with $65

As for the layout im happy with everything mentioned as far as R34 taking up the box where you symbol was but could i have

First line: NISSAN

Second line: SKYLINE

Third line: GTFOUR instead of GT-T (obviously because mine isnt a gt-t :huh: )

I dont mind paying a little extra for the headache for the last line purely because gt-t would look silly in mine :D

1. Abo Bob

2. DECIM8

3. mrgtt

4. R34GTFOUR

5. jeffboyracer

6. slats

R34GTFOUR, I'll talk to Ann about it - shouldn't be a problem I hope.

So it's the following for the right corner:

NISSAN

SKYLINE

R34 GT-T or R34 GTFOUR

Still need concensus on the left box... else it'll remain blank and you can get your own little vinyls made up to stick there :huh:

Well im obviously in for R34

Id prefer it written in the font "IMPACT". Ive actually replicated what it will look like below. Most dominant feature.

R34

Personally I dont care what it says in the top corner.

I wouldn't mind

NISSAN

SKYLINE R34

RACE BRED 2.5L

Then you can have them all printed the same to suit all.

Edited by DECIM8

Yep I am in too.

A better idea would be to have the GT logo in the square where your avatar is - as per the shield design badge on the front guards - that would look awesome! The GT logo is common to all turbo and non-turbo models, so would be perfect and look great.

1. Abo Bob

2. DECIM8

3. mrgtt

4. R34GTFOUR

5. jeffboyracer

6. slats

7. Nightcrawler

Current Group Buy Price: $65.00 all inclusive.

Current Design:

[TOP RIGHT]

NISSAN

SKYLINE

R34 GT-T or R34 GTFOUR

[AVATAR BOX]

R34 or GT Logo

Will need a vector of the GT Logo, otherwise that won't work.

1. Abo Bob

2. DECIM8

3. mrgtt

4. R34GTFOUR

5. jeffboyracer

6. slats

7. Nightcrawler

8. raps86

Current Group Buy Price: $65.00 all inclusive.

Current Design:

[TOP RIGHT]

NISSAN

SKYLINE

R34 GT-T or R34 GTFOUR

[AVATAR BOX]

R34 or GT Logo

Will need a vector of the GT Logo, otherwise that won't work.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I replaced the whole clutch line with the chase bays braided hose, I think it removes that loop, is it the short hose that comes immediately off the slave or is there a drawing in the manual to find what you’re referring to? It was just re-bled when I upgraded to the nismo slave, old slave worked fine but I thought that might help, didn’t change a thing. It’s like the first half of the pedal is pushing air and then when it finally actuates the master the friction zone is tiny. Makes it practically impossible to launch the car
    • Yep, that was one of the things we learned fast in the past with our MX5. When you drive with the top down, you are effectively standing out in the sun, 100% of the time, and not getting in any shade (because roads aren't shaded generally!). Just like standing out in the middle of a field on a sunny 27C day is a bit of a bad plan, so is sitting in a MX5 without sun protection.
    • I also just ordered some Frankenstein bolts and side mounts to fit a hard top Just in case I do find one, basically so it doesn't need to be fixed to the car with only the front latch.......and then gaffa tape to keep it in place for the RTN journey from wherever I get it
    • If your temps are fine now, you probably won't have any issues with where your vents are as they don't look right up at the windscreens high pressure area, so any differences when giving it the beans for extended happy laps would be minimal, but, they should vent heaps when stuck in traffic  Much like how that reverse cowl on my SS let "visible" heat out when stationary, but, because it was basically at the windscreen my coolant temps on the Hwy actually raised because air was being fed into it at speed (110kph), to only come back down to around 90° when I got off the Hwy And your 100% correct about the NC currently not needing vents, but, if I was to add a turbo, and a oil cooler and intercooler in front of the condenserand radiator, and then take it to the track???? It is apparently a recommend requirement if I don't want to worry about coolant or oil temp issues, but, any of the above are possible scenarios, over time As it sits now, with the triple pass radiator and stock air conditioning system, I have absolutely no issues with either temps or air conditioning efficiency, I've been basically daily driving thie car for the last month, both on the Hwy, and peak hour, bumper to bumper traffic, but, that's pretty much expected from basically a standard engine  Talking about no issues daily driving, it was 39° the other day and I was sitting in bumper to bumper traffic on the M5 and then M7, with the top down, and with the air conditioning blowing nice cold air on my feet, balls, and face, well, there was one issue, my head and arms got pretty sun burnt Note to self: leave a hat and sunscreen in the car for such days 🤣
    • I would agree, unless you need something specific to the HV motor/battery side repaired or investigated, any mechanic will be able to perform normal services, but if you prefer, maybe look for a mechanic who regularly services/repairs Nissans, the VQ engines are pretty common in the Nissan lineup.  Sorry, I can't make any suggestions, I don't live in Vic.
×
×
  • Create New...