Jump to content
SAU Community

Recommended Posts

Hey all, I'm a proud owner of a S1 RS260 Stagea.

I'm getting mixed answers about what kind of gearbox is in my car.

I was under the impression it was a R32GTR gearbox, as the motor is also from R32/33GTR.

Yet I have been told its a "Stagea 5 speed gearbox"

Which is it?!?!?!

Can someone please clear it up for me, as I am about to start looking around for a new clutch and gearbox parts.

Any help muchly appreciated.

Link to comment
https://www.sau.com.au/forums/topic/234031-confused-about-gearbox/
Share on other sites

the S2 RS4S has the R33 GTR gearbox (this would constitute a stagea 5 speed box?!?!?).

it is hard to believe it would be anything other than the same for a 260RS made during the same time as the R33 GTR.

I was told that the motor in a Series One RS260 is from a R32GTR and the motor in a Series Two was from a R33GTR. so technically (please someone correct me if I'm wrong), the part numbers for a R32GTR gearbox should be identical to those of a Series ONE Autech Stagea?

I'm trying to chase up synchros and selector forks.

according to FAST, all 260RS boxes are same, 32010-12U60, which is the identically same box on the last of the R33 GTRs, not all, from May 98 to November 98. R33 GTRs before this have various other part #s, but it is probably minor changes and the bulk would be identical. If you use FAST you can get the correct part you want.

further FAST research shows that gearbox 32010-12U10 were from early 97 to mid-98 on both 260RS and R33 GTR and then changed to 32010-12U60 after mid-98 for both 33 and 260. Nissan says that 12U60 is an alternate part for the 12U10, so again, prob very minor changes.

post-780-1220162683_thumb.jpg

actually its even easier than that if you are looking for gearbox rebuild kit....nissan are out of stock of the early setup, only the late (series 3) r33 gtr bits are available

So in summary, it is definatelly a R33 GTR gearbox. I'll let my mechanic know so he can price up some parts for me.

Thanks for your help guys, much appreciated!

Nigel.

That's good to hear! From what I read on here, the series 3 R33 GTR has the strongest of the GTR 5 speed gearboxes :(

I can't remember the differences. Triple synchros or something (I don't know gearboxes very well)? A search should find the differences.

further FAST research shows that gearbox 32010-12U10 were from early 97 to mid-98 on both 260RS and R33 GTR and then changed to 32010-12U60 after mid-98 for both 33 and 260. Nissan says that 12U60 is an alternate part for the 12U10, so again, prob very minor changes.
I was told that the motor in a Series One RS260 is from a R32GTR and the motor in a Series Two was from a R33GTR. so technically (please someone correct me if I'm wrong), the part numbers for a R32GTR gearbox should be identical to those of a Series ONE Autech Stagea?

I'm trying to chase up synchros and selector forks.

I never heard of any stagea model using any parts at all from a R32GTR. Pretty sure both s1 & s2 share parts with the R33 GTR.

Anyone have any other info?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • All I can say Duncan is good luck and I hope that Neil did not run any E85 in Cheryl. I have recently experienced the full spectrum of fuel tank issues in my R33's that had been caused by E85 and contaminated fuel. When you take the cover off the top of the tank and have a look inside you will get an understanding of how easy it will be. Best case situation is clean fuel with minimal contamination. My GTR was like this and it was a very simple operation to just grab the fuel pump carrier bracket and slide it up and out of the tank. My three GTS_T's had different levels of fuel contamination that was probably caused by E85 in the fuel.  In the worst case all of the metal components in the tank had rusted to the point where there were pieces of rusted metal swirling around in the tank. This required the removal of the exhaust, the tailshaft, the complete rear cradle and the fuel tank. The components in the tank were that rusted that it took days to get the fuel pump carrier and the mounting brackets out of the tank. When the tank was finally cleaned, everything inside the tank had to be replaced. With the tank all back together I could then reinstall it in the car along with everything else that had to come out. Good luck and I hope that you find a clean tank.    
    • It is a two door. It is black and also still has the OEM wheels and stereo. Exact model would be KR_R32RGFEL_SS According to GTR-Registry.com is a 2 Door Coupe; RB20DE; 2WD no HICAS; MT.F5; (11L) Projector Headlamps and Fog Lights; (12_) Electronic Active Full Auto Air Con (Climate Control); (13-14SS) V Selection -- Which seems to be accurate description of my variant. Will try to upload a few pictures soon. The OEM wheels look like the below image. Image is taken from the goo-net-exchange website.  
    • Time: Saturday 18th January - 9am -10:30am Where:  Cafe By Lamanna 10 English St, Essendon Fields VIC 3041  - https://g.co/kgs/mhVKvAB Registration: So we can give the cafe a heads up on rough booking numbers please rsvp below Registration Link: https://forms.gle/wPtfj9Gp8bvCiouo8
    • Welcome Gabriel. At least your car has a glorious RB and not the shitty CA18. As MBS206 mentioned all the good bits can be added later. Two doors or four?
    • And half of them have been converted to turbos.
×
×
  • Create New...