Jump to content
SAU Community

How To Change Plugs In An R33 Gtst Series 1

uneek

By uneek,
in General Maintenance

 Share

Recommended Posts

uneek Enthusiast

uneek

Posted
Posted

Hi Guys

Just bought some NGK iridium plugs for my series 1. The link to the guide for changing plugs in the Maintenance sticky does not work any longer. Can someone pls point me in the right direction for a step-by-step guide? i.e. what parts need to be removed to get to the plugs etc and anything to keep an eye out for? The attendant said these plugs are pre gapped and I dont need to worry about gapping them. Im running only about 5 PSI if that makes a difference.

Cheers

Bennett Mentor

Bennett

Posted
Posted

1. Remove the intake pipe that goes accross the top of your engine and all the vacuum lines that connect to it.

2. Remove the coilpack cover in between the rocker covers.

3. Unclip the coilpack loom from each coilpack and put it aside.

4. Remove the coilpacks either by uncwrewing each one seperately or by undoing the bolts holding the brackets underneath the coilpacks.

5. Use a spark plug remover on a ratchet to unscrew the plugs and repace with your new pre-gapped plugs. They will be hot if you have been driving.

6. Now work back up the steps and attach everything in the same way you removed it.

Hope that helps. Its really easy just dont be afraid to get in there and do it yourself :huh:

bozodos Grand Master

bozodos

Posted
Posted

from experience, it's easier to unbolt the bracket holding the coilpacks in, but make sure not to overtighten it when putting it back on like I did, snapping the head off one of the bolts in the process :wub:

I also don't bother to take the entire coilpack harness off, there's plenty of room to work around it.

W0rp3D Grand Master

W0rp3D

Posted
Posted
Hey i just noticed for step 4 im missing the male end of that plug? is that a serious problem? and what is that plug for?

STRESSING out!

I think that is actually a S2, since yours is a S1 you will have an ignitor (i think thats what its called) pack mounted there that the wires plug into.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • r32-25t
      2025 Osaka Auto Messe

      By r32-25t · Posted

      I’d love to find some where that can recover the dashes to look brand new and original. Mine has a very slight bubble, nothing compared to some I’ve seen though 
    • Rezz
      2025 Osaka Auto Messe

      By Rezz · Posted

      $170K. I asked one of the guys there as a joke if that price was just for the passenger seat as it was where the price sheet was... he tried really hard to crack a smile 😄 He also mentioned that every single part of the car was inspected and either restored or replaced with a new or as new part, or made from scratch. The interior was incredible, every inch like a new car.
    • Dose Pipe Sutututu
      R32gtr sputtering and stalling

      By Dose Pipe Sutututu · Posted

      Time for a modernisation, throw out the AFM, stock O2s, ECU into the e-waste bin. Rip out the cable throttle, IACV, pedal, etc. into the scrap metal bin. DBW, e-throttle, modern ECU, CANbus wideband, and the thing will drive better than when it left the factory.
    • MBS206
      R32gtr sputtering and stalling

      By MBS206 · Posted

      I agree, don't go trusting those trims. As I said, first step is to put the logger away, and do the basics in diagnosis.   I spend plenty of time with data loggers. I also spend plenty of time teaching "technicians" why they need to stop using their data loggers, and learn real diagnostics.   The amount of data logs I play with would probably blow most people away. I don't just use it to diagnose. I log raw CAN data too, as a nice chunk of my job is reverse engineering what automotive manufacturers are doing.
    • joshuaho96
      R32gtr sputtering and stalling

      By joshuaho96 · Posted

      I'm aware, but unless you're actually seeing the voltage the ECU is seeing and you're able to verify the sensors are actually working I find it hard to just trust STFT/LTFT. I will say, logging the ECU comes naturally to me because it's one of the lowest effort methods of diagnosis and I do similar things in my day job all the time. Staring at 20+ charts looking for something that isn't quite right isn't for everyone. NDS1 allows you to log almost everything so that's normally what I do and then sort out the data later. 
×
×
  • Create New...