Jump to content
SAU Community

Recommended Posts

I'm coming up with a design at the moment Steve, and I'll work through it with Daniel. I basically want a rectangular unit that will fit into the spare wheel well, with a perspex removeable lid, like the one attached.

sprinter boot isnt it?

mate made one for his brothers ae86 running the 1JZ - curved surge tank to match the wheel well and had the lines exiting the side of the well, then sealed up.

33 boots are not round like the pic above, they are more square and have a step in them that would make the use of a single sheet to cover it bulky.

33 boots are not round like the pic above, they are more square and have a step in them that would make the use of a single sheet to cover it bulky.

get a torch out and lightly heat it so you can bend it.do it one more time to finish the step. worth a shot :)

Hey Chris, the example was a sprinter boot, and the champagne coloured boot is a 180SX boot, which is what I want to get the enclosure made for.

I have a small, square surge tank which is only about 150mm high so I could fit it into that area.

  • 2 months later...
hows this coming along?

i need a new little project to make up at work?

i just need to knwo what it consists of! lol

we just wanted to replicate the one in the first post. Just alloy sheet folded n stuff with a perspex cover. and a few fittings welded on so the fuel can get in and out and the smell stays in.

Chard on here was going to make me one, but due to issues at his work has taken too long so I'm looking at more sources now.

I'm speaking with Daniel (Activ32), but if you want to make it Blaq let me know.

This is what I'm after, but dimensions can change slightly if it would suit more people. Just an ally box with a perspex lid, pretty simple.

So whoever want to do it let us know! Car is nearing completion and I want as soon as I can get it done for a reasonable price.

post-8405-1227823471_thumb.jpg

Just measured that up in my boot and that box is huge, i will most likely want only want a 300 deep, 450-500 wide, (what ever height a std surge tank is ??? 400-450),

with 3x jic male to male fittings welded in the side.

I spoke to my mate today that does all folding and cutting i need in alloy, he is willing to make these, with lexen lid or folded section like original picture.

About $175 each for the dimensions given by Phunky_monkey - plus shipping to Melb of course.

all folded , welded, recessed and Nut-serts and Allen key bolts.

Ryan - no need for the male to male fittings as that defeats the purpose as the connections are still outside of the box.. but can be done if you get the fittings needed to pass through 2.5mm alloy

Chris, thats cool but whats going to stop the smell getting out? The hoses will still need to go into the box some how. If you use proper jic fittings on the correct hose you will not get any smell outside the box.

then technically you dont need a box then :ninja:

the whole point of the enclosures really is for legallity - they must be seperated from the cabin by something... so if you have exposed hoses, your not going to get away with it on an ADR perspective. the correct hoses would remove fuel smell by default.

are you using JIC and not AN fittings? havent really seen JIC available many places.

My own system is mounted along the boot where the battery used to be, i'll be flanging it down to the stock fuel inspection cover so its totally sealed from the cabin, without anything exiting the sides of teh enclosure other than wiring.

any way you go, you will need to run grommets through the side of teh box, Jaycar have some great 3 piece screw on grommets than are waterproof (so leak proof for vapor)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • @joshuaho96 Hmm considering the drama you've seen/experienced, have you looked into getting a built complete long motor shipped from Australia?  Considering the AUD is basically monopoly money when compared to the USD, at a glance this seems like a good option?
    • Bloody Skylines, they put you through the bloody wringer! Stick at it! Stunning drag strip BTW! Where is it? Can see part of the name on the slip and probably should just Google it!
    • I mean the other day I had to walk someone through diagnosing why their timing belt was walking off the cam gears. At least one of the issues was a bent tensioner stud. Local mechanics have found runout on the CAS mechanism causing weird failures. I'm also no saint here I've documented some of the things I've had to learn the hard way. Something I discovered recently is that my CA emissions catalytic converters weren't even welded correctly to align the downpipe to the main cat and they tossed the support bracket that goes from the transfer case to the downpipe to support everything there. I spend a lot of time chasing down these decidedly unsexy problems and the net effect is it feels like I never actually get to the original objective (flex fuel, VCAM, oil control, cooling, etc).
    • At times with how you make everything sound, all I imagine Americans doing when they see a gtr is standing there looking at it and bashing it with a gun like how a caveman would with a club and hoping it fixes itself 
    • I think this is just a product of how the US market works for this stuff. Shops are expensive and there's no real way of knowing what kind of results you're going to get, people don't really have the institutional knowledge. I have heard too much at this point to really put faith in anybody "full service" except maybe DSport and they aren't really a full service kind of shop. If you go to the right place I have no doubt they'll get it right for you. Some locals have set it up right but the cost really is nuts and even now they're still fighting issues. And you know I'm a crazy person who thinks things like twin scroll, relatively short low-mount cast headers, PCV recirc to intake, recirculating BOV, right-sized for ~400 whp, MAF load, validating all of that to a standard comparable to OEM test programs, etc are relevant. For what it's worth, multiple local owners at this point have been stuck in a perpetual cycle of blowing a motor -> getting someone to rebuild it -> some missed detail causes the bearings to wipe and spin just outside of break-in mileage or drop valves or some other catastrophe -> cycle repeats. I usually only find out about this because I'm perpetually helping random friends with diagnosing car troubles, Skyline or otherwise. The single turbo stuff if I'm honest is mostly secondary, it just doesn't seem to achieve the numbers in the ~2000-3000 rpm region that I would expect given the results I've seen here or in Motive's videos. I don't really know what we're missing here in the US to be causing this. Lots of people like to emphasize the necessity of finishing the project first and foremost, but I'm not made of money and I can't afford to be trashing a 15k+ USD engine build with any regularity. Or spending my relatively limited garage time these days unable to triangulate problems because too much was changed all at once. Also, even if it isn't a catastrophic failure I would consider spending the cost of single turbo conversion with nothing to show for it to be pretty bad. 
×
×
  • Create New...