Jump to content
SAU Community

Recommended Posts

  • Replies 321
  • Created
  • Last Reply

Top Posters In This Topic

well you got 500cc over me... but I got less weight (well if i take the amp n subs out). I also got mandrel bent extractors and 2.5" exhaust all the way (my only claim to mods), front n rear struts, and apparently aftermarket shocks... so it should be good. My tyres are wierd, they're goodyear f1's which i swear I will never use in my life again... they slide for any reason. Luckily I got LSD n stuff.

I guess this means its on... next drags we have... we shall race to see who takes home the "consolation prize for n/a drivers" trophy. :)

Guest Boxhead
Originally posted by funkymonkey

well you got 500cc over me... but I got less weight (well if i take the amp n subs out). I also got mandrel bent extractors and 2.5" exhaust all the way (my only claim to mods), front n rear struts, and apparently aftermarket shocks... so it should be good. My tyres are wierd, they're goodyear f1's which i swear I will never use in my life again... they slide for any reason. Luckily I got LSD n stuff.

I guess this means its on... next drags we have... we shall race to see who takes home the "consolation prize for n/a drivers" trophy. :)

you have eagle f1s???

hrrrrmmm thats very interesting, thats what was on my car... both times... i wonder if they have anything to do with it...

im getting an s-afc for when i get the engine put in....should i put it on my car while its n/a and see how much gain there is? just as a reference for u guys?

if its not to much trouble i might do it and get it dyno'd :(

Originally posted by doxximus

im getting an s-afc for when i get the engine put in....should i put it on my car while its n/a and see how much gain there is? just as a reference for u guys?

if its not to much trouble i might do it and get it dyno'd :(

YES!!!! that would be awesome if u could do that :D

  • 2 weeks later...

Just saw this thread, good to see something for us NA boys!!

FunkyMonkey, you are not alone! ive also got the RB20DE in my R32!

regarding the RB30 conversion, a bloke here in canberra is currently doing one with a NICS RB20 head and a GTR twon turbo zorhst manifold, the only problems so far that he has come across is the mounting points for the exhaust manifold dont quite line up as in the tabs on the manifold are in the completely wrong places, nothing that a couple of hours with a welder wont fix!

also with the RB30, the standard head uses a 2 valve per cylinder system while the actual original pistons have allowances for 4 per cylinder (if u get what i mean confused myself with that one!) and where the timing belt tensioner goes, there is a blocked off section of the engine that just requires to be drilled out and a thread tapped into it

almost makes the conversion sound easy!

hehehe yeah conversions always seem so simple

btw, i MIGHT be selling my old rb25de and gearbox ecu and loom after i put the rb25deT in :P

it got me 96rwkw UNTUNED (timing was well off so it should make around 100 maybe more and thats not that far off the r32 gtst's stock power :D

so yes, i will work out what im doing then advertise here first before advertising out to the public (if i decide to sell)

Originally posted by SupaFly Skyline

Just saw this thread, good to see something for us NA boys!!

FunkyMonkey, you are not alone! ive also got the RB20DE in my R32!

I jus got a valuation for my car done... currently its valued at more than an R32 GTSt hehehe reason being that its no longer available for import and R32 compliance plates are rarer than hen's teeth :P

So I think I might keep my "beast" in stock form till I decide to get a better car (betcha I end up with an R32 GTR). I might jus concentrate on the interior (leather upholstery n AV n stuff). Not like I get to go fast these days anyways...

I'm def gettin old... goin fast no longer appeals to me, I like doin the corners and puttin the handling of the car to its limits better.

Guest bucket1

Funkeymonkey am I to believe that you've got some aftermarket extractors on your beast? Did you fit them and if so where did you get 'em. My standard system is about kapoot and I've gotta start looking around, thought I may as well go for the lot. By the way, just thought I'd let you know I recently drove from Tassie to Sunshine Coast and back, not one stone chip.

lol juniorrrrrr (u can change what it says btw)

anyways, yeah i got aftermarket Jasma stainless steel extractors on mine, it came attached to a whole 2.5" mild steel exhaust (all mandrel bent)... but the mild steel went kapoot, and my compliancer put a very restrictive cat in the system creating a bottleneck, so I got rid of it n put a hi flo 2.5" cat and redid the whole exhaust in stainless steel n mated it to the extractors.

All up the extractors were free and the cat back exhaust cost me $900 (with labour... whole job was done in 4 hours).

hey funky......

i made that trip to sydney we were talking about a while ago...

i did get a few stone chips from different things...i was amazed with the amount of skylines and just general imports around the liverpool/enfild/bankstown area where i was staying.....

going to bed, i still tired from leaving melb fri morn, then leaving syd sun morn hehehe

cheers

lol u'r smack bang in the heart of leb/import car city lol...

you'll have plenty of street drags in that area :D and you'll see a lot of done up excels and gemini's too... be careful of them... if you see em juscut em off... they dun deserve to be on the road... don't worry about ettiquette, everybody else in sydney hates em too...

oh and all syd drivers will think you can't drive, so jus run em off the road too...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Unfortunately,  it feels like it's been on the decline for nearly a decade. Especially as wallet racing became popular with them(biggest wallet can pay off a car that wins). It seems like a different mindset kf ownership these days. But, hopefully people like yourself keep some of the skyline scene alive.
    • A bit of data is always good, beats the Facebook experts with their opinions Although the kWs aren't anywhere near what you are after, it should give you a good indication. I have Bosch 1480cc injectors, often called 1650cc (only when run at 4bar). I run mine at 3bar base so I don't thrash the fuel system. Up top, making 437kW with boost dropping, injector duty is at 69% on E80 (might have had some residual 98RON in there)  
    • I have some downtime due to winter, and just wrapped up converting the car over to flex fuel. We don't get E85 at the pump over here in Canada, but I will be running Ignite E90 Race gas. I'll be mixing it with 99-100 RON pump gas and shoot for 50% ethanol content, up to possibly 85% content if there's any noticeable gains. Here's the question. Most I'll ever want to hit is ~600rwkW. I've currently running 1200cc injectors and want to keep them under 90% duty cycle. As per some online injector calculators, I should be good with 1200's well past 600rwkw on E85. As per other calculators, I'll need 1600-2000cc's. The variety is rather amusing.  With you Australians having E85 at the pump, what realistic duty cycles are you seeing in those kW ranges on E50 & E85 on your injectors? Thanks, 
    • No issues here with my PRP gears in an OEM pump housing. I did confirm all housing clearances were to spec prior though. Cheers. 
    • Thread is a bit old but figured id give my input anyway just incase. Have had lots of water problems in my R32 and was getting sick of wet tools in the boot and water filling up half my taillights. I ended up finding that whenever my car had been repainted they didn't reseal the taillights to the body of the car so water was just flowing straight into the boot, this is amplified by all the water around the bootlid being directed down to the taillights so would get pretty wet whenever I washed the car or it rained. You could probably use silicone to seal them to the body but I think from factory they use a roll of automotive grade butyl rubber. Hopefully this helps you if that ends up being how the water is getting in on your car!
×
×
  • Create New...